Objecltive To intensify the coordination and nursing in the operation room in order to prevent surgical site infection after gastrointestinal operation. Methods 337 medical history of patients received gastrointestinal operation and third rate healing from 1999 to 2006 were collected. A series of intensified measures were applied to surgical site infection from 2003 gradually, including invocation of new surgical handwashing method, modified skin disinfection manner, adoption of degreasing with ethanol first before disinfection with iodophor, placement of incision protector and clean bag for incision protection after entering abdomen, changing to use new gastrointestinal anastomofic thimerosal,standardization of operation order and clean manage-ment in operation room. The incidence rate of surgical site infection after gastrointestinal operation of patients from 1999 to 2002 and from 2003 to 2006 underwent χ2 test. Results The incidence rate of surgical site in-fection after gastrointestinal operation greatly decreased after adoption of intensified nursing intervention, Signifi-cant difference existed in rate of patients with third rate healing between the year 1999 to 2002 and 2003 to 2006. Conclusions Modified nursing intervention for surgical incision after gastrointestinal operation can de-crease incision infection rate evidently.

Objective To establish a method for fingerprint analysis of amino acids from honey by high performance liquid chromatography ( HPLC). Methods Amino acids of honey were concentrated by 732 cation exchange resin, and then were treated by pre-column derivatization with phenyl isothiocyanate, with praline as control peak. The chromatography was performed on a Waters Symmetry C18 ( 250 mm × 4.6 mm × 5 μm) column, with acetonitrile ∶ water (4∶1) as mobile phase A and 30 mmol/L sodium acetate ∶ acetonitrile (355∶15, acetic acid adjusting pH value to be 6.5) as mobile phase B by gradient elution. The detection wave length was set at 254 nm. The flow rate was 1.0 mL/min. The column temperature was 40℃, and the injection volume was 5μL. Results Sixteen common peaks were shown in the fingerprint of 15 batches of honey samples. The similarity for 15 batches of honey samples was in the range of 0.910 ~ 0.996 . Conclusion The fingerprint detection method is simple, practical, reproducible and specific, and can provide certain reference for quality control of honey.

BACKGROUND: Spinal surgical robots are mainly imported from countries outside China. The overall level of automation is still low. Domestic robot’s core technology still has some difficulties to conquer. Domestic robots are in the ascendant. The cost of spinal surgical robots is too expensive to apply in clinic practice. Our research group has developed Orthobot spinal surgical robot system for spine surgery with Shenzhen Xinjunte Company, which may be of great significance to the development of domestic surgical robots. OBJECTIVE: To explore the safety and effectiveness of the application of Orthobot semi-automatic spine surgery robot system in spine surgery in swine lumbar experimental model by analyzing its feasibility so as to optimize surgical procedures. METHODS: Totally 12 swine lumbar samples (L1-L6) were randomly divided into 2 groups. In the experimental group (6 cases), pedicle screw path was planned under the three-dimensional CT data after matching the pre-operative CT images and intra-operative C-arm film. Orthobot spinal surgical robot system was used to locate the pedicle start point automatically and to drill a hole with Kirschner wire into the pedicle. Pedicle screw path was prepared through the Kirschner wire. In the control group (6 cases), X-ray perspective data of C-arm machine during operation were directly used, and the screw path was planned under the two-dimensional X-ray data. The surgical planning time, Kirschner wire implantation time, X-ray exposure time, and total operation time were recorded for further analysis. The accuracy and the excellent and good rate of pedicle screw implantation were evaluated by CT scan according to Abul-Kasimhierarchy grading system. RESULTS AND CONCLUSION: (1) The planning time and the total operation time of single pedicle screw path preparation were lower in the experimental group than in the control group (P < 0.001). X-ray exposure time and Kirschner wire implantation time were not significantly different between the two groups (P > 0.05). (2) Post-operation CT evaluation showed that the excellent and good rate of pedicle screw path preparation was significantly better in the experimental group 96.7% (58/60) than in the control group 85.0% (51/60) (P < 0.05). (3) Results suggested that compared with intraoperative C-arm, the application of Orthobot semi-automatic spine surgery robot system combined with preoperative CT and intraoperative C-arm has high accuracy, safeness and effectiveness. However, the registration and matching time of the system is increased and the total operation time is long.

Objective To analyze the effect of Noggin silencing on the BMP and Wnt signaling pathways in hair follicle development.Methods The expression of BMP-2, BMP-4, BMPR-IA, BMP-6, BMP-7, LEF-1 andβ-catenin in Noggin silencing MC3T3-E1 stable cell line was detected by RT-PCR and western blot.Results RT-PCR results showed that the expressions of five genes in BMP signaling pathway were all significantly influenced by Noggin silencing, the ex-pressions of BMP-2 (P<0.001), BMP-4 (P<0.01), BMP-6 (P<0.001) and BMP-7 (P<0.001) were all increased and the expression of BMPR-IA (P<0.01) was decreased.While the expressions of the two genes LEF-1 (P<0.001) and β-catenin ( P<0.001) in Wnt signaling pathway were significantly decreased.Western blot results showed that the ex-pressions of these proteins in the two signaling pathways were also affected.The expressions of BMP-2 (P<0.05), BMP-4 (P<0.05), BMP-6 (P<0.05) and BMP-7 (P<0.05) were all increased, while the expressions of BMPR-IA (P<0.05), LEF-1 (P<0.01) andβ-catenin (P<0.001) were decreased.Conclusions There may be a negative feedback regulation of Noggin on the BMP signaling pathway in vitro, but a positive feedback regulation on the Wnt signaling pathway in vitro.It provides certain evidence for studies on the effect of Noggin gene on BMP and Wnt signaling pathways in vivo. There may be an interaction between hair follicle development-related signaling pathways, which still needs further experi-ments to prove.

Purpose To investigate the effects ofβ-1apachone on inhibition of pro1iferation and migration and induction of apoptosis in gastric cancer ce11s in vitro. Methods The ce11 viabi1ity was detected using MTT and co1ony formation assay,the migration abi1ity was determined using scratch assay method,and the apoptosis was examined using f1ow cytometry. Meanwhi1e,the expression of biomarkers of pro1iferation,EMT markers andapoptosiswere detected using Western b1ot ana1ysis. Results β-1apachone cou1d significant1y inhibit the pro1iferation of SGC-7901 and AGS gastric cancer ce11s( P<0. 05),and down-regu1ate the expression 1eve1s of Skp2 and DEK pro-teins. β-1apachonecou1d a1so inhibited the invasion and moti1ity of gastric cancer ce11s via down-regu1ating the expression 1eve1s of MMP-2/9 and Ezrin proteins and up-regu1ating the epithe1ia1 markers. In addition,β-1apachone enhanced the apoptosis of gastric canc-er ce11s,down-regu1ation of BCL-2/Bax ratio and up-regu1ation of activated Caspase-3/8/9. Conclusions β-1apachone can effective1y inhibit the pro1iferation and induce the apoptosis of gastric cancer ce11s,and inhibit the migration of gastric cancer ce11s via MMPs and EMT pathways.

Objective To investigate the expression and significance of transforming growth factor beta receptors (TGF?RⅠ, TGF?RⅡ) in basal cell carcinoma and squamous cell carcinoma. Methods The expression of TGF?RⅠand TGF?RⅡwere assessed by quantitative real-time PCR and streptavidin -peroxidase (SP) immunohistochemical techniques in specimens of basal cell carcinoma, squamous cell carcinoma and normal control skin. Results Eighteen patients with basal cell carcinoma and twenty-four with squamous cell carcinoma were enrolled in the study. The expression levels of TGF?RⅠand RⅡmRNA were significantly down-regulated in basal cell carcinoma and squamous cell carcinoma in comparison with those in control skin specimens (P

Objective To knockout the MATP gene of mouse melanoma cell line B16F10 using CRISPR/Cas9 system,and to lay foundation for the functional study of MATP gene.Methods Specific primers of MATP were designed according to the report in http://crispr.mit.edu/ website.The primers were linked to pCAS9/gRNA1 vector.Then the positive vector was transfected into mouse melanoma B16F10 cells,and monoclonal cell lines were obtained by the infinite dilution method.After the genomes of different monoclonal cell lines were extracted and sequenced,the cell lines with MATP gene cleavage were screened,and the expression of MATP in these cell lines was verified by Western-blot analysis.Results Three MATP gene knockout cell lines were successfully obtained.The western-blot results showed that the cell lines did not express MATP protein.Conclusions The knockout of MATP gene in B16F10 cell line can be successfully achieved using the pCAS9/gRNA1 vector.

Objective To explore MSCT optimal examination time window for patients with occult rib fracture, and provide objective evidence for forensic injury. Methods Totally 105 cases with chest trauma were retrospectively analysed. They were examined in the first week after trauma and re-examined in different time windows by MSCT. The quantities of occult rib fractures in the first examination were compared to those in re-examinations. Results The quantities of occult rib fractures at different inspection time windows were mostly different. There was no statistically significant between the quantities of rib fractures in the first week and the second week, the first week and the sixth week later, the fourth week and the fifth to sixth weeks (P>0.05). There was statistically significant between the quantities of rib fractures in the first week and the thrid to sixth weeks, the second week and the third to sixth weeks, the third week and the fourth to sixth weeks (P<0.05). Conclusion The result of the study imply that the fourth to sixth week is the optimal time window of MSCT examination in the occult rib fracture.

AIM:To investigate the role of Rho-associated kinase ( ROCK) inhibitor fasudil in the formation of rabbit urethral stricture after injury and to observe the cell activity , migration and extracellular matrix synthesis in the rabbit urethra fibroblasts.METHODS:The rabbit model of urethral stricture was established by microsurgical techniques .The rabbits were divided into sham operation group , operation group and fasudil (3 mg/kg, 10 mg/kg, 30 mg/kg) groups.The diameter of the stenosis was measured by retrograde urethrography 3 months after surgery .The fibroblasts were isolated from urethral scar, and then incubated with fasudil (12.5 μmol/L, 25 μmol/L, 50 μmol/L) in the presence of transforming growth factor-β1 (TGF-β1, 10 μg/L).The untreated cells were used for control .The cell activity was measured by MTT assay.The cell migration ability was tested by the method of Transwell chambers .The protein expression of ROCK , α-smooth muscle actin (α-SMA) , collagen I and collagen III was determined by Western blot analysis .RESULTS:Fasudil significantly reduced formation of urethral stricture after injury (P<0.05).Cultured rabbit fibroblasts with different con-centrations of fasudil inhibited the cell activity and cell migration ability (P<0.05).The protein expression of ROCK,α-SMA, collagen I and collagen III was also inhibited by treatment with fasudil in a dose -dependent manner ( P<0.05 ) . CONCLUSION:Fasudil inhibits the formation of extracellular matrix and reduces the incidence of urethral stricture after injury by down-regulating TGF-β1-induced Rho/ROCK pathway activation in the rabbit urethra fibroblasts .

Objective:To explore the significance of digital orthopedic technology in surgical plan for spinal tumor and the preliminary outcomes of 3D printed vertebral bodies in spinal tumor surgery.Methods:The clinical data of 2 patients were retrospectively analyzed who had had a 3D printed vertebral body implanted at Center of Orthopaedics, Shenzhen Hospital from June 2018 to December 2019. One was a 32-year-old male, diagnosed with cervical neurinoma; the other was a 27-year-old female, diagnosed with giant cell tumor of lumbar bone. 3D virtual reconstruction of tumor and surrounding structures was established via Mimics software for surgical plan. Virtual osteotomy was simulated, their disease models and guide templates were 3D printed, and their metal artificial vertebral bodies were 3D printed after personalized design of the vertebral body diameter, porosity and procedures of reconstruction and fixation. Lesion resection and prosthesis implantation were carried out in accordance with the preoperative plan. After operation, the motor function of cervical or lumbar vertebrae, tumor recurrence, and spinal stability reconstructed were regularly observed.Results:Resections and reconstructions went uneventfully in both cases. The 2 patients were followed up for 21 and 13 months respectively. Their postoperative images showed that their 3D printed vertebral bodies fitted the neighboring vertebral bodies well. The spinal stability was reconstructed without any loosening or periprosthetic osteolysis, and the tumors were removed completely with no recurrence in both cases. Their spinal motor function was satisfactory.Conclusions:Digital orthopedic technology can offer accurate guidance in the treatment of spinal tumors. It is necessary to consider local physiological anatomy in personalized design of a metal vertebral body 3D printed. Clinical application of 3D printed metal vertebral bodies is a new strategy for spinal reconstruction following spinal tumor resection.