Abstract Allergic diseases can occur in all systems of the body, covering the whole life cycle, from children to adults and to old age, can be lifelong onset and even fatal in severe cases. Children account for the largest proportion of the victims of allergic disease, Children s allergies start from scratch, ranging from mild to severe, from less to more, from single to multiple systems and systemic performance, so the prevention and treatment of allergic diseases in children is of great importance, which can not only prevent high risk allergic conditions from developing into allergic diseases, but also further block the process of allergy. At present, there is no consensus on the management system of allergic children in kindergartens and primary schools. The "Consensus on Allergy Management and Prevention in Kindergartens and Primary Schools", which includes the organizational structure, system construction and management of allergic children, provides evidence informed recommendations for the long term comprehensive management of allergic children in kindergartens and primary schools, and provides a basis for the establishment of the prevention system for allergic children.

This study aims to explore the effect of preventive administration of Yigong Powder on the learning and memory abilities of the mouse model of aging induced by D-galactose and decipher the underlying mechanism, so as to provide a basis for the application of Yigong Powder in the prevention and treatment of cognitive decline. Forty KM mice were randomized into control, model, donepezil(1.5 mg·kg~(-1)), and high-dose(7.5 g·kg~(-1)) and low-dose(3.75 g·kg~(-1)) Yigong Powder groups. The mice in other groups except the control group were injected with D-galactose(200 g·kg~(-1)) at the back of the neck for the modeling of aging. At the same time, the mice were administrated with corresponding drugs by gavage for one month. Morris water maze was used to examine the learning and memory abilities of the mice. Hematoxylin-eosin staining was employed to observe the pathological and morphological changes of the hippocampus. The immunofluorescence assay was employed to detect the expression of ionized calcium-binding adapter molecule 1(IBA1), glial fibrillary acidic protein(GFAP), chemokine C-X-C-motif ligand 12(CXCL12), chemokine C-X-C-motif receptor 4(CXCR4) in the hippocampus and observe the positional relationship between IBA1, GFAP, and CXCR4. Western blot was employed to determine the protein levels of extracellular regulated kinase(ERK), p-ERK, and tumor necrosis factor receptor 1(TNFR1). Enzyme-linked immunosorbent assay was employed to measure the levels of glutamate and tumor necrosis factor(TNF-α) in the brain tissue and the level of TNF-α in the serum and spleen. Yigong Powder significantly shortened the escape latency, increased the times crossing platforms, and prolonged the cumulative time in quadrants of the aging mice. It alleviated the nerve cell disarrangement, increased intercellular space, and cell degeneration or death in the hippocampus and reduced the pathology score of the damaged nerve. Moreover, Yigong Powder reduced the positive area of IBA1 and GFAP, reduced the levels of TNF-α in the brain tissue, serum, and spleen, and decreased spleen index. Furthermore, Yigong Powder decreased the average fluorescence intensity of CXCL12 and CXCR4, reduced CXCR4-positive astrocytes and microglia, down-regulated the protein levels of p-ERK/ERK and TNFR1, and lowered the level of glutamate in the brain tissue. This study showed that the preventive administration of Yigong Powder can ameliorate the learning and memory decline of the D-galactose-induced aging mice by regulating the immune function of the spleen and the CXCL12/CXCR4 signaling in the brain to reduce glutamate release. However, the mechanism of Yigong San in preventing and treating dementia via regulating spleen and stomach function remains to be studied.
Mice ; Animals ; Powders ; Receptors, Tumor Necrosis Factor, Type I ; Glutamic Acid ; Tumor Necrosis Factor-alpha/metabolism* ; Galactose/adverse effects* ; Disease Models, Animal ; Cognitive Dysfunction/prevention & control* ; Chemokines ; Drugs, Chinese Herbal

In 2015, the United States put forward the concept of precision medicine, which changed medical treatment from "one size fits all" to personalization, and paid more attention to personalization and drug customization. In the same year, Spritam^®, the world's first 3D printed tablet, was in the market, marking the emerging pharmaceutical 3D printing technology was recognized by regulatory authorities, and it also provided a new way for drug customization. 3D printing technology has strong interdisciplinary and high flexibility, which puts forward higher requirements for pharmaceutical staffs. With the development of artificial intelligence (AI), modern society can perform various tasks, such as disease diagnosis and robotic surgery, with superhuman speed and intelligence. As a major AI technology, machine learning (ML) has been widely used in many aspects of 3D printing drug, accelerating the research and development, production, and clinical application, and promoting the new process of global personalized medicine and industry 4.0. This paper introduces the basic concepts and main classifications of 3D printing drug, non-AI drug optimization technology and ML. It focuses on the analysis of the research progress of ML in 3D printing drug, and elucidates how AI can empower the intelligent level of 3D printing drug in pre-processing, printing, and post-processing process. It provides a new idea for accelerating the development of 3D printed drug.

Based on the dual needs of analgesia and anti-inflammation in trauma treatment, this study uses acetaminophen and moxifloxacin hydrochloride as active pharmaceutical ingredients and develops a composite bilayer tablet with a dual-phase drug release system by using binder jet 3D printing technology. Due to the complexity of the 3D printing process, there is an interaction between the various parameters. Through the optimization of the process, the relationship between the key process parameters can be determined more intuitively. In this study, the process of extended-release tablets was optimized to maintain the mechanical properties of the tablets while realizing the regulation of release. The full-factor experimental design of three central points 2³ was used to analyze the factors that significantly affect the quality attributes of extended-release tablets and the interaction between factors. The optimal extended-release process parameters were obtained by the response optimizer: the inkjet quantity of the printing ink was 10 (about 13.8 pL), the powder thickness was 180 μm, and the running speed was 360 mm·s^-1. The in vitro of release of 3D printed composite bilayer tablets showed that the in vitro of release of 3D printed tablets and commercially available tablets conformed to the Ritger-Peppas release model. The results of porosity showed that the immediate-release layer of the preparation has many pores and large pore size, and the dissolution of the immediate release layer within 15 min was greater than 85%. The internal pore size of the extended release layer is large, but it can still release slowly for up to 8 h, the mechanism may be related to the extended release of HPMC gelation. On the basis of verifying the rationality of the design goal of 3D printed composite bilayer tablets, this study also provides a theoretical basis for the preparation of 3D printing complex preparations.

Three tricyclic [6,5,7] and six tetracyclic [6,5,5,5] novel indole alkaloids were synthesized and evaluated on triglyceride inhibitory activities for the first time. Among them, compound 4c showed the most potent activity with IC₅₀ value of 6.35 μmol·L^-1. Meanwhile, compound 4c also exhibited a good safety profile at the cellular level. Preliminary mechanism study indicated that 4c might increase intracellular lipid metabolism by activating AMPK. These results provide a novel family of lead compounds for the discovery of anti-NAFLD candidates.

Objective: To investigate the prognostic factors of children with congenital heart disease (CHD) who had undergone cardiopulmonary resuscitation (CPR) in pediatric intensive care unit (PICU) in China. Methods: From November 2017 to October 2018, this retrospective multi-center study was conducted in 11 hospitals in China. It contained data from 281 cases who had undergone CPR and all of the subjects were divided into CHD group and non-CHD group. The general condition, duration of CPR, epinephrine doses during resuscitation, recovery of spontaneous circulation (ROSC), discharge survival rate and pediatric cerebral performance category in viable children at discharge were compared. According to whether malignant arrhythmia is the direct cause of cardiopulmonary arrest or not, children in CHD and non-CHD groups were divided into 2 subgroups: arrhythmia and non-arrhythmia, and the ROSC and survival rate to discharge were compared. Data in both groups were analyzed by t-test, chi-square analysis or ANOVA, and logistic regression were used to analyze the prognostic factors for ROSC and survival to discharge after cardiac arrest (CA). Results: The incidence of CA in PICU was 3.2% (372/11 588), and the implementation rate of CPR was 75.5% (281/372). There were 144 males and 137 females with median age of 32.8 (5.6, 42.7) months in all 281 CPA cases who received CPR. CHD group had 56 cases while non-CHD had 225 cases, with the percentage of 19.9% (56/281) and 80.1% (225/281) respectively. The proportion of female in CHD group was 60.7% (34/56) which was higher than that in non-CHD group (45.8%, 103/225) (χ²=4.00, P=0.045). There were no differences in ROSC and rate of survival to discharge between the two groups (P>0.05). The ROSC rate of children with arthythmid in CHD group was 70.0% (28/40), higher than 6/16 for non-arrhythmic children (χ²=5.06, P=0.024). At discharge, the pediatric cerebral performance category scores (1-3 scores) of CHD and non-CHD child were 50.9% (26/51) and 44.9% (92/205) respectively. Logistic regression analysis indicated that the independent prognostic factors of ROSC and survival to discharge in children with CHD were CPR duration (odds ratio (OR)=0.95, 0.97; 95%CI: 0.92~0.97, 0.95~0.99; both P<0.05) and epinephrine dosage (OR=0.87 and 0.79, 95%CI: 0.76-1.00 and 0.69-0.89, respectively; both P<0.05). Conclusions: There is no difference between CHD and non-CHD children in ROSC and survival rate of survival to discharge was low. The epinephrine dosage and the duration of CPR are related to the ROSC and survival to discharge of children with CHD.
Cardiopulmonary Resuscitation ; Child ; Child, Preschool ; Female ; Heart Arrest/therapy* ; Heart Defects, Congenital/therapy* ; Humans ; Intensive Care Units, Pediatric ; Male ; Retrospective Studies

The efficient and safe delivery of drugs to the therapeutic site through the biofilm has traditionally been a difficult and hot topic in the field of drug delivery. In recent years, alkyl polyglycoside (APG) have become ideal penetration enhancers for drug delivery systems because of their high permeability, good safety and biodegradability, which has attracted wide attention of domestic and foreign researchers. In this paper, the physical and chemical properties, characteristics, action mechanism and application of APG in drug delivery system are reviewed, and its application prospect in drug delivery system is prospected.

The development of printing ink is a challenge for binder jetting 3D printed preparations, which directly determines the quality of the printed product. This study adopted a 2³ full-factor Design of Experiment (DoE) with three central points to optimize the printing ink composition of levetiracetam 3D printed dispersible tablet based on the concept of Quality by Design. Firstly, using polyvinyl pyrrolidone K30, glycerin and polysorbate 20 as independent variables based on 40% (v/v) isopropanol aqueous solution, and weight variation, hardness, friability and dispersion uniformity of the printed tablets were used as dependent variables. Then obtained the design space of the printing ink prescription by DoE model analysis, and the response optimizer was used to obtain the optimal printing ink prescription: isopropanol aqueous solution containing 0.1% (w/w) polyvinyl pyrrolidone K30 and 4.0% (w/w) glycerin. The jetting mechanism and wettability of the printing ink were analyzed, and different strengths of personalized 3D printed tablets were prepared and characterized, which verified the rationality of the printing ink formulation. This study provided a reference for the development of printing ink for binder jetting 3D printed preparations.

【Objective】To explore the feasibility and simplicity of intelligent automatic registration ultrasound-CT/ MR fusion imaging based on liver surface in localization of focal liver lesions. 【Methods】 Thirty patients with detected focal liver lesions by contrast- enhanced CT or MR were enrolled for ultrasound- CT/MR fusion imaging using the PercuNav fusion imaging system in PHILPS EPIQ7. Both intelligent automatic registration ultrasound- CT/MR fusion imaging based on liver surface（intelligent method）and the conventional internal plane method（manual method）were used for ultrasound-CT/MR fusion imaging. The success rate of registration，the initial registration error and the times of fine-tuning were compared between these two methods.【Results】In all 30 patients，the success rates of registration were both 96.67%（29/30）using intelligent method and manual method. There was no significant difference between these two methods when compared the initial registration error and the times of fine- tuning （P>0.05）. According to the further stratified analysis，in 10 lesions in the left liver，the initial registration error of the manual method was less than that of intelligent method，the difference was statistically significant（P=0.00）. Although the times of fine-tuning of the manual method was less than that of intelligent method，there was no statistically significant difference（P=0.09）；In 20 lesions in the right liver，the initial registration error and the times of fine-tuning of the intelligent method were superior to those of the manual method. The differences were statistically significant （P<0.05）. 【Conclusion】 Intelligent automatic registration ultrasound- CT/MR fusion imaging based on liver surface is a feasible method with high success rate for ultrasound-CT/MR fusion imaging. Compared with the conventional internal plane method，the fusion imaging process is more simple and efficient for the lesions in right liver. It helps to reduce experience dependence of fusion imaging for the operators.

We report a case of an 18-year-old woman with systemic antibiotic anaphylaxis who presented anasarca and bilateral visual loss two weeks after the intravenous use of pazufloxacin. Ancillary fundus tests revealed bilateral cotton-wool spots, Purtscher flecken, edema, and retinal arteriolar occlusion around the optic disc. After pulse corticosteroid, administration of anti-anaphylactic agent, and general support therapy for one month, the patient showed a favorable change, with the symptoms lessened or free systemically, except the continuous aggravation of fundus ischemic change. After two intravitreal injections of Ranibizumab, there were still a large area of capillary non-perfusion and neovacularizations in the binocular retina, resulting in vitreous hemorrhage. The patient's visual acuity had still light perception after right-eye vitrectomy and presented no improvement during the postoperative follow-up of two years. Literature review revealed that there were many causes associated with Purtscher-like retinopathy, and the consequent visual impairment varied significantly. Prompt management of the underlying condition is crucial in giving the patient the best chance to restore vision.