STUDY DESIGN: A retrospective computed tomography (CT)-based morphometric study of 82 occipital condyles in the Indian population, focusing on critical morphometric dimensions with relation to placing condylar screws. PURPOSE: This study focused on determining the feasibility of placing occipital condylar screws in an Indian population using CT anatomical morphometric data. OVERVIEW OF LITERATURE: The occipital condylar screw is a novel technique being explored as one of the options in occipitocervical stabilization. Sex and ethnic variations in anatomical structures may restrict the feasibility of this technique in some populations. To the best of our knowledge, there are no CT-based data on an Indian population that assess the feasibility of occipital condylar screws. METHODS: We measured the dimensions of 82 occipital condyles in 41 adults on coronal, sagittal, and axial reconstructed CT images. The differences were noted between the right and left sides and also between males and females. Statistical analysis was performed using the t-test, with a p-value of < 0.05 considered significant. RESULTS: Mean sagittal length and height were 17.2±1.7 mm and 9.1±1.5 mm, respectively. Mean condylar angle/screw angle was 38.0°±5.5° from midline, with mean condylar length and width of 19.6±2.6 mm and 9.5±1.0 mm, respectively. Average coronal height on the anterior and posterior hypoglossal canal was 10.8±1.4 mm and 9.0±1.4 mm, respectively. The values in females were significantly lower than those in males, except for screw angle and condylar width. Based on Lin et al.'s proposed criteria, eight of 82 condyles were not suitable for condylar screws. CONCLUSIONS: Preliminary CT morphometry data of the occipital condyle shows that condylar screws are anatomically feasible in a large portion of the Indian population. However, because a small number of population may not be suitable for this technique, meticulous study of preoperative anatomy using detailed CT data is advised.
Adult ; Female ; Humans ; Male ; Retrospective Studies

STUDY DESIGN: A retrospective computed tomography (CT)-based morphometric study of 84 C1pedicles in an Indian population focusing on critical morphometric dimensions vis-a-vis C1 pedicle screw placement. PURPOSE: To determine the feasibility of C1 pedicle screw placement in an Indian population and propose a novel classification system for the same. OVERVIEW OF LITERATURE: At present, C1 pedicle screws are rarely used, and very few studies have focused on the feasibility of pedicle screw placement in terms of racial, gender, and ethnic variations in anatomical structures. There are no CT-based data on C1 pedicles that assess the feasibility of pedicle screw placement in the Indian population. METHODS: We measured C1 pedicle diameter on CT coronal scan images of 42 adult patients. Extramedullary height (EMH) and intramedullary height (IMH) were measured. We examined the differences between the right and left atlas pedicles and compared measures between males and females. These data were analyzed using significance tests. Based on the results, we propose a novel classification system, which we believe will help in determining the feasibility of C1 pedicle screw placement. RESULTS: Forty-two adult patients (84 pedicles) were examined. Average EMH and IMH were 4.48±0.91 and 0.86±0.77, respectively. Approximately, 32% of the C1 pedicles had bone thicknesses of <4 mm, 49% had IMH of <1 mm, and 38% had no pedicles. The average thickness in women was 4.21±0.93 mm, which was significantly thinner than that in men (4.73±0.81 mm, p=0.004). Right and left pedicles were not significantly different. CONCLUSIONS: Our data indicate that approximately one-third of the Indian population may not be suitable candidates for C1 pedicle screw placement. Caution should be exercised while placing type 1B and type 2 pedicles based on our proposed classification system.
Adult ; Classification* ; Female ; Humans ; Male ; Pedicle Screws* ; Retrospective Studies

Treatment of bovine mastitis caused by Staphylococcus (S.) aureus is becoming very difficult due to the emergence of multidrug-resistant strains. Hence, the search for novel therapeutic alternatives has become of great importance. Consequently, bacteriophages and their endolysins have been identified as potential therapeutic alternatives to antibiotic therapy against S. aureus. In the present study, the gene encoding lysin (LysSA4) in S. aureus phage SA4 was cloned and the nucleotide sequence was determined. Sequence analysis of the recombinant clone revealed a single 802-bp open reading frame encoding a partial protein with a calculated mass of 30 kDa. Results of this analysis also indicated that the LysSA4 sequence shared a high homology with endolysin of the GH15 phage and other reported phages. The LysSA4 gene of the SA4 phage was subsequently expressed in Escherichia coli. Recombinant LysSA4 induced the lysis of host bacteria in a spot inoculation test, indicating that the protein was expressed and functionally active. Furthermore, recombinant lysin was found to have lytic activity, albeit a low level, against mastitogenic Staphylococcus isolates of bovine origin. Data from the current study can be used to develop therapeutic tools for treating diseases caused by drug-resistant S. aureus strains.
Animals ; Base Sequence ; Cloning, Molecular ; Gene Expression Regulation, Viral/physiology ; Mucoproteins/genetics/*metabolism ; Phylogeny ; Polymerase Chain Reaction/methods ; Recombinant Proteins ; Staphylococcus Phages/genetics/*metabolism/physiology ; Staphylococcus aureus/*virology

No abstract available.
Paroxetine*

BACKGROUND: Aberrant myeloid antigen (MA) co-expression and high expression of CD34 antigen on the blasts of acute lymphoblastic leukemia (ALL) patients are independently reported to have a role in pathogenesis and prognosis. This study was conducted to determine whether these two parameters are related. METHODS: A total of 204 cases of ALL were included in an analysis of blast immunophenotypic data. CD34 expression was categorized as low when less than 50% of blasts were CD34-positive (CD34low) and as high when 50% or more were CD34-positive (CD34high). RESULTS: Of 204 cases of ALL, 163 and 41 were of B-cell origin (B-ALL) and T-cell origin (T-ALL), respectively. Of all cases, 132 (64.7%) showed co-expression of MA and among these, 101 (76.51%) were CD34high, while the remaining 31 (23.48%) were CD34low. Of 72 cases without MA co-expression, 25 (34.72%) were CD34high and 47 (67.25%) were CD34low. Furthermore, of 163 cases of B-ALL, 111 showed co-expression of MA and 84 of these were CD34high. Of 52 cases of B-ALL without MA expression, 22 were CD34high. Among 41 cases of T-ALL, 21 co-expressed MA, 17 of which were CD34high. Moreover, all 20 cases of T-ALL without co-expression of MA were CD34low. These differences were statistically significant. CONCLUSION: We observed a strong correlation between aberrant MA expression and CD34high expression on the blasts of ALL. We hypothesize that these different patient subsets may represent unique prognostic characteristics.
Antigens, CD34 ; B-Lymphocytes ; Flow Cytometry ; Humans ; Immunophenotyping ; Precursor Cell Lymphoblastic Leukemia-Lymphoma* ; Precursor T-Cell Lymphoblastic Leukemia-Lymphoma ; Prognosis ; T-Lymphocytes ; Tertiary Care Centers*

Objective: Due to its comprehensive, reliable, and valid format, the objective structured clinical examination (OSCE) is the gold standard for assessing the clinical competency of medical students. In the present study, we evaluated the importance of the OSCE as a learning tool for postgraduate (PG) residents assessing their junior undergraduate students. We further aimed to analyze quality improvement during the pre-coronavirus disease (COVID) and COVID periods. Methods: This quality-improvement interventional study was conducted at the Department of Obstetrics and Gynecology. The PG residents were trained to conduct the OSCE. A formal feedback form was distributed to 22 participants, and their responses were analyzed using a five-point Likert scale. Fishbone analysis was performed, and the ‘plan-do-study-act’ (PDSA) cycle was implemented to improve the OSCE. Results: Most of the residents (95%) believed that this examination system was extremely fair and covered a wide range of clinical skills and knowledge. Further, 4.5% believed it was more labor- and resource intensive and time-consuming. Eighteen (81.8%) residents stated that they had learned all three domains: communication skills, time management skills, and a stepwise approach to clinical scenarios. The PDSA cycle was run eight times, resulting in a dramatic improvement (from 30% to 70%) in the knowledge and clinical skills of PGs and the standard of OSCE. Conclusion The OSCE can be used as a learning tool for young assessors who are receptive to novel tools. The involvement of PGs in the OSCE improved their communication skills and helped overcome human resource limitations while manning various OSCE stations.

Purpose:: The technology of 3D printing (3DP) exists for quite some time, but it is still not utilized to its full potential in the field of orthopaedics and traumatology, such as underestimating its worth in virtual preoperative planning (VPP) and designing various models, templates, and jigs. It can be a significant tool in the reduction of surgical morbidity and better surgical outcome avoiding various associated complications. Methods:: An observational study was done including 91 cases of complex trauma presented in our institution requiring operative fixation. Virtual preoperative planning and 3DP were used in the management of these fractures. Surgeons managing these cases were given a set of questionnaire and responses were recorded and assessed as a quantitative data. Results:: In all the 91 cases, where VPP and 3DP were used, the surgeons were satisfied with the outcome which they got intraoperatively and postoperatively. Surgical time was reduced, with a better outcome. Three dimensional models of complex fracture were helpful in understanding the anatomy and sketching out the plans for optimum reduction and fixation. The average score of the questionnaire was 4.5, out of a maximum of 6, suggesting a positive role of 3DP in orthopaedics. Conclusion: 3DP is useful in complex trauma management by accurate reduction and placement of implants, reduction of surgical time and with a better outcome. Although there is an initial learning curve to understand and execute the VPP and 3DP, these become easier with practice and experience.