Objectives To study the effect of cooling blood and invigorating circulation method on prevention and treatment of pulmonary fibrosis,and explore its mechanism.Methods Male ICR mice were randomly divided into 4 groups:negative control group,pulmonary fibrosis model group,cooling blood and invigorating circulation group and prednisone positive control group.The pulmonary fibrosis model of mice were established by BLM nasal instillation.After 8 hours,the mice were given prescription of cooling blood and invigorating circulation(Xijiao Dihuang decoction) by gastric perfusion.At the 28th day after treatment,the indexes were detected.The TGF-?1 content of bronchoalveolar lavage fluid(BALF) was tested by enzyme linked immunosorbent assay,and hydroxyproline(HYP) was examined by alkaline hydrolysis.Results The degree of airsacculitis and fibrosis in model group are obviously higher than the negative control group by pathological observation.Compared with model group,HYP content was decreased obviously in herb group(P

Objective To summarize the experience of early management in elderly patients with serious burning in order to raise cure rate. Methods Elderly patients (63 cases) with serious burning (burned area exceeding 30% or Ⅲ? area exceeding 10% ) admitted from 1990 to 2002 were retrospectively studied. Patients were divided into two groups according to the admission date, before and after January 1, 1996 since new management was extensively applied after 1996. These measures consisted of rapid and adequate fluid resuscitation, early enteral feeding and autograft after eschar excision. Results The incidence of sepsis and MODS was 38.7% and 19.4% respectively after 1996. It was evidently lower than the group before 1996(65.6% vs 43.8%, P

Objective To analyze catheter-related bloodstream infections due to Rhizobium radiation (R.radiobacter) in pediatric patients.Methods Clinical data of 1 014 pediatric patients with intravascular catheterization were collected from February 2012 to February 2014,including age,length of time a catheter remained in place,laboratory findings and outcome of R.radiobacter bloodstream infection in order to explore the factors for R.radiobacter infection.Results There were 26 children contracting R.radiobacter bloodstream infection children,and of them,21 were under 2 years old (80.77％),and the length of time for catheter dwelt in vessel longer than 5 days in 20 children (76.92％).There were significant differences in age under 2 years old,length of time longer than 5 days for catheter remained in place,CD4 and CD4/ CD8 between 26 children with R.radiobacter infection and uninfected children (P ＜ 0.01).The re-infection with different varieties of bacterial strains was found in 12 of all R.radiobacter infection children (46.15％) after treatment,and of them,R.radiobacter bloodstream infection was detected twice in 2 children,and 2 died (7.69％).Conclusions Age under 2 years old,the length of time for intra-vascular catheter remained in place longer than 5 days,and weakened immunity are the important risk factors of R.radiobacter bloodstream infection,and the improper medical care may be the cause of re-infections in pediatric patients with prolonged intra-vascular catheter-dwelling.

Objective To assess clinical curative effect of three types of combined posterior atlantoaxial internal fixation techniques in treatment of atlantoaxial instability. Methods The study involved 68 patients with atlantoaxial instability treated with different fixation techniques from August 2002 to March 2008. ( 1 ) Transpedicular fixation was performed in 32 patients including 20 patients with Anderson Ⅱ odontoid fractures (seven with old odontoid fracture and 13 with fresh fractures), six with type Anderson Ⅲ fresh odontoid fractures, four with disrupt of transverse ligament of the atlas and two with congenital loose odontoid process combined with atlantoaxial instability. (2) Transpedicular internal fixation with screws of atlas incorporating C2 laminar screws was performed in 20 patients with upper cervical injury including eight with type Ⅱ odontoid process fractures combined with atlantoaxial backward dislocation,four with type Ⅱ odontoid process fractures combined with atlantoaxial forward dislocation, two with nonunion of odontoid process fractures, three with type Ⅲ odontoid process fractures combined with atlantoaxial unsteadiness and three with atlantoaxial dislocation combined with disrupt of transverse ligament of atlas. (3)A total of 16 patients with traumatic atlantoaxial instability, reducible atlantoaxial dislocation and irreducible atlantoaxial dislocation were treated with four-point internal fixation technique using autologous iliac bone grafts. Results (1) A total of 120 screws were implanted in 32 patients, with no spinal cord or vertebral artery injury after surgery. Atlas lateral mass fixation was adopted in three patients because of broken posterior arch of the atlas. Postoperative CT showed that two screws were inserted into the vertebral artery hole and that one screw was inserted medially into the spinal canal and caused medial correx rupture, but both with no clinical symptoms. All 32 patients were followed up for 6-42 months ( average 26 months), which showed solid fusion in all patients. The postoperative JOA scores ranged from 13.2 points to 16.8 points (average 14. 8 points). (2) Thirty-two screws were implanted in 20 patients,with no spinal cord or vertebral artery injury. The patients were followed up for mean six months ( range 6-14 months). Postoperative X-ray showed sound bone fusion, with no cervical instability, loosening or breakage of the screws. (3) The symptoms of all the patients were improved at different degrees, with no neurological deterioration or severe complications, such as nerve blood vessel injury. All 16 patients were followed up for 8-26 months ( average 16 months), which showed bony fusion in all patients at 3-6 months after surgery. The spinal cord function was improved markedly in five patients, good in eight, mild in two but unchanged in one. Conclusions Three types of combined posterior atlantoaxial internal fixation techniques have advantages of rigid, short-segmental and three-dimensional fixation and hence are effective methods for treatment of upper cervical injuries. The combination mode can be varied according to specific condition of the patients.

Objective To evaluate the efficacy and safety of dorsal root entry zone (DREZ) incision for pain induced by brachial plexus injury. Methods A cohort study was performed in 41 consecutive patients with pain induced by brachial plexus injury treated with DREZ incision from July 2005 to December 2007. Of all, 19 patients were amputated and had phantom limb sensation. Oral pain relief (0%-100%) and complications were followed up by one professional doctor. Oral pain relief rate ≥50% was considered satisfactory outcome. Results The proportion of patients with satisfactory pain relief was 90% (37/41), 81% (30/37), 77% (24/31) and 70% (16/23) at 2 weeks, 3 months, 6 months and last follow-up (over one year) after surgery. At last follow-up, 15 out of 16 patients with over 10 years of pain duration got satisfactory pain relief; while only 16 out of 25 patients with less than 10 years of pain duration got satisfactory pain relief (x2 =4.682, P =0.030). In 16 amputees who were followed up for more than three months, seven patients with alteration of phantom limb sensation got satisfactory pain relief, while only four out of nine patients without alteration of phantom limb sensation got satisfactory pain relief. Among 37 patients followed up for more than three months, severe neurological defects were found in three patients including one with mild motor disturbance in the ipsilateral lower limb and two with severe sensory disturbance in the ipsilateral lower limb. Conclusions DREZ incisions are effective and safe neurosurgical procedure for relieving pain induced by brachial plexus injury. The possible predictive factors of better outcome are the long preoperative pain duration and postoperative phantom limb sensation among amputees.

Plant polyphenols are a group of naturally occurring phytochemicals which are present in high amounts in plants and are the most abundant dietary antioxidants. Epidemiological and animal model researches have indicated that polyphenols can improve cognitive function. The mechanism for polyphenols to improve cognitive function has been extensively studied and may be owing to antioxidant, anti-imflammatory, neuroprotective, cerebrovascular blood flow increasing activities, and etc. Nowadays, the plant polyphenols and its benefits to cognitive function have become a hot research topic. In this article, we reviewed the latest progress from the structure and origin of phenolic compound, as well as its effect and action mechanism on cognitive function.

Objective To investigate the stress characteristics of atlanto-axial bony structure under conditions of anteflexion,posterior extension,lateral flexion,and rotation after artificial atlanto-odontoid joint arthroplasty using three-dimensional finite element method and to improve the orientation of artificial atlantoodontoid joint from perspective of stress.Methods A three-dimensional finite element model of prosthetic atlanto-odontoid joint arthroplasty was created from CT images of the artificial atlantoodontoid joint and cervical vertebrae using software Mimics,Freeform,and Ansys.Stress characteristics of the model dealt with proneness,posterior extension,lateral flexion,or rotation loads were observed.Biomechanical performance of the bony structure of the model was analyzed and the orientation in improving the prosthesis was discussed.Results Anteflexion loading produced a maximum stress of 0.138 ×l08 N/m2 at the junction of lateral mass and posterior arch of the atlas,and 0.201 × 108 N/m2 at axial nail hole,contact point of plates with the axis,and posterior arch of the axis.Posterior extension loading produced a maximum stress of 0.666 × 107 N/m2 at junction of lateral mass and posterior arch of the atlas and 0.254 × 108 N/m2 at arch of the axis.Besides,stress concentration occurred at atlantoaxis nail hole.Right bending produced a maximum stress of 0.124 × 108 N/m2 at nail hole of right mass of atlas and 0.178 × 108 N/m2 at right contact point of the axis with plates.Right rotation produced a maximum stress of 0.847 × 107 N/m2 at junction of lateral mass and posterior arch of the atlas and 0.170 × 109 N/m2 at contact point of the axis with plates.The finite element model comprised 28 620 nodes and 107 441 units and provided good defining of the structural properties of artificial atlanto-odontoid joint arthroplasty.Under different loading conditions,the stress was mainly distributed in contact point of the vertebral body with plates,nail holes,junction of lateral mass and posterior arch of the atlas,and axial pedicle.Conclusions Prosthetic atlanto-odontoid joint scatters a part of the stress and alters the stress distribution of the atlas and axis from the intact condition.Finite element method can obtain complete analysis of the stress distribution of the artificial atlanto-odontoid joint arthroplasty.

Objective To evaluate the clinical effect and safety of the occiput-cervicle or C1-C2 internal fixation and bone graft fusion in treatment of the unstable atlas fracture.Methods A retrospective study was performed in 38 patients with unstable atlas fractures treated by the occiput-cervicle or C1-C2 internal fixation and bone graft fusion from October 2004 to March 2009.Six patients with comminuted atlas fracture combined with instability of the occipito-atlantoid articulations were treated with occiput-C2 fusion(five patients)and with occiput-C3 fusion(one patient).There were seven patients with typical Jefferson fractures,three with semiring fractures,eight with atlas fractures combined with Anderson type Ⅱ odontoid process fractures,three with atlas fractures combined with Hangman's fractures (two patients with Levine and Edwards type Ⅲ Hangman's fractures were treated with occiput-C3 fusion and one patient Levine and Edwards type Ⅱ Hangman's fracture was treated with C1-C2 fusion),three with atlas fracture combined with lower cervicle injury,six with rupture of transverse ligament combined with instability of atlanto-axial joint(Dickman transverse ligament type Ⅰ injury)and two with comminuted fracture of the lateral mass associated with bony avulsion of the medial tubercle and transverse ligament(Dickman transverse ligament type Ⅱ injury).Of all,five patients were treated with occiput-C2 fusion,three treated with occiput-C3 fusion and 30 treated with C1-C2 fusion.Results All the patients were followed up for a range of 12-46 months(average 28 months),which showed improvement of clinical symptoms in some extent postoperatively.The operation time ranged from 80 to 190 min ates(average 135 minates),with intraoperative blood loss for 200-3 300 ml(average 460 ml)and average fluoroscopic time for 60 seconds.There were no neurological deficits,vertebral artery related complications or other complications in all the patients during the surgical operation.No neurological deficit was aggravated after the patient's mobilization with brace three days after operation.The enous plexus of blood vessel at C1-C2 rupture induced by the use of electrocautery was found in three patients who showed no cerebral hemodynamic deficit after hemostasis with hemostatic sponge and cotton piece.The follow-up X-ray and CT manifested osseous fusion in all the patients,with no looseness or breakage of the screws.The late follow-up showed pain associated with movement and limited range of motion in four patients(11%)and occipital neuralgia in one.Conclusions An occiput-cervicle fixation fusion or a C1-C2 fixation fusion combined with short external fixation can reestablish the upper cervical stability and prevent further injury of the spinal cord and nerve function and hence is an ideal option for C1 burst fracture with or without rupture of the transverse ligament.

@@

Objective To investigate feasibility and safety of anterior pedicle screw fixation tunnel in the axis so as to provide theoretic evidence for further clinical application.Methods Thirty-two dry axis specimens were used for anterior pedicle screw placement,and the length of pedicle crews tunnel was measured by a digital caliper.The extraversion angle and the downslope angle were determined by CT cross-sectional scanning and reconstruction.Results All the anterior pedicle screws were positioned well,with no perforation of the pedicle.The anchoring point was at the vertex between the vertebral body and the superior articular process,with axis pedicle length of(28.4 ± 2.5)mm,the extraversion angle of (28.5 ±2.3)°and the downslope angle of(15.5 ±2.0)°.Conclusions Anterior pedicle screw fixation tunnel is feasible in the axis and can keep away from some important anatomy structures including transverse foramen,vertebral artery groove and vertebral canal to provide large safety space.