Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Lung transplantation is the ultimate therapeutic option for end-stage pulmonary diseases such as interstitial pneumonia, chronic obstructive pulmonary disease and pneumoconiosis. Currently, the shortage of allogeneic lung donors significantly limits the opportunity for end-stage lung disease patients to receive lung transplantation. In recent years, with the rapid development of biomedical engineering technologies, especially the major breakthroughs in genetic modification and cloning, xenogeneic lung transplantation has shown important potential for clinical translation. Among them, genetically modified pigs have become the most promising xenogeneic lung source due to the close similarity of organ size and physiological characteristics to humans, and the ability to perform targeted gene knockouts (such as α-Gal antigen knockout) to reduce the occurrence of hyperacute rejection. This article focuses on the research progress of porcine xenogeneic lung transplantation, systematically reviews the latest achievements and challenges in animal experiments and human trials, and introduces the technical experience accumulated by Shenzhen Third People's Hospital in the porcine-to-monkey xenogeneic lung transplantation model, in the hope of providing practical references for future research in this field.

BACKGROUND: Temozolomide (TMZ) resistance is a significant challenge in treating glioblastoma (GBM). Collagen remodeling has been shown to be a critical factor for therapy resistance in other cancers. This study aimed to investigate the mechanism of TMZ chemoresistance by GBM cells reprogramming collagens. METHODS: Key extracellular matrix components, including collagens, were examined in paired primary and recurrent GBM samples as well as in TMZ-treated spontaneous and grafted GBM murine models. Human GBM cell lines (U251, TS667) and mouse primary GBM cells were used for in vitro studies. RNA-sequencing analysis, chromatin immunoprecipitation, immunoprecipitation-mass spectrometry, and co-immunoprecipitation assays were conducted to explore the mechanisms involved in collagen accumulation. A series of in vitro and in vivo experiments were designed to assess the role of the collagen regulators prolyl 4-hydroxylase subunit alpha 1 (P4HA1) and yes-associated protein (YAP) in sensitizing GBM cells to TMZ. RESULTS: This study revealed that TMZ exposure significantly elevated collagen type I (COL I) expression in both GBM patients and murine models. Collagen accumulation sustained GBM cell survival under TMZ-induced stress, contributing to enhanced TMZ resistance. Mechanistically, P4HA1 directly binded to and hydroxylated YAP, preventing ubiquitination-mediated YAP degradation. Stabilized YAP robustly drove collagen type I alpha 1 ( COL1A1) transcription, leading to increased collagen deposition. Disruption of the P4HA1-YAP axis effectively reduced COL I deposition, sensitized GBM cells to TMZ, and significantly improved mouse survival. CONCLUSION P4HA1 maintained YAP-mediated COL1A1 transcription, leading to collagen accumulation and promoting chemoresistance in GBM.
Temozolomide ; Humans ; Glioblastoma/drug therapy* ; Animals ; Mice ; Cell Line, Tumor ; Drug Resistance, Neoplasm/genetics* ; YAP-Signaling Proteins ; Hydroxylation ; Dacarbazine/pharmacology* ; Adaptor Proteins, Signal Transducing/metabolism* ; Transcription Factors/metabolism* ; Collagen/biosynthesis* ; Collagen Type I/metabolism* ; Prolyl Hydroxylases/metabolism* ; Antineoplastic Agents, Alkylating/therapeutic use*

Asarum forbesii is a perennial herb born in a shaded and humid environment, which is warm in nature. With the efficacy of warming lung, resolving fluid retention, and relieving coughs, it can be used to treat the syndrome of cold fluid accumulating in lung. To investigate the effects of different shading conditions on the composition and efficacy of A. forbesii, this study planted A. forbesii under 20% natural light(NL20), 40% natural light(NL40), 60% natural light(NL60), and 80% natural light(NL80) and utilized ultra performance liquid chromatography(UPLC) and micro broth 2-fold dilution method to detect the volatile chemical compounds and the minimum inhibitory concentration. At the same time, the study investigated the effects of A. forbesii grown under different shading conditions on the signs, pathological changes of lung tissues, serum cytokine levels, activities of mitochondrial respiratory chain complexes Ⅰ-Ⅴ in lung tissues, and relative expression of related genes of mice with syndrome of cold fluid accumulating in lung. The results indicated that with the increase of shading, the content of kakuol, methyl eugenol, and asarinin in A. forbesii and the antibacterial effect showed a tendency of increasing first and then decreasing, and the NL40 group was significantly better than the other groups. Under the conditions of NL20 and NL40, A. forbesii significantly alleviated the pathological damage to lung tissues, restored the homeostasis of the lung, and enhanced the energy metabolism level of mice with syndrome of cold fluid accumulating in lung. In addition, A. forbesii planted under the two conditions reduced the content of interleukin-8(IL-8), interleukin-13(IL-13), tumor necrosis factor-α(TNF-α), and mucin 5AC(MUC5AC), increased the levels of interleukin-10(IL-10) and aquaporin 1(AQP1), lowered the expression of MMP9, VEGF, TGF-β, and MAPK3. In conclusion, the therapeutic effect of A. forbesii on the syndrome of cold fluid accumulating in lung was positively correlated with the degree of shading, and the chemical composition and efficacy of warming lung and resolving fluid retention were optimal under the conditions of NL20-NL40. This study can provide reference for the pharmacological research and cultivation of A. forbesii.
Animals ; Mice ; Lung/pathology* ; Drugs, Chinese Herbal/administration & dosage* ; Male ; Light ; Cytokines/genetics* ; Humans

Evidence mapping was used to systematically analyze the clinical research evidence of oral Chinese patent medicines in the treatment of intracerebral hemorrhage(ICH), thus revealing the distribution and quality of evidence in this field. The relevant articles were retrieved from CNKI, Wanfang, VIP, SinoMed, PubMed, EMbase, Cochrane Library, and Web of Science from inception to July 5, 2024. The distribution characteristics of evidence were presented numerically and graphically. A total of 35 Chinese patent medicines were identified, involving 261 articles. The basic information of the 35 Chinese patent medicines, publication trend, traditional Chinese medicine(TCM) syndromes, interventions, and outcome indicators were compared and analyzed, and the methodological quality of the articles was evaluated. The results indicated that the clinical scope of Chinese patent medicines in the treatment of ICH was broad. However, the available studies inadequately emphasized the advantages and characteristics of TCM, lacked the safety information and the standards for evaluating outcome indicators, and paid insufficient attention to cognitive ability and neuropsychology. In addition, these articles demonstrated low quality. It is recommended that follow-up clinical research should be standardized and highlight the characteristics of TCM. In the analysis of outcome indicators, TCM syndrome evaluation should be taken as an important outcome indicator, and the evaluation criteria should be unified. Moreover, more attention should be paid to patients' cognitive ability and neuropsychology. The holder of marketing license of Chinese patent medicines should standardize the clinical position and improve the safety information in the medicine instructions according to the relevant requirements of the National Medical Products Administration. Additionally, the proportion of Chinese patent medicines in the category A list of medical insurance should be increased, and the limited medical resources should be rationally allocated.
Cerebral Hemorrhage/drug therapy* ; Humans ; Drugs, Chinese Herbal/therapeutic use* ; Medicine, Chinese Traditional ; Nonprescription Drugs/administration & dosage* ; Administration, Oral

In recent years, the reform of the registration, evaluation, and approval system for traditional Chinese medicine(TCM) has been promoted at the national level, with establishment of an evaluation evidence system for TCM registration that combines TCM theory, human use experience, and clinical trials(known as the "three-combined" evaluation evidence system). This system, which aligns with the characteristics of TCM clinical practice and the laws of TCM research and development, recognizes the unique value of human use experience in medicine and returns to the essence of medicine as an applied science, thus receiving widespread recognition from both academia and industry. However, it meanwhile poses new and higher challenges. This article delves into the value and challenges faced by the "three-combined" evaluation evidence system from three perspectives: registration management, medical institutions, and the TCM industry. Furthermore, it discusses how the China Association of Chinese Medicine, leveraging its academic platform advantages and leading roles, has made exploratory and practical efforts to facilitate the research and development of new TCM drugs and the implementation of the "three-combined" evaluation evidence system.
Drugs, Chinese Herbal/standards* ; Humans ; Medicine, Chinese Traditional/standards* ; China ; Drug Development

OBJECTIVE: To explore clinical efficacy of autologous platelet-rich plasma(PRP) in treating Rockwood type Ⅲ acromioclavicular dislocation. METHODS: From January 2019 to July 2021, 32 patients with Rockwood type Ⅲ acromioclavicular dislocation were treated with minimally invasive adjustable titanium plate internal fixation, and were divided into PRP group and control group according to whether PRP treatment was performed, with 16 patients in each group. In PRP group, there were 10 males and 6 females, aged from 28 to 47 years old with an average of (36.75±7.14) years old;the time from injury to surgery ranged from 1 to 31 h with an average of (26.13±3.98) h;5 patients on the left side and 11 patients on the right side;PRP was injected once during operation and the 4th and 8th weeks after operation respectively. In control group, there were 8 males and 8 females, aged from 30 to 52 years old with an average of (38.50±5.48) years old; the time from injury to surgery ranged from 1 to 29 h with an average of (25.48±3.11) h;7 patients on the left side and 9 patients on the right side; minimally invasive surgical treatment was performed. Visual analogue scale(VAS) was used to evaluate pain and Constant-Murley score for shoulder joint function was used to evaluate the recovery of shoulder joint movement function before operation and 1, 3, 6, and 12 months after operation respectively. RESULTS: All patients were followed up for 12 to 28 months with an average of (18.3±5.2) months. All incisions patients healed well without adverse events such as infection. Postoperative VAS of PRP group at 1, 3, and 6 months were (5.5±1.2), (3.7±1.6), and (2.4±1.2), respectively, while were lower than those of control group (6.6±1.4), (4.9±1.1), and (3.7±1.3), respectively;and had statistical differences between two groups (P<0.05). There was no statistically significant difference in VAS between two groups before operation and 12 months after operation (P>0.05). Postoperative Constant-Murley scores of PRP group at 1, 3, and 6 months were (64.09±11.61), (73.19±12.89), and (82.61±14.81) points, respectively, which were higher than those of control group were (52.32±17.42), (61.65±14.43), and (72.52±11.04) respectively;and the differences were statistically significant (P<0.05). There was no statistically significant difference in Constant-Murley scores at 12 months after operation between two groups (P>0.05). In PRP group, there was no statistically significant difference at 6 months and 12 months after operation (P>0.05), while there were statistically significant differences at the other time points (1 month after operation compared with before operation, 3 months after operation compared with 6 months after operation, and 3 months after operation compared with 1 month after operation) (P<0.05). In control group, there was no statistically significant difference when comparing 1 month and 3 months after operation (P>0.05), while at the other time points (1 month after operation with before operation, 3 months after operation with 6 months after operation, and 6 months after operation with 12 months after operation), the differences were all statistically significant (P<0.05). CONCLUSION Adjustable titanium plate fixation combined with postoperative injection of PRP for the treatment of Rockwood type III acromioclavicular joint dislocation has effect of promoting the recovery of shoulder joint function and reducing pain.
Humans ; Male ; Female ; Adult ; Middle Aged ; Platelet-Rich Plasma ; Acromioclavicular Joint/surgery* ; Bone Plates ; Titanium ; Joint Dislocations/therapy* ; Fracture Fixation, Internal/methods*

OBJECTIVE: To explore clinical efficacy of membrane-induced technique combined with gastrocnemius muscle flap transposition in treating traumatic osteomyelitis of the upper tibia. METHODS: A retrospective analysis was conducted on 7 patients with traumatic osteomyelitis of the upper tibia who were treated with membrane-induced technique combined with gastrocnemius muscle flap transposition from January 2022 to December 2023. Among them, there were 4 males and 3 females; aged from 29 to 57 years old; 4 patients were treated after open fracture, 2 patients were treated after closed fracture, and 1 patient was treated after scalding; the courses of disease ranges from 2 weeks to 8 years; sinus tracts were present in all patients, and the lesion range of the tibia ranged from 5 to 9 cm. The results of deep tissue bacterial culture showed that 2 patients were negative, 3 patients were staphylococcus aureus, 1 patient was methicillin-resistant staphylococcus aureus, and 1 patient was pseudomonas aeruginosa and 1 patient was klebsiella pneumoniae. After debridement, the range of bone defect ranged from 8 to 12 cm, and the cortical defect accounted for approximately 30% of the circumference. The area of soft tissue defect ranged from 8.0 cm×2.0 cm to 10.0 cm×6.0 cm. At the first stage, vancomycin-loaded/meropenem/gentamicin-loaded bone cement was implanted. The gastrocnemius muscle flap was repositioned to cover the wound surface and free skin grafting was performed. After an interval of 7 to 10 weeks, the stageⅡsurgery was performed to remove bone cement. Autologous iliac bone mixed with vancomycin/gentamicin and calcium sulfate artificial bone was transplanted, and the wound was sutured. One patient retained the original internal plants, one patient removed the internal plants and replaced them with steel plate external fixation, one patient replaced the internal plants and added steel plate external fixation, and three patients were simply fixed with steel plate external fixation. One year after operation, the recovery of knee joint and ankle joint functions was evaluated by using Hospital for Special Surgery (HSS) knee joint score and Kofoed ankle joint function score respectively. RESULTS: All patients had their wounds closed simultaneously with bone cement implantation and healed well. All patients were followed up for 12 to 17 months after operation, and satisfactory bone healing was achieved at 6 months after stageⅡsurgery. Twelve months after operation, all patients had good bone healing without obvious limping was observed when walking. At 12 months after operation HSS knee joint score ranged from 93 to 100 points, and Kofoed ankle function score ranged from 96 to 100 points. CONCLUSION For traumatic osteomyelitis of the upper tibia, a staged treatment plan combining membrane-induced technique and gastrocnemius flap transposition on the basis of thorough debridement could safely cover the wound surface, effectively control bone infection and achieve satisfactory bone healing, without adverse effects on limb function.
Humans ; Male ; Female ; Middle Aged ; Osteomyelitis/surgery* ; Adult ; Surgical Flaps ; Retrospective Studies ; Tibia/injuries* ; Muscle, Skeletal/surgery*