AIM: To assess the effect of a single dose of Sildenafil citrate on the visual function in men with early-stage age-related macular degeneration(AMD).METHODS: Forty men (mean age 71, range from 55-86 years)with early-stage AMD were prospectively randomized to receive either placebo or Sildenafil citrate (Viagra; Pfizer Inc, New York, NY) 100mg as a single oral dose. Subjects underwent visual acuity, Amsler grid and color discrimination in each eye before and at specific intervals within 9 hours after dosing.RESULTS: Compared with placebo, no pattern of errors were evident in any visual function test following Sildenafil administration. No statistically or clinically relevant changes from baseline were observed in visual acuity or color discrimination. No clinically relevant changes were observed in the Amsler grid. Sildenafil treatment was associated with transient mild or moderate headache and flushing. CONCLUSION: A single 100mg dose of Sildenafil was well tolerated and produced no significant acute visual effects in a sample of men with early-stage AMD.

Septoplasty/septorhinoplasty is a common ear, nose and throat procedure offered for those patients with deviated septum who are suffering from nasal obstruction and functional or cosmetic problems. Although it is a basic and simple procedure, it could lead to catastrophic complications including major skull base injuries which result in cerebrospinal fluid (CSF) leaks. We describe two different cases of traumatic CSF leaks following septoplasty/septorhinoplasty at two different sites. The first patient suffered a CSF leak following septoplasty and presented to Alexandria University Hospital. The leak was still active at presentation and identified as coming from a defect in the roof of the sphenoid sinus and was repaired surgically. The second patient presented 4 days after her cosmetic septorhinoplasty with a CSF leak and significant pneumocephalus. She was managed conservatively. Understanding the anatomical variations of the paranasal sinuses and implementing proper surgical techniques are crucial in preventing intracranial complications when performing either septoplasty or septorhinoplasty. A good quality computed tomography of the nose and paranasal sinuses is a valuable investigation to avoid major complications especially CSF leaks following either procedure.
Cerebrospinal Fluid Leak* ; Cerebrospinal Fluid Rhinorrhea ; Cerebrospinal Fluid* ; Diabetes Insipidus ; Ear ; Humans ; Nasal Obstruction ; Nose ; Paranasal Sinuses ; Pharynx ; Pneumocephalus ; Rhinoplasty ; Skull Base ; Sphenoid Sinus

BACKGROUND: Postoperative nausea and vomiting (PONV) are common following laparoscopic cholecystectomy (LC). Dexamethasone has been reported to reduce PONV. However, there is insufficient evidence regarding the effect of dexmedetomidine in decreasing PONV. This study was designed to compare the effects of a single dose of dexmedetomidine to dexamethasone for reducing PONV after LC. METHODS: Eighty-six adult patients scheduled for LC were randomized to receive either single dose 1 microg/kg of dexmedetomidine (Dexmed group, N = 43) or 8 mg dexamethasone (Dexa group, N = 43) before skin incision. During the first 24 h postoperatively, the incidence and severity of PONV were assessed. Pain and sedation scores were assessed on arrival in the recovery room and early postoperatively. Analgesic and antiemetic consumption during the 24 h after surgery were calculated. Intra-operative and postoperative hemodynamics were recorded. RESULTS: Twenty-one percent of the patients in the Dexmed group developed PONV compared to 28% in the Dexa group (P = 0.6). Severity of PONV was similar between the two groups (P = 0.07). Early postoperatively, pain severity was significantly lower in the Dexmed group, but sedation scores were significantly higher. The first analgesic request was significantly delayed in the Dexmed group (P = 0.02). The total amounts of intraoperative fentanyl and postoperative tramadol administered were significantly lower in the Dexmed group. No difference in ondansetron was noted between the two groups. Mean arterial pressure and heart rate were significantly lower in the Dexmed group after administration of dexmedetomidine. No major side effects were reported. CONCLUSIONS: Dexmedetomidine reduces the incidence and severity of PONV, similar to dexamethasone. It is superior to dexamethasone in reducing postoperative pain and total analgesic consumption during the first 24 h after LC.
Adult ; Arterial Pressure ; Cholecystectomy ; Cholecystectomy, Laparoscopic* ; Dexamethasone* ; Dexmedetomidine* ; Fentanyl ; Heart Rate ; Hemodynamics ; Humans ; Incidence ; Laparoscopy ; Ondansetron ; Pain, Postoperative ; Postoperative Nausea and Vomiting* ; Recovery Room ; Skin ; Tramadol

Adherence to antiretroviral therapy (ART) plays an important role in the treatment outcomes of human immunodeficiency virus (HIV) infection. Poor adherence would result in failure to prevent viral replication as well as an increased risk of developing drug resistance. Adherence to a life long treatment such as antiretroviral therapy is usually a complicated issue that requires careful and continuous collaboration of patient, family and healthcare provider. The objective of this study was to assess adherence to antiretroviral therapy and its associated factors among people living with HIV. This is a health facility-based cross sectional study conducted among adults’ people living with HIV in Omdurman HIV/AIDS centre, Sudan. Data was collected through direct interview using semi-structured questionnaire. There were only 144/846 (17.02%) who adhered to antiretroviral therapy as prescribed by their doctors. The remaining 51.18% were taking the therapy but not regularly, 31.21% were taking it but currently not and 0.59% stated that they have never taken any antiretroviral therapy. Factors associated with poor adherence that have been identified include female gender (Adj. OR = 3.46 (95%CI: 1.46–8.21), P = 0.005), younger age (Adj. OR = 1.14 (95%CI: 1.02–1.28), P = 0.022), being unemployed (Adj. OR = 5.94 (95%CI: 1.51–23.40), P = 0.011), those who were divorced, separated or widowed (Adj. OR = 11.35 (95%CI: 1.74–73.96), P = 0.011) and respondents who perceived that their health status is poor (Adj. OR = 5.21 (95%CI: 1.44–18.81), P = 0.012) or very poor (Adj. OR = 4.04 (95%CI: 1.27–12.81), P = 0.018). Educational level and social support against HIV-related stigma and discrimination were not significantly associated with adherence. Adherence to antiretroviral therapy among the respondents is very poor. Urgent interventions based on modifiable factors and mainly targeting females and younger age group are needed to improve adherence to antiretroviral therapy among people living with HIV.
HIV ; Antiretroviral Therapy, Highly Active ; Therapeutics ; Adult

Aims: The present study aimed to develop a new approach for detecting Salmonella species at picogram levels using magnetic bead (MB) aggregation through loop-mediated isothermal amplification (LAMP). Methodology and results: For the first time to our knowledge, Salmonella LAMP amplicons were analyzed using MB aggregation. LAMPs were conducted with a simple heat block, and the results were compared with those obtained with conventional LAMP-MB techniques. Furthermore, the volume and concentration of MB solutions were optimized. Our method detected Salmonella genomic DNA at a low picogram level (1 pg/µL). The specificity of this method was also examined using other bacterial species. Owing to specific Salmonella primers, the use of LAMPs approach was time effective; because these amplicons could be utilized after 20 min instead of the 1 h needed for conventional methods. Furthermore, LAMP-positive amplicons were rapidly detected within 5 min. Conclusion, significance and impact study: The determination of DNA in biological samples is a recent keystone in genomic analysis techniques. Salmonella is a foodborne pathogen that causes many diseases and, in extreme cases, death. Accordingly, detecting Salmonella has become a vital issue for food safety and security. Combining DNA and MBs on paper helped us to develop a new method for label-free, non-immobilized, naked eye detection of Salmonella. The process is very specific owing to the use of exact primers and does not require heavy or expensive instrumentation. In the future, this method could be applied to biosensors as well as in biomedical and molecular diagnostic fields.
Salmonella

Background: For children with cleft palates, surgeries at a young age are necessary to reduce feeding or phonation difficulties and reduce complications, especially respiratory tract infections and frequent sinusitis. We hypothesized that dexmedetomidine might prolong the postoperative analgesic duration when added to bupivacaine during nerve blocks. Methods: Eighty patients of 1-5 years old were arbitrarily assigned to two equal groups (forty patients each) to receive bilateral suprazygomatic maxillary nerve blocks. Group A received bilateral 0.2 mL/kg bupivacaine (0.125%; maximum volume 4 mL/side). Group B received bilateral 0.2 mL/kg bupivacaine (0.125%) + 0.5 µg/kg dexmedetomidine (maximum volume 4 mL/side). Results: The modified children’s hospital of Eastern Ontario pain scale score was significantly lower in group B children after 8 hours of follow-up postoperatively (P < 0.001). Mean values of heart rate and blood pressure were significantly different between the groups, with lower mean values in group B (P < 0.001). Median time to the first analgesic demand in group A children was 10 hours (range 8-12 hr), and no patients needed analgesia in group B. The sedation score assessment was higher in children given dexmedetomidine (P = 0.03) during the first postoperative 30 minutes. Better parent satisfaction scores (5-point Likert scale) were recorded in group B and without serious adverse effects. Conclusions Addition of dexmedetomidine 0.5 μg/kg to bupivacaine 0.125% has accentuated the analgesic efficacy of bilateral suprazygomatic maxillary nerve block in children undergoing primary cleft palate repair with less postoperative supplemental analgesia or untoward effects.

PURPOSE: The aim of this prospective clinical study was to compare the influence of palatal vault forms on accuracy and speed of intraoral (IO) scans in completely edentulous cases. MATERIALS AND METHODS: Based on the palatal vault form, participants were divided into three equal groups (n = 10 each); Class I: moderate;Class II: deep; Class III: flat palatal vault. A reference model was created for each patient using polyvinylsiloxane impression material. The poured models were digitized using an extraoral scanner. The resultant data were imported as a solid CAD file into 3D analysis software (GOM Inspect 2018; Gom GmbH, Braunschweig, Germany) and aligned using the software’s coordinate system to determine its X, Y, and Z axes. Five digital impressions (DIs) of maxilla were captured for each patient using an intraoral scanner (TRIOS; 3Shape A/S, Copenhagen, Denmark) and the resultant Standard Tessellation Language (STL) scan files served as test models. Trueness was evaluated by calculating arithmetic mean deviation (AMD) of the vault area between reference and test files while precision was evaluated by calculating AMD between captured scans to measure repeatability of scan acquisition. The scan time taken for each participant was also recorded. RESULTS: There was no significant difference in trueness and precision among the groups (P = .806 and .950, respectively). Average scan time for Class I and III palatal vaults was 1 min 13 seconds and 1 min 37 seconds, respectively, while class II deep palatal vaults showed the highest scan time of 5 mins. CONCLUSION Palatal vault form in edentulous cases has an influence on scan time. However, it does not have a substantial impact on the accuracy of the acquired scans.

PURPOSE: The aim of this prospective clinical study was to compare the influence of palatal vault forms on accuracy and speed of intraoral (IO) scans in completely edentulous cases. MATERIALS AND METHODS: Based on the palatal vault form, participants were divided into three equal groups (n = 10 each); Class I: moderate;Class II: deep; Class III: flat palatal vault. A reference model was created for each patient using polyvinylsiloxane impression material. The poured models were digitized using an extraoral scanner. The resultant data were imported as a solid CAD file into 3D analysis software (GOM Inspect 2018; Gom GmbH, Braunschweig, Germany) and aligned using the software’s coordinate system to determine its X, Y, and Z axes. Five digital impressions (DIs) of maxilla were captured for each patient using an intraoral scanner (TRIOS; 3Shape A/S, Copenhagen, Denmark) and the resultant Standard Tessellation Language (STL) scan files served as test models. Trueness was evaluated by calculating arithmetic mean deviation (AMD) of the vault area between reference and test files while precision was evaluated by calculating AMD between captured scans to measure repeatability of scan acquisition. The scan time taken for each participant was also recorded. RESULTS: There was no significant difference in trueness and precision among the groups (P = .806 and .950, respectively). Average scan time for Class I and III palatal vaults was 1 min 13 seconds and 1 min 37 seconds, respectively, while class II deep palatal vaults showed the highest scan time of 5 mins. CONCLUSION Palatal vault form in edentulous cases has an influence on scan time. However, it does not have a substantial impact on the accuracy of the acquired scans.

PURPOSE: The aim of this prospective clinical study was to compare the influence of palatal vault forms on accuracy and speed of intraoral (IO) scans in completely edentulous cases. MATERIALS AND METHODS: Based on the palatal vault form, participants were divided into three equal groups (n = 10 each); Class I: moderate;Class II: deep; Class III: flat palatal vault. A reference model was created for each patient using polyvinylsiloxane impression material. The poured models were digitized using an extraoral scanner. The resultant data were imported as a solid CAD file into 3D analysis software (GOM Inspect 2018; Gom GmbH, Braunschweig, Germany) and aligned using the software’s coordinate system to determine its X, Y, and Z axes. Five digital impressions (DIs) of maxilla were captured for each patient using an intraoral scanner (TRIOS; 3Shape A/S, Copenhagen, Denmark) and the resultant Standard Tessellation Language (STL) scan files served as test models. Trueness was evaluated by calculating arithmetic mean deviation (AMD) of the vault area between reference and test files while precision was evaluated by calculating AMD between captured scans to measure repeatability of scan acquisition. The scan time taken for each participant was also recorded. RESULTS: There was no significant difference in trueness and precision among the groups (P = .806 and .950, respectively). Average scan time for Class I and III palatal vaults was 1 min 13 seconds and 1 min 37 seconds, respectively, while class II deep palatal vaults showed the highest scan time of 5 mins. CONCLUSION Palatal vault form in edentulous cases has an influence on scan time. However, it does not have a substantial impact on the accuracy of the acquired scans.

PURPOSE: The aim of this prospective clinical study was to compare the influence of palatal vault forms on accuracy and speed of intraoral (IO) scans in completely edentulous cases. MATERIALS AND METHODS: Based on the palatal vault form, participants were divided into three equal groups (n = 10 each); Class I: moderate;Class II: deep; Class III: flat palatal vault. A reference model was created for each patient using polyvinylsiloxane impression material. The poured models were digitized using an extraoral scanner. The resultant data were imported as a solid CAD file into 3D analysis software (GOM Inspect 2018; Gom GmbH, Braunschweig, Germany) and aligned using the software’s coordinate system to determine its X, Y, and Z axes. Five digital impressions (DIs) of maxilla were captured for each patient using an intraoral scanner (TRIOS; 3Shape A/S, Copenhagen, Denmark) and the resultant Standard Tessellation Language (STL) scan files served as test models. Trueness was evaluated by calculating arithmetic mean deviation (AMD) of the vault area between reference and test files while precision was evaluated by calculating AMD between captured scans to measure repeatability of scan acquisition. The scan time taken for each participant was also recorded. RESULTS: There was no significant difference in trueness and precision among the groups (P = .806 and .950, respectively). Average scan time for Class I and III palatal vaults was 1 min 13 seconds and 1 min 37 seconds, respectively, while class II deep palatal vaults showed the highest scan time of 5 mins. CONCLUSION Palatal vault form in edentulous cases has an influence on scan time. However, it does not have a substantial impact on the accuracy of the acquired scans.