OBJECTIVES: To study the clinical effect of the L-shape technique combined with concentrated growth factor on the horizontal bone defects of maxillary anterior teeth. METHODS: Twenty-five implants from 25 patients who underwent single maxillary anterior tooth implantation with simultaneous bone grafting were selected as the study subjects. Based on the bone grafting techniques, the patients were divided into a test group (L-shaped technique with guided bone regeneration combined with concentrated growth factor, 11 cases) and a control group (traditional guided bone regeneration combined with concentrated growth factor, 14 cases). The early discomfort and wound healing conditions in the two groups at two weeks after surgery were compared. The horizontal bone thickness, vertical bone thickness, and grayscale values in the augmentation area were measured immediately postsurgery and six months after surgery. Implant stability, hard tissue resorption within six months, and grayscale values were compared between the two groups. RESULTS: Differences in early discomfort, wound healing, implant stability, and grayscale values between the two groups were not statistically significant (P>0.05). Vertical bone thickness in the test group was significantly better than that in the control group at six months after surgery (P<0.05). The variation in horizontal bone thickness in the test group was significantly higher than that in the control group (P<0.05). CONCLUSIONS The application of the L-shape technique with concentrated growth factor for horizontal bone defects in the anterior maxillary area yielded satisfactory short-term results in terms of bone augmentation, early discomfort, wound healing, and implant stability at six months after surgery.
Humans ; Maxilla/diagnostic imaging* ; Intercellular Signaling Peptides and Proteins/therapeutic use* ; Wound Healing ; Bone Transplantation/methods* ; Dental Implantation, Endosseous/methods* ; Bone Regeneration ; Male ; Female ; Adult ; Dental Implants, Single-Tooth ; Middle Aged

Objective To investigate the correlation between the attenuation of periappendiceal fat density and its relative CT value(rCT)with the severity of appendicitis,and whether rCT can evaluate the severity of acute appendicitis(AA).Methods A retro-spective selection was made of 79 patients who underwent whole-abdominal CT scans and were pathologically diagnosed with A A(45 with noncomplex A A,34 with complex AA)and 30 normal control group(NCG).Appendicitis-associated signs were recorded and the CT number of periappendiceal fat(CTa),CT number of mesenteric fat gap(CTm),CT number of abdominal anterior wall subcutaneous fat(CTaw),CT number of abdominal posterior wall subcutaneous fat(CTpw),CT number of retroperitoneal fat(CTrp),CT number of gluteal subcutaneous fat(CTgl),and CT number of psoasmajor muscle(CTps)were measured.The ratio of CTa to the CT values of the other 6 parts were calculated,defined as the rCT.Statistical analysis was performed using SPSS 20.0 soft-ware,and the differences were considered statistically significant at P＜0.05.Results Compared among the three groups,statistical differences were found between every two groups in CTa,rCTm,rCTaw,rCTpw,rCTrp,rCTgl,and rCTps(P＜0.05),and the rCT was the lowest in complex AA,followed by noncomplex A A.Receiver operating characteristic(ROC)curve analysis showed that rCTm,rCTaw,rCTpw,rCTrp,rCTgl,rCTps had diagnostic predictive value for both noncomplex AA and complex AA(P＜0.05).Conclusion The attenuation of periappendiceal fat density is associated with the severity of appendicitis,and rCT has certain diagnos-tic predictive value for assessing the severity of appendicitis.The diagnosis of noncomplex AA and complex AA is based on the 95％ confidence interval of rCT.

Objective:To analyze the mechanism of HOX transcript anti-sense RNA(HOTAIR)promoting invasion and metastasis of gastric cancer from the perspective of its structural domains.Methods:The clinical data of 60 patients with gastric cancer were collected at the Tianjin Medical University Cancer Institute&Hospital from December 2010 to December 2012.Mutants of HOTAIR 3'and 5'domains were constructed as HOT△P and HOT△L,respectively,and the invasion and metastasis of gastric cancer cells were detected using Transwell as-say.Western blot was used to detect epithelial-mesenchymal transition(EMT)-related protein expression;RNAseq was used to analyze the differential genes between the NC and the HOT△L group.RNA was extracted from the clinical tissues for analyzing the correlation between gene expression and clinical information.Results:HOT△L promoted the invasive and metastatic ability of gastric cancer cells more visibly than HOT△P.The mechanistic studies demonstrated that HOT△L more significantly promotes the EMT process in gastric cancer cells com-pared to HOT△P.HOT△L specifically up-regulated the expression of glycine amidinotransferase(GATM).Data analysis and clinical analysis suggested that the high expression of both HOTAIR and GATM group was associated with distal metastasis in gastric cancer patients(P=0.02),which further proved that the high expression of HOTAIR and GATM predicted the poor prognosis of gastric cancer.Molecular in-vestigations suggested that GATM could promote the invasion and metastasis of gastric cancer cells by advancing the progression of EMT.Regulation of EMT by GATM is the key mechanism by which HOT△L promotes the invasive and metastatic ability of gastric cancer,as de-termined by back-complementary experiments.Conclusions:HOTAIR 5'domain regulates the EMT process through specific up-regulation of GATM,thus,promoting the invasion and metastasis of gastric cancer.

Objective:To investigate the value of Sequential Organ Failure (SOFA) score and its dynamics (ΔSOFA) in predicting mortality in hematology care unit (HCU) .Methods:A retrospective clinical study was conducted on 79 critically ill hematologic patients admitted to the Center for Critical Care Medicine, Institute of Hematology & Blood Diseases Hospital, Chinese Academy of Medical Sciences, between May and June 2024. SOFA scores and ΔSOFA were calculated within 2 days before and after HCU admission. The predictive value of SOFA and ΔSOFA in mortality was assessed using receiver operating characteristic (ROC) curve analysis.Results:Among the 79 patients, the HCU mortality rate was 54.4%. The SOFA scores on days 1–3 (D1, D2, and D3) and ΔSOFA on day 1 (ΔD_1) of all patients, leukemia patients and hematopoietic stem cell transplantation (HSCT) patients were significantly higher in the death group compared with the non-death group (all P<0.05). ROC curve analysis revealed that the D_1, D_2, D_3 scores, and ΔD_1 significantly predicted mortality ( P<0.001), with areas under the curve (AUCs) of 0.786, 0.866, 0.901, and 0.843, respectively. The sensitivity values were 74.36%, 57.89%, 62.85%, and 86.84%, while specificity values were 70%, 100%, 100%, and 67.65%, respectively. In the HSCT group, the D_-1, D_1, D_2, D_ 3, scores and ΔD_1 were predictive of HCU mortality, with AUCs of 0.833, 0.794, 0.871, 0.846, and 0.795, respectively. Sensitivity values for these scores were 100%, 85.71%, 71.43%, 57.14%, and 57.14%, while specificity values were 73.33%, 70.59%, 91.33%, 100%, and 100%, respectively. In the leukemia group, the D_1, D_2, D_3 scores, and ΔD_1 were predictive of HCU mortality, with AUCs of 0.760, 0.829, 0.846, and 0.756, respectively. Sensitivity values were 71.43%, 78.57%, 53.85%, and 71.43%, while specificity values were 76.19%, 78.95%, 100%, and 63.16%, respectively. For all patients, the D_3 score exhibited the highest specificity, while the ΔD_1 demonstrated the highest sensitivity. For patients in both the HSCT and leukemia groups, the sensitivity and specificity values of the D_1 and D_3 scores exceeded those of the ΔD_1. Conclusion:For patients with hematologic critical illness, including leukemia and those undergoing HSCT hospitalized in the HCU, D_1, D_2, D_ 3 scores and ΔD_1 are significantly associated with HCU mortality.

BACKGROUND:Porous structures based on triple periodic minimal surfaces are one of the most promising orthopedic biostructures,among which the Gyroid structure is characterized by high specific surface area,high permeability,and zero mean curvature.OBJECTIVE:To screen the wall thickness interval of TC4 bionic bone scaffolds with 4 mm single-cell Gyroid structure matching the elastic modulus range of cancellous bone of the mandible through finite element analysis combined with mechanical compression test testing.METHODS:The finite element model of the 4 mm single-cell Gyroid structure with different wall thickths(0.1,0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was established.The equivalent elastic modulus of the Gyroid structure was analyzed,and the wall thickness interval of the Gyroid structure matching the elastic modulus range of the maxillary resinous bone was selected with different wall thicknesses of 0.2,0.3,0.4,0.5,0.6,and 0.7 mm,respectively.According to finite element analysis screening results,the material selected was Ti6Al4V.Selective laser melting was used to prepare 3D printed Gyroid structure specimens.The surface treatment was carried out by large-grained sand blasting and acid etching.The elastic modulus and compressive strength of the specimen were tested by mechanical compression experiment.RESULTS AND CONCLUSION:(1)The finite element analysis results showed that the equivalent elastic modulus of the Gyroid structure increased with the increase of wall thickness,and the equivalent elastic modulus of the Gyroid structure with wall thickness of 0.2-0.7 mm was within the range of the elastic modulus of the spongy bone of the mandible(1.5-4.0 GPa),which was used for 3D printing of the Gyroid structure specimen.(2)The mechanical compression test results showed that the elastic modulus and compressive strength of the Gyroid structural specimen increased with the increase of wall thickness,and the elastic modulus of the Gyroid structural specimen with wall thickness of 0.3-0.5 mm was within the range of the elastic modulus of the cancellous bone of the mandible.The compressive strength of the Gyroid specimen with 0.3-0.7 mm wall thickness was consistent with the mechanical properties of the mandible.(3)The results show that the Gyroid structure of 0.3-0.5 mm wall thickness is compatible with the range of elastic modulus of the mandible.

Objective To investigate the pathogenesis of high-altitude cerebral edema(HACE)and develop new therapeutic strategies.Methods Male Sprague-Dawley(SD)rats of 6 weeks old were selected and placed in a hypobaric chamber.The rats were exposed to the high-altitude environment of 7000 m above sea level for 3 days for HACE modeling.Whether the HACE model was successfully established in the rats was evaluated by measuring brain water content,the degree of disruption to the blood-brain barrier(BBB),and brain tissue Nissl staining.The experimental animals were divided into four groups,with 28 rats in each group.The blank control group was exposed to a normobaric and normoxic environment simulating the conditions at 500 m above sea level for 3 d.The other groups,including a model group(the HACE group),a bumetanide group(the positive control group),and a XH-6003 treatment group,were placed at an altitude of 7 000 m above sea level and were injected with normal saline,bumetanide,and XH-6003,a new type of Na-K-2C1 cotransporter 1(NKCC1)inhibitor,via the tail vein,respectively,twice daily for 3 d.The experimental animals were taken out of the hypobaric chamber for testing after 3 d.The primary outcome measures included brain water content,BBB permeability,changes in brain tissue morphology,and the expression levels of aquaporin-4(AQP4)and NKCC1.The secondary outcome measures included behavioral changes,apoptosis,and oxidative stress markers.Results The HACE rat model was successfully established.The model group exhibited increased brain water content(P＜0.0001),BBB disruption(P＜0.0001),impairment in learning skills and memory(P＜0.001),and anxiety/depression-like behaviors(P＜0.01).qPCR results showed significantly increased expression of NKCC1 and AQP4 in the brain tissue of the model group(P＜0.01).Pathology examination revealed neuronal and glial cell damage in the hippocampus of the model group(P＜0.01).Treatment with XH-6003,the NKCC1 inhibitor,reversed brain water content,BBB disruption,and neuronal and glial cell damage to a certain degree(P＜0.05),decreased the expression of NKCC1 and AQP4 in the brain tissue(P＜0.01),and inhibited apoptosis-related proteins.Among the oxidative stress indices,only glutathione(GSH)showed improvement(P＜0.001).Rats treated with XH-6003 showed functional improvement only in the time spent exploring novel objects,while other behavioral outcomes remained unchanged.Conclusion HACE is associated with the activation of the NKCC1/AQP4 pathway.Inhibition of this pathway alleviates brain edema,BBB disruption,and neuronal and glial cell damage.These findings suggest that XH-6003 holds potential as a therapeutic strategy for HACE at the cellular and molecular levels,but its effects in improving HACE-related behavioral disorders warrant further investigation.

An increasing number of studies have shown that there is a close relationship between Alzheimer's disease(AD)and diabetes mellitus(DM).Traditional Chinese medicine holds that"kidney yin deficiency"is the common pathogenesis of these two diseases,while modern medicine believes that their pathogenesis involves abnormal aggregation of amyloid proteins,insulin deficiency and resistance,inflammatory response,oxidative stress,and autophagy,among others.The well-known traditional Chinese medicine formula Liuwei Dihuang Pills plays a significant role in the treatment of these two diseases with the same therapeutic approach.Therefore,this article will explore the connection between Liuwei Dihuang Pills and the treatment of AD and DM from different aspects;analyze the common etiology and pathogenesis of AD and DM,and explain the mechanism of prevention and treatment of Liuwei Dihuang Pills,with the aim of providing new ideas and methods for the integrated traditional and Western medicine prevention and treatment of AD and DM in the future.

An increasing number of studies have shown that there is a close relationship between Alzheimer's disease(AD)and diabetes mellitus(DM).Traditional Chinese medicine holds that"kidney yin deficiency"is the common pathogenesis of these two diseases,while modern medicine believes that their pathogenesis involves abnormal aggregation of amyloid proteins,insulin deficiency and resistance,inflammatory response,oxidative stress,and autophagy,among others.The well-known traditional Chinese medicine formula Liuwei Dihuang Pills plays a significant role in the treatment of these two diseases with the same therapeutic approach.Therefore,this article will explore the connection between Liuwei Dihuang Pills and the treatment of AD and DM from different aspects;analyze the common etiology and pathogenesis of AD and DM,and explain the mechanism of prevention and treatment of Liuwei Dihuang Pills,with the aim of providing new ideas and methods for the integrated traditional and Western medicine prevention and treatment of AD and DM in the future.

Objective To investigate the correlation between the attenuation of periappendiceal fat density and its relative CT value(rCT)with the severity of appendicitis,and whether rCT can evaluate the severity of acute appendicitis(AA).Methods A retro-spective selection was made of 79 patients who underwent whole-abdominal CT scans and were pathologically diagnosed with A A(45 with noncomplex A A,34 with complex AA)and 30 normal control group(NCG).Appendicitis-associated signs were recorded and the CT number of periappendiceal fat(CTa),CT number of mesenteric fat gap(CTm),CT number of abdominal anterior wall subcutaneous fat(CTaw),CT number of abdominal posterior wall subcutaneous fat(CTpw),CT number of retroperitoneal fat(CTrp),CT number of gluteal subcutaneous fat(CTgl),and CT number of psoasmajor muscle(CTps)were measured.The ratio of CTa to the CT values of the other 6 parts were calculated,defined as the rCT.Statistical analysis was performed using SPSS 20.0 soft-ware,and the differences were considered statistically significant at P＜0.05.Results Compared among the three groups,statistical differences were found between every two groups in CTa,rCTm,rCTaw,rCTpw,rCTrp,rCTgl,and rCTps(P＜0.05),and the rCT was the lowest in complex AA,followed by noncomplex A A.Receiver operating characteristic(ROC)curve analysis showed that rCTm,rCTaw,rCTpw,rCTrp,rCTgl,rCTps had diagnostic predictive value for both noncomplex AA and complex AA(P＜0.05).Conclusion The attenuation of periappendiceal fat density is associated with the severity of appendicitis,and rCT has certain diagnos-tic predictive value for assessing the severity of appendicitis.The diagnosis of noncomplex AA and complex AA is based on the 95％ confidence interval of rCT.

BACKGROUND:Porous structures based on triple periodic minimal surfaces are one of the most promising orthopedic biostructures,among which the Gyroid structure is characterized by high specific surface area,high permeability,and zero mean curvature.OBJECTIVE:To screen the wall thickness interval of TC4 bionic bone scaffolds with 4 mm single-cell Gyroid structure matching the elastic modulus range of cancellous bone of the mandible through finite element analysis combined with mechanical compression test testing.METHODS:The finite element model of the 4 mm single-cell Gyroid structure with different wall thickths(0.1,0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was established.The equivalent elastic modulus of the Gyroid structure was analyzed,and the wall thickness interval of the Gyroid structure matching the elastic modulus range of the maxillary resinous bone was selected with different wall thicknesses of 0.2,0.3,0.4,0.5,0.6,and 0.7 mm,respectively.According to finite element analysis screening results,the material selected was Ti6Al4V.Selective laser melting was used to prepare 3D printed Gyroid structure specimens.The surface treatment was carried out by large-grained sand blasting and acid etching.The elastic modulus and compressive strength of the specimen were tested by mechanical compression experiment.RESULTS AND CONCLUSION:(1)The finite element analysis results showed that the equivalent elastic modulus of the Gyroid structure increased with the increase of wall thickness,and the equivalent elastic modulus of the Gyroid structure with wall thickness of 0.2-0.7 mm was within the range of the elastic modulus of the spongy bone of the mandible(1.5-4.0 GPa),which was used for 3D printing of the Gyroid structure specimen.(2)The mechanical compression test results showed that the elastic modulus and compressive strength of the Gyroid structural specimen increased with the increase of wall thickness,and the elastic modulus of the Gyroid structural specimen with wall thickness of 0.3-0.5 mm was within the range of the elastic modulus of the cancellous bone of the mandible.The compressive strength of the Gyroid specimen with 0.3-0.7 mm wall thickness was consistent with the mechanical properties of the mandible.(3)The results show that the Gyroid structure of 0.3-0.5 mm wall thickness is compatible with the range of elastic modulus of the mandible.