Objective To investigate the relationship between the C825T polymorphism of G protein β3 subunit (GNB3) and essential hypertension and cerebral infarction patients with a history of hypertension. Methods The C825T polymorphism of GNB3 was determined by polymerase chain reaction-restriction fragment length polymorphism in 110 healthy subjects aged over 40 years, 92 patients with essential hypertension, and 80 cerebral infarction patients with a history of hypertension. Sex, age, family histories of diabetics, smoking and alcoholic consumption were documented, and body mass index, waist-hip ratio, total cholesterol (TC),triglyceride (TG), high-density lipoprotein cholesterol (HDL-C), and fasting blood glucose concentration were measured. A multivariate logistic regression analysis was used to screen the factors associated with the occurrence of cerebral infarction in patients with hypertension.Results The distribution of the C825T polymorphism of GNB3 in the 3 groups all met the Hardy-Weinberg Law of genetic equilibrium. The genotype frequencies of CC, CT and TT in cerebral infarction patients with a history of hypertension were 33％, 57％, and 20％, respectively; those in patients with essential hypertension were 33％, 42％, and 25％ ; respectively;and those in the control group were 26％, 54％, and 20％, respectively. There were no significant differences (x2 =4. 030, P =0. 402). The allele frequencies of 825T in the 3 groups were 39％, 40％, and 47％, respectively. There were no significant differences (x2 =0. 832). A multivariate logistic regression analysis showed that TC (odds ratio [ OR] 10. 810, 95％ confidence interval [ CI] 2. 64544. 136, P =0. 000), TG (OR 5. 453, 95％ CI 1.662-17. 881, P =0. 005),HDL-C (OR, 0. 181, 95％ CI 0. 041-0. 795, P = 0. 027), blood glucose (OR 2. 386, 95％ CI1.062-5. 363, P =0. 035), and diabetes (OR 7. 156, 95％ CI 1.271-40. 291, P =0. 026) were the independent risk factors for cerebral infarction, and the GNB3 genotype and allele did not enter the model. Conclusions The C825T polymorphism of GNB3 may not be associated with cerebral infarction and essential hypertension.

Propionibacterium acnes infective endocarditis has a low incidence, high mortality rate and insidious manifestation, the delay in diagnosis leads to disease progression, which not only affects the physical and mental health and quality of life of patients, but also brings a heavy burden to their family and society. This article reviews the microbiological characteristics of Propionibacterium acnes, the epidemiological and clinical features of Propionibacterium acnes infective endocarditis, and the current state of diagnosis, treatment and prevention, to provide reference for clinical management of this disease.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Positron emission tomography-computed tomography (PET-CT) has been used to quantify inflammatory response in the body. The aim of the present study was to explore the possibility of using this method to evaluate the stability of atherosclerotic plaques and the efficacy of atorvastatin in stabilizing atherosclerotic plaques. Methods: Twenty New Zealand male white rabbits were included and divided into the atorvastatin intervention group and the control group, with 10 rabbits in each group. Rabbits in both groups were fed with a high fat diet for 20 weeks, and treated with thoracoabdominal aortic balloon-pulling to establish atherosclerosis model at the end of the 2nd week. Rabbits in atorvastatin intervention group was given atorvastatin intragastrically once a day. At the 8th week, thoracoabdominal aortic ultrasound was used to detect plaques in all rabbits. Blood was drawn at the 3rd and the 20th week, respectively, to measure blood lipids, high-sensitive C-reactive protein (hs-CRP) and matrix metalloproteinase-9 (MMP-9). At the end of experiment, survival animals were scanned by ¹⁸F-FDG PET-CT, and the average and maximum standard uptake values (SUVmean, SUVmax) of aortic segments were measured. Thereafter, the animals were sacrificed and aortic specimens of rabbits were taken and examined by immunohistochemistry. The pathological indexes were measured and compared. Results: At the end of experiment, the total cholesterol (TC), triglyceride (TG), low-density lipoprotein cholesterol (LDL-C), hs-CRP [ (4.58±0.51) ng/ml vs.(5.87±0.66) ng/ml, P<0.01], MMP-9[ (43.93±2.16) ng/ml vs. (50.77±2.32) ng/ml, P<0.01], SUVmean (0.59±0.15 vs. 0.68±0.20, P<0.05) , SUVmax (0.68±0.20 vs. 0.81±0.27, P<0.05) , plaque area [ (0.36±0.24) mm² vs. (0.50±0.34) mm², P<0.05) ] and density of macrophage[ (4.34±1.54) % vs. (5.65±1.89) %, P<0.01] in the atorvastatin intervention group were significantly lower than those in the control group. In contrast, fiber cap thickness of the plaque[ (4.12±0.66) μm vs. (2.96±0.37) μm, P<0.01] in the atorvastatin intervention group was higher than that of the control group, and the difference was statistically significant. The arterial plaque areas were positively correlated with SUVmean (r=0.27, P<0.05) and SUVmax (r=0.43, P<0.01) . Fiber cap thickness was negatively correlated with SUVmean (r=-0.38, P<0.05) and SUVmax (r=-0.47, P<0.01) . The density of macrophage were positively correlated with SUVmean (r=0.52, P<0.01) and SUVmax (r=0.51, P<0.01) . Conclusion ¹⁸F-FDG PET/CT can be used to evaluate the efficacy of atorvastatin by the stability of atherosclerotic plaques.