[Objective]The purpose of this study was to describe mid report the result of the ulnar nerve transfer to biceps muscle to restore elbow flexion after acute and delayed upper brachial plexus injuries.[Methods]Two patients with acute brachial plexus injury (the time between the injury and the operation were six and eight months) and three patients with delayed brachial plexus injury(the time between the injury and the operation were from twevle to eighteen months) underwent nerve transfer using fascicles of the ulnar nerve to the motor branch of the biceis muscle. The average age of the patients was twenty eight and the mean follow-up periods were nine months after the surgery. Patients were evaluated with regard to reinnervation of the biceps, ulnar nerve function, elbow flexion strength, and grip strength.[Results]For the two acute patients, the first sign of biceps muscle contraction were observed within 1 week, the average time required for reinnervation of the biceps after nerve fascicle transfer was within six months. For the three delayed patients, the first sign of bicep muscle contraction was observed in about three month, and the average time required for reinnervation of the biceps was ten months.Hypoesthesia of the ulnar nerve was clinically abserved in three patients, but this symptom disappeared within month with no treatment.Compared with those delayed cases, the acute patients had faster and better recovery of their olbow flexion function.However, all patients achieved grade-3 or better elbow flexion strength according to the grading system of the Medical Research Council.[Conclusion]The author recommend this safe, simple and effective Oberlin procedure for brachial plexus injuries involving the C5、6 or C5~7 nerve roots.

A PP plastic film for food packaging (0. 1 mm) was prepared by adding two antioxidants of 2,6-di-tert-butyl-4-methyl-phenol(BHT) and pentaerythritol tetrakis ( 3-( 3, 5-di-tert-butyl-4-hydroxyphenyl ) propionate)(Irganox 1010) with different concentrations into polypropylene (PP) resin, then mixing extrusion granulate by the double screw plastic extruder and hot pressing the film at 190℃. The migration amount of the two antioxidants in food simulants (95% ethanol) was determined by high performance liquid chromatography (HPLC) with diode array detector (PDA) (detection wavelength is 282 nm). The migration of BHT was detected and Irganox 1010 was not detected. Based on the large amount of experimental data, the migration model was fitted by a software, then the migration model of antioxidant BHT was established, the applicability of the two migration model was compared with the actual data. The results showed that the fitting degree ( R2 ) of Weibull model to the actual migration result was greater than 0. 99 and better than Piringer model. It was found that there was a mathematical relationship as τ≈12. 2 ( L2/D) between parameters of Weibull model and Piringer model.

Objective To evaluate multi-slice three-dimensional CT angiography (MS 3D-CTA) for the follow-up of intracranial aneurysm clipping.Methods MS 3D-CTA of 16 patients with intracranial aneurysm clipping were retrospectively analyzed.The patients were scanned on a 16-slice spiral CT(GE Lightspeed pro).Volume rendering(VR),thin maximum intensity projection(thin MIP) and multi-planar reconstruction (MPR) were employed in image postprocessing in all cases.Results There were 17 clips in the 16 patients with aneurysm clipping.Six clips were located at the posterior communicating artery,5 at the anterior communicating artery,4 at the middle cerebral artery,and the remaining 2 clips were located at the pericallosal artery in 1 patient.There were no abnormalities found in the aneurysm clipping region in 7 cases by MS 3D-CTA.There were residual aneurysm in 2 cases,parent artery stenosis in 4 cases,and artery spasm in 3 cases.There was no parent artery occlusion and clip displacement in all cases.VR showed excellent 3D spacial relations between the clip and parent artery in 12 cases,and showed good relations in 3 cases.The 1 case with 2 clips in the pericallosal artery showed heavy beam-hardening artifacts.The size and shape of aneurysm clips were clearly depicted by MPR and thin MIP,while 3D spacial relation of aneurysm clip and parent artery were poorly showed.Conclusion MS 3D-CTA is a safe and efficient method for the follow-up of intracranialaneurysm clipping.Combined VR with MPR or thin MIP can well reveal postoperative changes after aneurysm clipping.

Through introducing mutations into ribosomes by obtaining spontaneous drug resistance of microorganisms, ribosome engineering technology is an effective approach to develop mutant strains that overproduce secondary metabolites. In this study, ribosome engineering was used to improve the yield of butenyl-spinosyns produced by Saccharopolyspora pogona by screening streptomycin resistant mutants. The yields of butenyl-spinosyns were then analyzed and compared with the parent strain. Among the mutants, S13 displayed the greatest increase in the yield of butenyl-spinosyns, which was 1.79 fold higher than that in the parent strain. Further analysis of the metabolite profile of S13 by mass spectrometry lead to the discovery of Spinosyn α1, which was absent from the parent strain. DNA sequencing showed that there existed two point mutations in the conserved regions of rpsL gene which encodes ribosomal protein S12 in S13. The mutations occurred a C to A and a C to T transversion mutations occurred at nucleotide pair 314 and 320 respectively, which resulted in the mutations of Proline (105) to Gultamine and Alanine (107) to Valine. It also demonstrated that S13 exhibited genetic stability even after five passages.
Genetic Engineering ; Macrolides ; metabolism ; Point Mutation ; Ribosomal Proteins ; genetics ; Ribosomes ; metabolism ; Saccharopolyspora ; metabolism

Objective:To introduce a reliable and easy method of philtrum crest and philtrum repairing in secondary repair of cleft lip.Methods:Lift the upper lip flap after removing the scar on upper lip. Then the superficial orbicularis oris muscle was carefully separated, which formed the abnormal muscular eminence in the affected side after the first cleft lip repair. The pedicle of the orbicularis oris muscle the reconstructing philtrum crest. The lingual orbicularis oris muscle flap was lifted and curled from outside. The superficialorbicularis oris muscle was cut in philtrum longitudinally and turned outward. The two evertedorbicularisoris muscle flaps were sutured on both sides and fixed them on the reconstructing philtrum crest. The exposed deep orbicularis oris muscle in philtrum was sutured with the upper dermis, which formed the prominentphiltrum crest and deeper philtrum.Results:We reviewed the hospital records of patients from July 2008 to November 2021. In total, 201 patients were included in this study. All of these patients underwent the reconstruction of philtrum crest and philtrum with orbicularis oris muscle intertangling and philtrum plasty in secondary cleft lip repairing. During the treatment, the patients had no complications such as infection, hematoma and flap necrosis.198 patients were observed from 1 months to 36 months (7.8 months on average). All of them improved in different degrees in early postoperative period. Most reconstructed philtrum crest was raised and basically symmetrical with the contralateral side in shape. The philtrum was clear and the scar was not obvious. The reconstructed philtrum crest would decrease with time. 91.7% (90/98) patients were satisfied with the postoperative effects after three months.Conclusions:The method of reconstruction of philtrum crest and philtrum with orbicularis oris muscle intertangling and philtrum plasty in secondary cleft lip repairing is safe and effective. The long term postoperative effect is stable with high satisfaction as well. As a result, this method can be used as the philtrum crest and philtrum correction scheme for secondary cleft lip repairing.

The fcl gene encodes GDP-fucose synthase, which catalyzes two-step differential isomerase and reductase reactions in the synthesis of GDP-L-fucose from GDP-D-mannose. It also participates in the biosynthesis of amino sugar and ribose sugar, and is one of the key enzymes to regulate the metabolism of sugar and nucleotides in organisms. The presence of fcl gene in Saccharopolyspora pogona was found through sequencing result of genome. The mutant S. pogona-fcl and S. pogona-Δfcl were constructed by gene engineering technology. The results showed that the gene had an effects on growth and development, protein expression and transcriptional level, insecticidal activity, and biosynthesis of butenyl-spinosyn of Saccharopolyspora pogona. The results of HPLC analysis showed that the yield of butenyl-spinosyn in S. pogona-Δfcl was 130% compared with that in S. pogona, which reduced by 25% in S. pogona-fcl. The results of determination of insecticidal activity showed that S. pogona-Δfcl had a stronger insecticidal activity against Helicoverpa armigera than that of S. pogona, while the S. pogona-fcl had a lower insecticidal activity against Helicoverpa armigera compared with S. pogona. Scanning electron microscopy (SEM) was used to observe the morphology of the mycelia. It was found that the surface of the S. pogona-Δfcl was wrinkled, and the mycelium showed a short rod shape. There was no significant difference in mycelial morphology between S. pogona-fcl and S. pogona. Aboved all showed that deletion of fcl gene in S. pogona hindered the growth and development of mycelia, but was beneficial to increase the biosynthesis of butenyl-spinosyn and improve insecticidal activity. Whereas the fcl gene over-expression was not conducive to the biosynthesis of butenyl-spinosyn and reduced their insecticidal activity. SDS-PAGE results showed that the difference of protein expression among the three strains was most obvious at 96 hours, which was identified by real-time fluorescence quantitative polymerase chain reaction, the results showed that there were significant differences of related genes in transcriptional levels among the three strains. Based on the results of the study, a network metabolic control map was constructed to analyze the effect of fcl gene on growth and the regulation pathway of butenyl-spinosyn biosynthesis, which provided an experimental basis for revealing the regulation mechanism of butenyl-spinosyn biosynthesis and related follow-up studies.
Bacterial Proteins ; Genetic Engineering ; Insecticides ; Macrolides ; Saccharopolyspora