Occupational health literacy （OHL），as an important component of improving national health literacy，is a contributing factor affecting the health of the occupational population. OHL refers to the ability of individuals to gain， understand，and use occupational health information for keeping their own health and promoting group health. OHL competence includes three levels，namely basic competence，information processing competence，and occupational health promotion competence. At present，some domestic and foreign scholars used OHL assessment tools or developed new assessment tools to meet the characteristics of different populations for OHL assessment. Some scholars combined several dimensions for OHL measurement in terms of cultural background，occupational characteristics such as working environment，work behaviors，safety and health training，and added occupation-related dimensions to conduct OHL evaluation. However，it is difficult to obtain reliable results by only relying on one single scale to evaluate the health literacy of various occupational groups. At present， domestic and foreign researches have investigated the intervention of occupational health promotion and its effects，but the relevant literature on OHL intervention based on OHL assessment results of occupational population is relatively limited. In order to meet the requirements of the changing new pattern of occupational health practice，further studies are needed for theoretical research of OHL connotation and denotation，OHL measurement methodology，and OHL intervention strategy.

Objective To observe the genetic damages relate d to occupational exposure to antineoplastic agents without special protective measures in exposed subjects.Methods The damages of DNA and chromosomes of peripheral blood lym-phocytes were determined by comet assay and cytokinesis-block micronucleus test in exposure group consisting of24nurses oc-cupationally exposed to antineoplastic agents without special protective measures and control group consisting of24female doc-tors without exposure to antineoplastic agents in oncology department in a certain hospital.Results The exposure group showed significantly higher micronucleus rate(13.25‰?5.17‰)compared with that of control group(3.79‰?2.19‰),P

Occupational high-altitude disease（OHAD）is the most common occupational disease in high altitude areas，which seriously damage the health and working ability of workers. The influencing factors of OHAD are numerous and complex， including natural environment factors（altitude，low pressure，hypoxia，low temperature，low humidity，strong solar radiation， and variable climate），occupational factors（the way entering the plateau，labor intensity，physical factors，and chemical factors）and individual factors（generation birthplace and long-term residence，gender，age，sleep，mental and psychological factors，smoking，obesity，and illness）. The lack of proper scientific and technical support and corresponding occupational health technical services for high altitude operation are also important influencing factors of OHAD. Effectively avoiding the above factors is the key to prevent and control OHAD. By improving the degree of mechanization and automation of operations， strengthening the research on pathogenesis，scientific oxygen supply technology，real-time occupational health monitoring technology and dynamic monitoring technology of occupational harmful factors，would be helpful to comprehensively prevent and control the occurrence of OHAD，and ensure the occupational health of workers who work at high altitude areas.

OBJECTIVETo investigate the characteristics of exposure to iron oxide nanoparticles in workplace.

METHODSThe real-time particle number (NC), surface area (SAC), and mass (MC) concentrations of nanoparticles were measured in various locations of a selected workplace manufacturing iron oxide nanoparticles. The collected particles were analyzed for morphology and elemental composition.

RESULTSThe average NCs and SACs in milling site (16,566 pt/cm3, 106.082 µm2/cm3), packaging site (12,386 pt/cm3, 89.861 µm2/cm3), shipping site (13,808 pt/cm3, 102.071 µm2/cm3), and product storage room (17,192 pt/cm, 115.044 µm2/cm3) of the yellow powder (α-Fe2O3 . nH2O) were all significantly higher than the workplace background concentrations (11,420 pt/cm3, 85.026 µm2/cm3) (all P<0.05). The NC was highly correlated with the SAC (r= 0.784), while both NC and SAC were loosely correlated with the MC (r1=0.323, r2=0.331). Scanning electron microscopy revealed a spindle-like shape of the iron oxide nanoparticle; the chemical composition of the collected particles contained 19.33 weight percent iron (Fe).

CONCLUSIONThe milling site and product storage room of the yellow powder are exposed to a higher concentration of nanoparticles, which are mainly composed of iron oxide nanoparticles. The NC is highly correlated with the SAC.

Ferric Compounds ; analysis ; Metal Nanoparticles ; analysis ; Occupational Exposure ; Workplace

Objective: To quantitatively compare five occupational health risk assessment models in assessing silica dust hazard risk in small open pits, so as to provide the reference for the research of occupational health risk assessment methodology Methods : Seven small open pits were selected as the evaluation sites. The models from Singapore, the United Kingdom's Control of Substances Hazardous to Health Essentials ( COSHH Essentials ), Australia, Romania, and the International Council on Mining and Metals ( ICMM ) were applied to assessing the occupational health risk of the workers exposed to silica dust. The risk ratios ( RRs ) were calculated, and the parallelism, accuracy and correlation of the evaluation results of the five models were compared. Results : The RRs of the Singaporean model, COSHH model, Romanian model, Australian model and ICMM model were 0.8, 1.0, 0.4, 0.6 and 0.8, respectively. The Singaporean model and the Australian model were able to distinguish transport drivers from sprinkler drivers in the health risk exposed to silica dust, which was consistent with the actual risk of the two posts. Except for COSHH model, the RRs of the other four models were positively correlated ( P<0.05 ); the RRs were all positively correlated with concentration ratios ( CRs ) ( P<0.05 ), and the correlation coefficient between RRs and CRs of the Singaporean model was the largest (0.801). Conclusion Among the five models, the Singaporean model can more accurately evaluate the hazard risk of silica dust in posts of open pits, and has a good correlation with the other models.

Objective: To assess the occupational health risk level of a small-scale furniture manufacturer, and to explore the applicability of the Singapore-developed semi-quantitative occupational risk assessment model for chemical exposure (Singapore model) in small-scale furniture manufacturers, and to provide a basis for the continuous occupational health management of manufacturers. Methods: A small-scale furniture manufacturer was selected as the study subject; an on-site occupational hygiene investigation was performed on the above manufacturer during April to June in 2017, and a risk assessment was carried out using the Singapore model. Results: The assessment results of the Singapore model indicated that risk levels of occupational exposure to harmful chemicals for the key positions in the workplace were inconsistent between the actual exposure level method and the exposure index method except for the following: high risk for formaldehyde exposure (risk level: 3.5 and 4.1, respectively) during woodworking process, high risk for dimethyl benzene exposure (risk level: 3.5 and 3.5, respectively) during burnishing process, medium risk for methyl benzene and dimethyl benzene exposure (risk level: 3.0 and 3.4, respectively) as well as for dimethyl benzene exposure (risk level: 3.0 and 3.3, respectively) during primer coating process, medium risk for methyl benzene exposure (risk level: 3.0 and 3.4, respectively) during gel painting process, and medium risk for cyclohexanone exposure (risk level: 2.8 and 2.8, respectively) during oil polishing process. The exposure index method yielded a higher risk level than the actual exposure level method, especially in the risk level of benzene exposure, which was rated as "high" and "very high" by the former but "low" by the latter. Conclusion The Singapore model is suitable for risk assessment of occupational exposure to harmful chemicals in small-scale furniture manufacturers, which can provide a basis for further prevention and control measures taken by manufacturers.

Objective: To pre-assess the occupational hazards in a waste ecological landfill project using comprehensive exposure index with analogy method,and to provide reference for improvement of protective measures and prevention of occupational diseases. Methods: Some enterprises which were comparable with the project in landfill storage capacity,disposal scale,techniques,occupational hazards and occupational health management were selected to carry out on-site occupational health survey,and were evaluated by occupational exposure limits（OEL）. The risk of occupational hazards of the project was assessed by analogy and comprehensive index method. Results: The occupational hazards of analogous enterprises were hydrogen sulfide,ammonia,other dust and noise in ash solidification workshop,paving post in landfill area,spraying post and inspection post in sewage disposal area;manganese and its inorganic compounds,welding fume and arc light in welding post. Except for the noise intensity of spraying post exceeding the national OEL,the other items were qualified. The results of the pre-assessment of the project showed that in the posts with vacant OEL,the hazards of paving compaction post exposed to high temperature in summer,spraying post exposed to high temperature in summer,cypermethrin and machine repairing post exposed to heat,ozone and noise were at moderate risk;in the posts qualified by OEL,the hazards of paving compaction and sewage disposal posts exposed to noise were neglectable,paving compaction and transportation post exposed to other dust were at low risk,others were at moderate risk;unqualified spraying post exposed to noise was at moderate risk. Conclusion Medium-risk occupational hazards exist in paving compaction,spraying,sewage disposal and machine repairing posts. Comprehensive index method combined with analogy method can comprehensively achieve the occupational hazard pre-assessment of a proposed project.

Objective: To investigate the quality of life of the visual display terminal (VDT) operators in Hangzhou Internet enterprises and to analyze its influencing factors. Methods: Through cluster sampling,, 944 employees were investigated by demographic and general health questions and the MOS 36-Item Short Form Health Survey Questionnaire from October to November in 2016 and carried out statistical analysis. Results: VDT operators’ physical functioning, role-physical, bodily pain, general health, vitality, social functioning, role-emotional, mental health, physical component summary and mental component summary scores were (86.3±17.0) , (82.5±30.3) , (80.6±16.1) , (56.8±18.6) , (53.7±15.6) , (78.5±17.8) , (81.2±31.9) , (48.8±19.3) , (51.1±8.9) , (43.8±9.1) . Except physical functioning, role-physical and physical component summary scores, the scores of other scales and mental component summary were lower than the norm (P<0.05) . Multivariable logistic regression showed that vegetable intake, sleeping and physical exercise had an impact on the physical component summary score. The influential factors of mental component summary score included marital status, education, neck pain and health concerns. Conclusion We should pay attention to the quality of life of VDT operators in Internet enterprises, especially their mental health.

OBJECTIVETo study that low-intensity microwave whether or not enhances the genotoxic effects of mitomycin C(MMC) on human lymphocytes.

METHODSSingle strand DNA breaks and chromosomal aberrations were measured by comet assay and cytokinesis-blocked micronucleus(CBMN) test in vitro when human lymphocytes were exposed to 2,450-MHz microwave (5.0 mW/cm2) alone and in combination with mitomycin C.

RESULTSIn the comet assay, the average comet lengths of microwave group[(29.1 +/- 8.1) micron in male and (25.9 +/- 7.5) micron in female] were not significantly different from those of control groups [(26.3 +/- 6.6) and (24.1 +/- 4.3) micron respectively] (P > 0.05). The average comet lengths of MMC group(0.0125, 0.0250, 0.0500, 0.1000 microgram/ml) were significantly longer than those of control groups (P < 0.01) and were increased with the dose of MMC. The average comet lengths of microwave combined with MMC (MW + MMC) also were increased with the doses of MMC and were significantly longer than those of control groups (P < 0.01). When MMC was > or = 0.0250 microgram/ml, microwave and MMC synergistically increased the single strand DNA breaks. In the micronucleus test, the average micronucleus rates of microwave groups were not higher than those of control groups (P > 0.05). The average micronucleus rates of MMC groups and MW + MMC groups were significantly higher than those of control groups (P < 0.01) when MMC was > or = 0.0500 microgram/ml. The average micronucleus rates of MW + MMC groups seemed higher than those of corresponding MMC groups, however the difference was not significant (P > 0.05).

CONCLUSIONLow-intensity(2,450-MHz) microwave did not induce DNA and chromosome damages on human lymphocytes, but enhanced the effects of DNA breaks induced by MMC.

Chromosome Aberrations ; Comet Assay ; DNA Breaks, Single-Stranded ; Female ; Humans ; Lymphocytes ; drug effects ; radiation effects ; ultrastructure ; Male ; Micronuclei, Chromosome-Defective ; Microwaves ; adverse effects ; Mitomycin ; toxicity

Objective: To study the effects p-phenylenediamine (PPD) on lung function and health-related quality of life of occupational exposed workers. Methods: This study was based on data from a company that produce hair dye containing PPD in China. Workers who exposed to PPD were selected as the study group, and workers un-exposed to PPD were selected as the control group. Questionnaires on health-related quality of life of workers using the 36-item Short Form Health Survey (SF-36) . Occupational health examination assessment results were tested in Taizhou Cancer Hospital. The lung function test includes forced vital capacity (FVC) , forced expiratory volume in one second (FEV_1.0) , and ratio of FEV_1.0 to FVC (FEV_1.0/FVC) . Results: The difference in systolic blood pressure between the PPD exposed group and the control group was statistically significant (P<0.05) . FVC, FEV_1.0, and FEV_1.0/FVC of the lung function indexes in the exposed group were lower than those in the control group (P<0.05) . In the health-related quality of life, body pain (P=0.002) , general health (P=0.029) , vitality (P=0.038) , and mental health (P=0.003) were lower in the exposed group than in the control group. Conclusion Occupational exposed to PPD may induce hazard to the workers’lung function and may cause detrimental effect on workers’ health-related quality of life.