Objective To observe dynamic responsive regularity of specific IgM and IgG antibodies in SARS patients. Methods 145 specimens of plasma from 25 cases of clinically diagnosed SARS patients were examined in the study. ELISA was employed to detect IgM and IgG antibodies against SARS coronaviral antigens. Nested RT-PCR was used to qualitatively determine SARS coronavirus (SARS-CoV). Results 49.0% (71/145) and 54.5% (79/145) of the samples were positive for IgM and IgG antibodies, respectively. Both antibodies were found to be detected in 84.0% of the patients. The antibodies were found to be detectable from the 2nd to 4th week after the onset of disease in most patients, and there was a fendeney of sising in positive rate until the 5th week after the onset. Thereafter, the detectable rate of IgM antibody began to decline, while that of IgG antibody remained to rise. Positive rate for serum SARS-CoV was 15.8% (18/114) for all samples or 40.0% (10/25) of patients. Most virus-positive samples were those which were collected within 4 weeks after disease onset. Conclusions Anti-SARS-CoV IgM/IgG antibody and detection of virus in plasma could serve as practical diagnostic indicators for SARS. In most cases, when the serum was pasitive for antibody the serum virus positive rate would soon declined. However, concomitant existence of antibody and viral sequence in plasma was observed in a few patients.

Objective·To compare the stress distribution at abutments, edentulous ridge, and peri-implant tissue under the vertical load between the RPI-type removable partial denture supported by implants with different diameter and the conventional RPI-type removable partial denture using a three-dimensional photoelastic method. Methods·The mandibular Kennedy I type denture defect models were fabricated according to the standard mandibular model. Four Straumann system soft tissue level implants with different diameters (two 4.1 mm implants and two 3.3 mm implants) were implanted into the bilateral first molar areas. Planting nails and epoxy resin teeth were inversely put into the mandibular silicone rubber molds to fabricate the epoxy resin photoelastic models and the regular neck (RN) healing abutments were screwed into the implants. A simulated alveolar mucosa with thickness of 2mm and a conventional RPI-type removable partial denture were placed on the epoxy resin models with or without implants. Then a force of 1 kg was vertically applied by a bite force loading device which fixed the model and denture in the centric occlusion. After the stress was frozen, model slices at different areas were cut and the stress fringes were observed. The stress was calculated according to the fringe value of per unit thickness. Results·For the conventional RPI-type removable partial denture, the maximum stress of distal abutment was mainly concentrated on the apical regions and the maximum stress of edentulous ridge was concentrated on the first molar area, particular on the lingual side of alveolar bone. For the implant-supported RPI-type removable partial denture, the maximum stress of distal abutment was lower than that of the conventional RPI-type removable partial denture, and the maximum stress of edentulous ridge (without the implants) was similar to that of abutment and supporting tissues and was lower than that of the conventional RPI-type removable partial denture. The stress around the implant was the largest and the peri-apical stress of implant was greater than the neck stress of implant. Meanwhile, the maximum stress around the implant was increased with the decrease of implant diameter. Conclusion·Compared to the conventional RPI-type removable partial denture, removable partial dentures supported by implants are more stable with a more balanced stress distribution in supporting tissues, thus benefit the health of abutments and supporting tissues.

Objective To collect the information about types and clinically-used materials for the dentures, and evaluate the current conditions and characteristics of prosthodontic treatment in Shanghai. Methods Three municipal public hospitals and two private commercial dental labs in Shanghai were served as sample units. The application information on fixed partial dentures, removable partial dentures and complete dentures from January 2005 to December 2007 was collected. The number of dentures in each sample unit, the total proportion of each type of dentures, and the proportion of each type of dentures in public hospitals or private labs were retrospectively analysed. Results From 2005 to 2007, the number of dentures increased by approximately 20% annually. The number of dentures made in private labs increased by 43.58% in 2005 to 2006 and 23.23% in 2006 to 2007.As to the types of dentures, fixed partial dentures constituted the largest proportion (74.49%-76.19% for public hospitals and more than 80% for private labs), while complete dentures accounted for the smallest proportion (5.07% to6.24% for public hospitals and 1.02% to 1.38% for private labs) . Conclusion With an ever-growing awareness of oral health, prosthodontics has been developing rapidly in Shanghai. The rapid increase trend of private dental clinics is noticeable. Fixed partial dentures constitute the largest proportion, while the proportion of complete denture gradually decreases year by year.

BACKGROUND:Atlantoaxial anatomical structures were special. Compared with thoracolumbar vertebrae, there is no fixed anatomical marker for screw implantation. Moreover, pedicle structural variation is great. The current consensus view is to suggest an individualized program of pedicle screws. The development of orthopedic digital software technology provides a novel manner for preoperative design.
OBJECTIVE:To original y design 3D matrix model, to observe atlas pedicle channel, pedicle screw safety zone, to measure optimal program for screw fixation, and to simplify preoperative design of entering pedicle screw.
METHODS:Continuous atlas CT data of 12 healthy adults in picture archiving and communication system of People’s Hospital, Three Gorges University were imported into Mimics 10.01 software. There were seven males and five females, at the age of 30-65 years old, averagely 45 years. After three-dimensional reconstruction, the three-dimensional reconstruction models were imported into 3Dmax 2009 as .dwg format. The reference three-dimensional planes and the sites of nail insertion were determined by the atlas modeling. The modeling consisted of 17×17×2 elements and the transverse section angles ranged from 0° to 40° and the sagittal section angles ranged from 0° to 40° with a space of 2.5°. 578 elements were used to simulate pedicle screw array model. Perspective observation showed that the diameter was 3.5 mm, and length was 22 mm in pedicle channel. Thus, safety area, best screw channel and screw angle were analyzed.
RESULTS AND CONCLUSION:The total number of elements in the matrix study was 17×17×2×12 in 12 subjects. 175 screws in total of 6 936 units could safely meet the operative standard. No significant difference in the number of pedicle screw between left and right sides (P>0.05). Results indicated that the digital three-dimensional modeling technology is an effective, simple, accurate way in the preoperative design and measurement for atlas pedicle surgery.

To discover medical teaching method which is more funny and effective in early clinical contact education, Eye optical hospital affiliated to Wenzhou Medical University set up oph-thalmic microsurgery experience teaching course for junior medical students and set a variety of eye surgery simulation experience content, such as conjunctival suture surgery, corneal suture surgery, cataract surgery, eye surgery simulation and so on, which can effectively arouse students' professional interest in learning and promote students' thinking and exploration to their profession.

ObjectiveTo investigate the relationship between intervertebral disc pressure and clinical efficacy after the minimally invasive treatment of cervical disc herniation. MethodsForty-seven patients with cervical disc herniation treated by disc radiofrequency ablation, and monitored the intervertebral disc pressure after that. Moreover, the correlation between the pressure and the clinical efficacy was observed. ResultsAll cases were successfully completed under pressure monitoring. Forty-seven cases underwent a follow-up of 1-25 months,according to JOA score,using postoperative improvement rate (Hirabashi formula) to assess the clinical efficacy. High efficacy in 25 cases,fine efficacy in 19 cases,good efficacy in 3 cases,high and fine efficacy rate was 93.6％ (44/47). The postoperative intervertebral discpressure was significantly correlated with improvement rate after cervical minimally invasive surgery (P ＜0.05). ConclusionsRadiofrequency ablation treatment of cervical disc herniation is safe and effective minimally invasive technique. If the pressure in the postoperative intervertebral disc is 3 kPa,it will get better prognosis.

Objective To observe the PML protein expression of hepatocellar carcinoma tissue and cells lines and As 2 O3 regulate its expression .Methods Immunohistochemistry was used to examine the PML protein expression of hepatocellar carcinoma tissue . Western blot analysis were used to observe PML protein expression of hepatocellar carcinoma tissue of 12 cases ,5 hepatocellar car-cinoma cell lines ,such as HuH7 ,HepG2 ,Hep3B ,SMMC-7721 ,MHC97H .Western blot analysis was used to detected the PML pro-tein expression of these hepatocellar carcinoma cell lines after 72-96 h treated with 0 .25 μg/mL of As2 O3 .Results Immunohisch-enmical staining showed that the PML protein was expressed in both cytoplasm and nucleus ,did not well-distributed in hepatocellar carcinoma cells .There was no significant differences of PML protein expressed among differently differentiated stages of hepatocel-lar carcinoma cells .Western blot analysis found that hepatocellar carcinoma tissues of 12 cases with hepatocellar carcinoma ex-pressed PML protein ,and there was significant difference of PML protein expressed among 12 cases suffer with hepatocellar carci-noma .hepatocellar carcinoma cell lines ,such as HuH7 ,HepG2 ,Hep3B ,SMMC-7721 and MHC97H all expressed PML protein ,and there was little difference of PML protein expressed among hepatocellar carcinoma cell lines .The PML protein expression of HuH7 ,HepG2 ,Hep3B ,SMMC-7721 and MHC97H cell after 72-96 h treated with 0 .25 μg/mL of As2O3 significant decreased . Conclusion Hepatocellar carcinoma tissue and cells may express PML protein ,and As2 O3 may regulate this protein expression as well .PML protein may be the target molecule of As2 O3 treating HCC .

OBJECTIVE To prove the diagnosis value for Legionnaires pneumophial pneumonia using polymerase chain reaction. METHODS L. pneumophial-DNA (LPN-DNA) from 47 spuum and 6 bronchoalveolar lavage fluid samples collected from 53 patients with atypical pneumonia was detected by PCR. RESULTS The positive rate of LPN-DNA in 53 patients with atypical pneumonia was 9.4%, while the positive rate of sputum and bronchoalveolar lavage fluid samples was 6.4%and 33.3%, respectively. CONCLUSIONS LPN-DNA detected by PCR for early diagnosis of atypical pneumonia has favorable clinical application.

A novel unsaturated polyphosphoester (UPPE) was devised in our previous research, which is a kind of promising scaffold for improving bone regeneration. However, the polymerization process of UPPE scaffolds was unfavorable, which may adversely affect the bioactivity of osteoinductive molecules added if necessary, such as recombinant human bone morphogenetic protein-2 (rhBMP2). The purpose of this study was to build a kind of optimal scaffold named UPPE-PLGA-rhBMP2 (UPB) and to investigate the bioactivity of rhBMP2 in this scaffold. Furthermore, the cytotoxicity and biocompatibility of UPB scaffold was assessed in vitro. A W1/O/W2 method was used to fabricate PLGA-rhBMP2 microspheres, and then the microspheres were added to UPPE for synthesizing UPB scaffold. The morphological characters of PLGA-rhBMP2 microspheres and UPB scaffolds were observed under the scanning electron microscopy and laser scanning confocal microscopy. The cumulative release of UPB scaffolds was detected by using ELISA. The cytotoxicity and biocompatibility of UPB scaffolds were evaluated through examining the adsorption and apoptosis of bone marrow stromal cells (bMSCs) seeded on the surface of UPB scaffolds. The bioactivity of rhBMP2 in UPB scaffolds was assessed through measuring the alkaline phosphates (ALP) activity in bMSCs seeded. The results showed that UPB scaffolds sequentially exhibited burst and sustained release of rhBMP2. The cytotoxicity was greatly reduced when the scaffolds were immersed in buffer solution for 2 h. bMSCs attached and grew on the surface of soaked UPB scaffolds, exerting well biocompatibility. The ALP activity of bMSCs seeded was significantly enhanced, indicating that the bioactivity of rhBMP2 remained and still took effect after the unfavorable polymerization process of scaffolds. It was concluded that UPB scaffolds have low cytotoxicity, good biocompatibility and preserve bioactivity of rhBMP2. UPB scaffolds are promising in improving bone regeneration.

Objective:To explore whether the 15-minute retention rate (R15) of indocyanine green (ICG) in the indocyanine green excretion test and the effective hepatic blood flow (EHBF) can predict the occurrence of mild hepatic encephalopathy (MHE).Methods:Using the convenience sampling method, we collected clinic data from 153 patients diagnosed with liver cirrhosis or liver failure from June 2019 to December 2019 in the Third Affiliated Hospital of Sun Yet-sen University in Guangzhou. We screened the MHE patients with the number connect test-A and the digital symbol test, and analyzed the clinical data. By taking different values for R15 and EHBF as cut-off points, the significance of the two factors in predicting MHE is explored respectively.Results:The incidence of MHE was 38.56% (59/153). Single factor analysis showed that the difference of Child-Pugh grade between the MHE group and the non-MHE group was statistically significant ( χ2 value was 7.606, P<0.05), while the differences between cirrhosis and liver failure diagnosis, fasting blood glucose, and serum creatinine were not statistically significant ( P>0.05). When most points between 0.11 and 0.61 were selected as normal and abnormal cut-off points of R15, R15 had statistical significance ( P<0.05) and when R15 selected 0.18, it was most significant (Fisher exact test P=0.00024). When most points between 0.08 and 0.76 were selected as normal abnormal cut-off points of EHBF, EHBF had statistical significance ( P<0.05) and when EHBF selected 0.25, it was most significant (Fisher exact test P=0.00022). Through Logistic stepwise regression analysis, the risk factors for MHE were R15 and EHBF. The ROC curve was used to illustrate the predictive effects of two factors on MHE. Conclusions:The incidence of MHE in patients with cirrhosis or liver failure is high. When R15≥0.18 or EHBF≤0.25 L/min, R15 and EHBF in indocyanine green excretion test can better predict the occurrence of MHE than Child-Pugh classification, and can be help to evaluate and manage patients in time.