SARS-CoV-2 may have potential effects on the male reproductive system. Evidence has shown that SARS-CoV-2 is not likely to transmit through sexual intercouse. However, male infected with SARS-CoV-2 may experience sexual dysfunction, semen quality decline, testicular damage and abnormal sex hormones. The extent and duration of these damages are still unclear, and further multidimensional research is necessary.

Objective: By analyzing the examination results of physical examination of workers exposed to DMF among 32 factories in some areas of a province, to investigate the working years of dimethylformamide (DMF) poisoning and the impact on the health status of exposed workers, and to explore the targeted intervention strategies. Methods: From February to May 2018, 2, 457 workers exposed to DMF in some areas of Jiangsu Province were selected as survey targets. Cross-sectional survey was conducted to investigate the health status of workers exposed to health, And the health surveillance data, detection data of occupational disease risk factors in the workplace were collected and analyzed, respectively. Results: The positive rate of abnormal liver function and B-ultrasound of males exposed to DMF was significantly higher than that of females. The abnormal rates of liver function, blood pressure and B-ultrasound in workers aged between 60 and 69 were higher in contrast to those in any other age groups. And the differences was statistically significant. In particular, the highest rate of abnormal blood pressure was found in workers exposed 21-30 years (39.2%) , the highest rate of abnormal liver function was found in workers exposed 11-20 years (44.3%) , and the highest rate of abnormal B-ultrasound was found in workers exposed 0-10 years (60.4%) . Conclusion Long-term exposure to dimethylformamide can affect workers’ liver function and blood pressure. Specifically, with the increase of contact age, the degree of chronic damage to liver, cardiovascular and other organs also increases.

Objective To evaluate the incidence of and risk factors for syphilis seroconversion amomg drug addicts during methadone maintenance treatment (MMT).Methods A retrospective study was performed on drug addicts receiving MMT at MMT clinics in Maanshan,who were seronegative for syphilis before the treatment and followed up by serological tests for syphilis for more than two years.The incidence of and risk factors for syphilis seroconversion during the two years of follow up were analyzed in all the subjects.Results A total of 161 drug addicts were included in this study,of whom,15 experienced seroconversion for syphilis with the average seroconversion rate being 4.66 per 100 person-years.The seroconversion tended to occurr in the early stage of MMT.Both Chi-square analysis and multivariate logistic regression analysis showed that syphilis seroconversion was independently associated with nonuse of condoms during the last sexual behavior before receiving MMT.Conclusions Interventions should be undertaken as early as possible to promote safe sexual behaviors among drug addicts at methadone clinics,and to promote condom use is especially important for blocking sexual transmission of diseases.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Objective To observe the progression of intestinal fibrosis in chronic radiation intestinal injury(CRII)and study the protective mechanisms of autophagy agonist rapamycin on intestinal fibrosis in CRII.Methods Thirty C57/B6male mice were randomly divided into the control group(CO group),the radiation group(SR group)and the rapamycin intervention group(RI group).The CO group was not treated.In SR group,the CRII model(single dose of9Gy radiation)was established first,and the samples were taken after 3months.In RI group,the rats were treated with rapamycin(2mg/kg,intraperitoneal injection)for 1 week after modeling,other treat-ments were the same as that in SR group.Hematoxylin-eosin staining and Masson staining were used to evaluate the degree of intestinal mucosal injury and intestinal fibrosis.Enzyme-linked immunosorbent assay was used to detect the serum levels of interleukin-1 β(IL-1β)and interleukin-6(IL-6).The level of intestinal α-smooth muscle actin(α-SMA)was detected by immunohistochemistry.The levels of transforming growth factor-β1(TGF-β1),connective tissue growth factor(CTGF)and autophagy-related proteins(p62 and LC3)were detected by Western blot.Results Histopathological staining showed that compared with CO group,the intestinal muco-sal damage was aggravated(P＜0.05),and the degree of intestinal fibrosis was increased in SR group(P＜0.01).Compared with SR group,the intestinal mucosal damages were relieved(P＜0.05),and the intestinal fibrosis was greatly decreased in RI group(P＜0.01).Compared with the CO group,the levels of IL-1 β and IL-6 in the SR group were significantly increased(P＜0.01),while those in the RI group significantly decreased compared with the SR group(P＜0.01).The results of immunohistochemistry and Western blot showed that the expression levels of α-SMA,TGF-β1 and CTGF in the SR group were greatly higher than those in the CO group(P＜0.05),while significantly lower in the RI group than those in the SR group(P＜0.05).The expression of autophagy indexes in SR group were lower than that in the CO group(P＜0.05),and significantly higher in the RI group than that in the SR group(P＜0.05).Conclusion Rapamycin-induced autophagy could improve the process of intestinal fibrosis in CRII,and the mechanism may be related to the inhibition the differentiation and function of intestinal myofibroblasts and reduce the inflammation of intestine.

Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.