Objective To discuss the application effect of health care failure mode and effect analysis in quality control of polysomnngraphy.Methods The health care failure mode and effect analysis were applied to analyze the process of polysomnngraphy,process reengineering was carried out according to potential risk factors and causes affecting the results of polysomnography in order to ensure the continuous improvement of quality of polysomnography.Results After the improvement of the key link affecting the quality of polysomnography,the number of the patients underwent polysomnography increased from 345 in 2007 to 657 in 2010,the success rate increased from 93％ to 98％ and the doctors' trust level about polysomnography increased from 90％ to 96％.Conclusions Applying the health care failure mode and effect analysis to analyze of key link affecting the quality of polysomnography prospectively and adopting the pertinent countermeasures can effeetively improve the quality of polysomnngraphy.

Objective To investigate outcomes of different operations in treatment of cervical spinal fracture in patients with ankylosing spondylitis and summarize experiences and bases in selection of operation.Methods A retrospective study was done on 19 patients with cervical spinal fracture following ankylosing spondylitis treated between 2005 and 2011 and received complete follow-up.Among them,nine patients were treated with combined anterior and posterior surgical approach (combined treatment group),seven with single posterior surgical approach (posterior approach group) and three with single anterior surgical approach (anterior approach group).Clinical data,follow-up data and image outcome of the patients were collected and compared.Results All patients received average 14 months of follow-up (range,12-20 months).In combined treatment group,the fracture was healed at postoperative 4-6 months.One patient had palsy of recurrent laryngal nerve but was recovered at postoperative three months.Seven patients with incomplete spinal cord injury had at least one level improvement in neurological function according to American Spinal Injury Association (ASIA) classification.No implant loosening or shifting were found in internal fixation.In posterior approach group,fracture was healed at postoperative 4-6 months,with no surgical complications,loosening or shifting of implants.Five patients with incomplete spinal cord injury had at least one level improvement in neurological function according to ASIA classification.In anterior approach group,an additional operation for implant loosening was performed in one patient at postoperative four weeks.The other two patients obtained fracture healing at postoperative four and five months respectively,without implant loosening.Condusions Combined anterior and posterior approaches can not only be the first choice for treatment of cervical spinal fracture following ankylosing spondylitis,but also be used for patients with bone defect at fracture site or separation at fracture end,with no necessity of postoperative external fixation.Single posterior reduction and fixation can be considered in patients with transvertebral fracture in the absence of bone defect,separation at fracture end,displacement or slight displacement,with necessary postoperative external fixation.However,single anterior fixation takes risk of implant failure and needs postoperative external fixation.

Objective To evaluate the role of the short-segment transpedicular instrumentation and fusion in the treatment of thoracic and lumbar spine unstable fractures. Methods We reviewed 121 patients of thoracic and lumbar vertebral fractures treated by short-segment transpedicular instrumentation (attachment of one level above the fracture to one level below the fracture) by using an AO Universal Spine System (USS), plus posterolateral fusion by using autogenous iliac crest bone graft. Results Out of the 121 cases, 104 had been followed clinically, radiographically, and functionally for 12 to 72 months (mean 31.3 months). Follow-up observations showed that, 101 patients (97.1%) had neurological function improvement more than one Frankel grade (3 no change), the average loss of vertebral body height basically reversed to normal (mean 58.3% preoperatively versus mean 3.2% postoperatively, with mean loss of 2.1% in follow-up), and the kyphotic angles were basically corrected (mean 29?preoperatively versus mean 3.4?postoperatively, with mean loss of 3.4?in follow-up). Conclusions The short-segment transpedicular instrumentation and fusion can provide excellent reduction and fixation, indirect decompression, and stabilization for unstable thoracic and lumbar fractures. The USS may be effectively employed in the short-segment fixation of thoracic and lumbar fractures.[

Objective To summarize the clinical outcome of single posterior fixation and fusion in treatment of cervical spinal fracture combined with ankylosing spondylitis.Methods A total of 26 patients with cervical spinal fracture combined with ankylosing spondylitis admitted for surgical treatment from June 2003 to June 2008 were reviewed to analyze parameters including injury mechanism,injury severity,treatment course,operation records,postoperative follow-up and rehabilitation and evaluate neurologic recovery and fracture healing by using American Spinal Injury Association(ASIA)classification.Results A single posterior surgical procedure was performed in six patients,of whom the spinal cord function were rated at grade A in two patients,at grade B in one,at grade C in two and at grade D in one according to ASIA classification criteria.All patients were treated with posterior reduction and lateral mass fixation plus fusion.Two patients at grade ASIA A died of respiratory failure at 2 and 3 months respectively after operation.The other four patients were followed up for 12-54 months(mean 37 months),which showed solid fusion at average 3.8 months after operation and significant improvement of neural function.One patient with aggravated symptoms of spinal epidural hematoma at grade ASIA B was improved to grade D postoperatively.The patients at grades C and D recovered to normal.Hyponatremia occurred in two patients at grade ASIA A.There was no instrumentation related complications in all patients.Conclusions For cervical spinal fractures combined with ankylosing spondylitis without bone defect at fracture end,lateral mass fixation and autologous bone graft through a single posterior approach can attain stable fracture healing after sound reduction.

Objective To investigate the factors influencing prognosis in surgical treatment of thoracolumbar spinal injury combined with spinal cord injury so as to assist in the clinical treatment.Methods A retrospective study was made on 77 cases of acute thoracolumbar spinal injury combined with spinal cord injury admitted from July 2005 to April 2011.There were 66 men and 11 women,aged 14-66 years (mean,36.5 years).Neurological performance evaluated using American Spinal Injury Association (ASIA) scale was grade A in 31 cases,grade B in 11 cases,grade C in 10 cases,and grade D in 25 cases.Potential factors affecting the prognosis of spinal cord injury were identified using univariate analysis and incorporated into the Logistic regression equation to filter out the main influencing factors.Results Fifteen cases dropped out at a mean 55.5-month follow-up (range,24-96 months) and follow-up rate was 81％.Univariate analysis selected fracture or dislocation types (P ＜ 0.01),combined injury (P ＜ 0.05),use of glucocorticoid within 8 hours postinjury (P ＜ 0.05),standard transport by medical professionals (P ＞ 0.1),complete injury (P ＜ 0.01),visiting time (P =0.055),cause of disease before operation (P ＜ 0.05) and canal encroachment rate (P ＜ 0.01) as predictors of neurologic recovery in spinal cord injury (P ＜ 0.1).Logistic regression analysis revealed significant prognostic factors were canal clearance (P ＜ 0.01) and use of steroids within 8 hours postinjury (P ＜ 0.05).Conclusion Glucocorticoid pulse therapy within 8 hours postinjury and adequate spinal cord decompression may effectively improve the neurologic prognosis in thoracolumbar spinal injury with spinal cord injury.

Objective To investigate if immunological factors associated with the false HIV screening test results in RA.Methods Subjects who attended the Rheumatology Outpatient Clinic -Internal Medicine Unit of Guanghua Integrative Hospital , from October 2013 to October 2014, who met the American College of Rheumatology /European League Against Rheumatism Criteria for RA were recruited for the study . 100 subjects with RA were recruited.Each patient underwent clinical examination and blood sampling for assessment of serum HIV screening test and Rheumatoid factors ( RF-IgA, -IgG, -IgM) and anti-cyclic citrullinated protein antibodies (anti-CCP) were purified from the plasma and detected by ELISA , Samples were collected and processed using standard protocols and were stored in the same freezer before analysis . RA patients were divided into two groups based on the titters of RF and anti -CCP:RF <18 U/ml/anti-CCP <25 U/ml group and RF >300 U/ml /anti-CCP >500 U/ml group.HIV screening tests were determined by three methods: ELISA、Immuno-colloidal Golden Method and ECLIA.The positive results were confirmed by the Changning Centers for Disease Control , Shanghai through western -blotting test.Results 100 samples detected by ELISA and Immuno-colloidal Golden Method were given negative results , 16 positive results existed in ECLIA group.There were1,12,3 positive cases in RF-IgM <18 U/ml, RF-IgM and RF-IgG >300 U/ml group(2.7%,32.4%,13.6%;P <0.01).In anti-CCP <25 RU/ml and >500 RU/ml groups there were 2 and 4 positive results(4.7%,24.6%;P <0.01).Conclusions Different HIV screening test methods would give different results , according to operation requirement using second method to determine the HIV screening result.HIV False-positivity was associated with the titers of anti -CCP and RF in RA.

Objective To investigate the percentages of T follicuLar helper cells (Tfh)and interleukin-21(IL-21)in the plasma of patients with rheumatoid arthritis,and the immunological mechanism of Tfh cells in the development of rheumatoid arthritis. Methods According to ACR and DAS28,patients with rheumatoid arthritis were divided into low,moderate and high activity group.The percentages of CD3 + CD4 + CXCR+ 、CD3 + CD4 + ICOS+ and CD3 + CD4 + CXCR+ ICOS+ Tfh cells were detected by Flow Cytometry.While the levels of IL-21 、RF-IgM and anti-CCP in plasma were measured by ELlSA test.The analysis was performed by t-test and Spearman′s correlation analysis.Results The expression of CD3 + CD4 + CXCR+ ICOS+ Tfh cells in PBMCs of rheu-matoid arthritis was significantly higher than that in the normal controls(P <0.05).Meanwhile the results of the three rheumatoid arthritis groups(low,moderate and high activity groups)showed that the expression of Tfh increased accordingly(P <0.05).The expression of Tfh in rheumatoid arthritis was positively related with the levels of IL-21 ,ESR,CRP,RF and anti-CCP respectively. Conclusion The expression of Tfh and IL-21 increases significantly and is closely related to the disease activity in rheumatoid ar-thritis.The results indicate that the abnormality of Tfh may play an important role in the pathogenesis of rheumatoid arthritis.

Objective:To explore the clinical feasibility and effectiveness of using 3D printed porous titanium-alloy prosthesis to repair aseptic large bone defects in the limbs.Methods:A retrospective analysis was performed on 13 patients with aseptic bone defects of long limbs treated with 3D printed porous titanium alloy prosthesis from December 2017 to December 2022, including 7 males and 6 females, aged 52.6±11.5 years (range, 35-72 years). The bone defect locations included 2 humerus, 1 radius, 5 femur, and 6 tibia. One patient suffered both femoral and tibial defects. All 13 patients suffered from bone nonunion due to internal fixation surgery, including 5 cases of hypertrophic nonunion and 8 cases of atrophic nonunion. The interval between internal fixation surgery and this treatment was 20.1±3.6 months (range, 16.5-26.6 months). The clinical treatment effect was evaluated through parameters such as gross observation, imaging evaluation, disability of arm shoulder and hand (DASH), lower extremity functional scale (LEFS), and patient satisfaction evaluation.Results:The length of bone defect after debridement in 13 patients was 11.7±4.5 cm (range, 6.0-20.6 cm), and the length of implant was 12.9±5.3 cm (range, 6.1-22.9 cm). Partial or complete weight-bearing began at 14.8±6.5 days (range, 2-22 days) after surgery. All 13 cases were followed up for 18.3±12.5 months (range, 13-58 months). The X-ray images showed that the prosthesis and the internal fixation were stable, and the new bone gradually grew gradually from the bone defect section and formed stable bone integration with the prosthesis surface, and no prosthesis displacement or fracture occurred. At the last follow-up, the DASH scores of 3 patients with upper limb bone defect were 8.9, 10.5, and 11.2 points, respectively, and the LEFS scores of 10 patients with lower limb bone defect were 49.6±5.9 points (range, 38-56 points). No significant subsidence or loosening of all prosthetics was observed. Patient satisfaction was 9.8±0.1 points (range, 9.6-9.9).Conclusion:After the application of 3D printed porous titanium alloy prosthesis to repair the aseptic large bone defect of the limbs, the patients can carry weight and function exercise in the early stage, and the function of the affected limbs can recover significantly, and the patients have high satisfaction.

The training of academic postgraduate students in critical care medicine emphasizes basic knowledge and underestimates the importance of clinical practice. Research objectives are innovative, but with a lack of practicability, and thus cannot meet the huge needs for clinical research in this major. Under the guidance of the concept of translational medicine , the training of academic postgraduate students should strengthen clinical observation and systematic learning of clinical knowledge, enhance the accumulation of clinical data, improve the quality of data statistics, reinforce the training on clinical research processes, standards, and methods, and emphasize interdisciplinary and multicenter communication and cooperation, so as to break the barrier between basic and clinical research, broaden scientific research thinking , and improve the comprehensive quality of academic postgraduate students in critical care medicine.

Objective:To analyze and summarize the clinical effects of 3D printed porous titanium-alloy prosthesis implantation in the treatment of long bone defects of lower extremities.Methods:We retrospectively studied the clinical cases with lower extremity bone defect treated by 3D printed porous titanium prostheses from December 2017 to November 2021. 18 patients who were followed up for more than 12 months were included in this study. The enrolled patients included 12 males and 6 females, with an average of 48.9±22.5 years (range, 13-79 years), and an average body mass index of 23.1±4.3 kg/m 2 (range, 17.2-27.1 kg/m 2). There were 14 osteomyelitis-derived bone defects and 4 nonunion-derived bone defects. The bone defect locations included 10 cases of femur and 8 cases of tibia. The average bone defect distance was 13.9±9.7 cm (range, 5.8-31.2 cm), and the proportion of the defect length to the long bone (femur of tibia) was average 33.7%±16.8% (range, 15.0%-63.0%). The clinical efficacy was comprehensively evaluated through gross observation, imaging evaluation, changes in the total length of lower extremities and long bones, femorotibial angle (FTA) measurement, lower extremity functional scale (LEFS), satisfaction, complications and other indicators, focusing on the stabilization mechanism of the prosthesis and the regeneration of new bone. Results:All 18 patients were followed up for 12-35 months, with an average of 16.3 months. Postoperative X-rays at 1, 3, 12 and 24 months showed that new bone could gradually creep along the prosthesis surface. The preoperative bone defect length of long bone and total length of lower limb were respectively 39.4±4.0 cm and 80.5±5.7 cm, which were different from those of the healthy side by 1.6±1.0 cm and 1.5±1.1 cm. One week after implantation, the length of long bone and lower limb was 39.9±3.5 cm and 80.9±6.2 cm, respectively, and the average difference was 1.0±0.6 cm and 0.9±1.1 cm compared with the healthy side. At the last follow-up, the length of long bone and lower limb was 39.7±3.6 cm and 80.9±7.8 cm, with an average difference of 1.8±1.1 cm and 1.0±0.7 cm from the healthy side. There were no significant differences in the length of long bone and lower limbs at the three time points before surgery, one week after surgery and the last follow-up ( F=0.12, 0.04; P>0.05). The average FTA of the affected limb was 174.7° (173.9°, 175.5°), 175.2°(173.5°, 176.4°), and 175.0°(173.5°, 176.3°) at three time nodes, before surgery, one week after surgery and the last follow-up, respectively, and there was no significant statistical difference in pairwise comparison ( Z=0.01, P>0.05). Patients had a mean LEFS score of 50 (46, 51) at the last follow-up, significantly higher than the preoperative score of 20 (17, 21) ( Z=-5.56, P<0.001). The mean satisfaction score of the 18 patients at the last follow-up was 9.7. Two patients (11.1%) had screw fractures but all 3D printed porous titanium alloy prostheses remained stable without significant loosening or displacement. Two patients (11.1%) had nail channel infection of external fixator, all patients with channel infection were cured by intravenous antibiotics combined with local disinfection and dressing change. Conclusion:The implantation of 3D printed porous titanium-alloy prosthesis could efficiently and safely repair the long bone defects of the lower extremities. The prosthesis could maintain stable in the early and middle postoperative period. The length of the long bones and lower limbs did not change significantly with the weight-bearing and functional exercise of the limbs. The new bone could gradually crawl and grow from both ends of the defect, and the patient's limb function recovered significantly, and the patient's satisfaction was high.