Objective To investigate the impact of donor kidney histopathological lesions on the risk of BK virus (BKV) infection and progression after kidney transplantation. Methods A retrospective analysis was conducted on the clinical data of 326 kidney transplant recipients from deceased donors at the Department of Kidney Transplantation, the First Affiliated Hospital of Zhengzhou University, from January 2019 to June 2020. The recipients were divided into two groups based on whether BKV infection occurred after kidney transplantation: the BKV infection group (145 cases) and the non-BKV infection group (181 cases). The correlation between donor kidney histopathological findings from zero-hour biopsy and BKV infection, as well as the impact on the risk and progression of BKV infection, was analyzed. Results The incidence of BKV infection among the 326 kidney transplant recipients was 44.5% (145/326). The clearance rate of BKV after infection was 82.1% (119/145), while 17.9% (26/145) progressed to BKV viremia. Among the 326 qualified kidney biopsy specimens, 32 cases showed mild tubular atrophy, 324 cases had mild acute tubular injury, 27 cases exhibited mild hyaline arteriosclerosis, 10 cases had moderate to severe hyaline arteriosclerosis, 7 cases showed mild interstitial inflammation, 23 cases had mild interstitial fibrosis, 6 cases exhibited mild arterial intimal fibrosis, and 1 case had moderate to severe arterial intimal fibrosis. Multivariate logistic regression analysis revealed that male recipients, donor age and tubular atrophy were independent risk factors for BKV infection (all P<0.05). Tubular atrophy was also an independent risk factor for the progression from BKV uria to BKV viremia (P<0.05). Conclusions Donor kidney histopathological lesions have a certain impact on BKV infection and progression after kidney transplantation. Patients with more severe tubular atrophy in donor kidneys have a higher risk of BKV infection after kidney transplantation and are more likely to progress to BKV viremia.

OBJECTIVE: To investigate whether adding 1 transverse screw (TS) to the triangular parallel cannulated screw (TPCS) fixation has a mechanical stability advantage for Pauwels type Ⅲ femoral neck fractures by conducting finite element analysis on four internal fixation methods. METHODS: Based on CT data of a healthy adult male volunteer's femur, three Pauwels type Ⅲ femoral neck fracture models (Pauwels angle 70°, Pauwels angle 80°, and Pauwels angle 70° combined with bone defect) were constructed using Mimics 21.0 software and SolidWorks 2017 software. Four different internal fixation models were built at the same time, including TPCS, TPCS+TS, three cross screws (TCS), and TPCS+medial buttress plate (MBP). The mechanical stability of different models under the same load was compared by finite element analysis. RESULTS: The femoral model established in this study exhibited a maximum stress of 28.62 MPa, with relatively higher stress concentrated in the femoral neck. These findings were comparable to previous studies, indicating that the constructed femoral finite element model was correct. The maximum stress of internal fixation in finite element analysis showed that TCS was the lowest and TPCS+MBP was the highest in Pauwels angle 70° and 80° models, while TPCS+TS was the lowest and TCS was the highest in Pauwels angle 70° combined with bone defect model. The maximum displacement of internal fixation in each fracture model was located at the top of the femoral head, with TCS having the highest maximum displacement of the femur. The maximum stress of fracture surface in finite element analysis showed that TCS was the lowest and TPCS was the highest in the Pauwels angle 70° model, while TPCS+MBP was the lowest and TPCS/TCS were the highest in the Pauwels angle 80° model and the Pauwels angle 70° combined with bone defect model, respectively. The maximum displacement of fracture surfece analysis showed that TPCS+MBP was the lowest and TCS was the highest in Pauwels angle 70° and 80° models, while TPCS+TS was the lowest and TCS was the highest in Pauwels angle 70° combined with bone defect model. CONCLUSION For Pauwels type Ⅲ femoral neck fractures, the biomechanical stability of TPCS+TS was superior to that of TPCS alone and TCS, but it has not yet reached the level of TPCS+MBP.
Finite Element Analysis ; Humans ; Femoral Neck Fractures/diagnostic imaging* ; Bone Screws ; Fracture Fixation, Internal/instrumentation* ; Male ; Bone Plates ; Stress, Mechanical ; Biomechanical Phenomena ; Tomography, X-Ray Computed ; Adult ; Femur Neck/surgery*

Immunotherapy has become a pivotal modality in clinical cancer treatment. However, its effectiveness is limited to a small subset of patients due to the low antigenicity, impaired innate response, and various adaptive immune resistance mechanisms of the tumor microenvironment (TME). Accumulating evidence reveals the critical roles of metal elements in shaping immunity against tumor progression and metastasis. The marriage of metalloimmunotherapy and nanotechnology further presents new opportunities to optimize the physicochemical and pharmacokinetic properties of metal ions in a precise spatiotemporal control manner. Several metallodrugs have demonstrated encouraging immunotherapeutic potential in preliminary studies and are currently undergoing clinical trials at different stages, yet challenges persist in scaling up production and addressing long-term biosafety concerns. This review delineates how metal materials modulate biological activities across diverse cell types to orchestrate antitumor immunity. Moreover, it summarizes recent progress in smart drug delivery-release systems integrating metal elements, either as cargo or vehicles, to enhance antitumor immune responses. Finally, the review introduces current clinical applications of nanomedicines in metalloimmunotherapy and discusses potential challenges that impede its widespread translation into clinical practice.

TCP family as plant specific transcription factor, plays an important role in different aspects of plant development. In order to screen TCP family members in tobacco, the homologous sequences of tobacco and Arabidopsis TCP family were identified by genome-wide homologous alignment. The physicochemical properties, phylogenetic relationships and cis-acting elements were analyzed by bioinformatics. The homologous genes of AtTCP3/AtTCP4 were screened, and RT-qPCR was used to detect the changes of gene expression upon 20% PEG6000 treatment. The results show that tobacco contains 63 TCP family members. Their amino acid sequence length ranged from 89 aa to 596 aa, and their protein hydropathicity grand average of hydropathicity (GRAVY) ranged from -1.147 to 0.125. The isoelectric point (pI) ranges from 4.42 to 9.94, the number of introns is 0 to 3, and the subcellular location is all located in the nucleus. The results of conserved domain and phylogenetic relationship analysis showed that the tobacco TCP family can be divided into PCF, CIN and CYC/TB1 subfamilies, and each subfamily has a stable sequence. The results of cis-acting elements in gene promoter region showed that TCP family genes contain low docile acting elements (LTR) and a variety of stress and metabolic regulation related elements (MYB, MYC). Analysis of gene expression patterns showed that AtTCP3/AtTCP4 homologous genes (NtTCP6, NtTCP28, NtTCP30, NtTCP33, NtTCP42, NtTCP57, NtTCP63) accounted for 20% PEG6000 treatment significantly up-regulated/down-regulated expression, and NtTCP30 and NtTCP57 genes were selected as candidate genes in response to drought. The results of this study analyzed the TCP family in the tobacco genome and provided candidate genes for the study of drought-resistance gene function and variety breeding in tobacco.
Nicotiana/genetics* ; Phylogeny ; Plant Breeding ; Amino Acid Sequence ; Arabidopsis ; Polyethylene Glycols

Objective To observe the value of artificial intelligence(AI)knowledge graph and image classification for quality control(QC)of chest posterior-anterior position X-ray radiograph(abbreviated as chest film).Methods Totally 9 236 chest films from 595 medical institutions in Anhui province imaging cloud platform were retrospectively enrolled.QC knowledge graph containing 21 classification labels were constructed.Firstly,QC of chest films based on the above knowledge graph were performed by 10 technicians for 2 rounds of single person and 1 round of multi person,and the results were recorded as A,B and C,respectively.Then AI algorithms were used to classify and evaluate based on knowledge graph,and the result was recorded as D.Finally,a QC expert reviewed results C and D to determine the final QC results and taken those as references to analyze the efficiency of the above 4 QC.Results The area under the curve(AUC)of AI algorithm for QC of chest films were all ≥0.780,with an average value of 0.939.The average precision of QC for chest films of A,B,C and D was 81.15％,85.47％,91.65％and 92.21％,respectively.Conclusion AI knowledge graph and image classification technology could be effectively used for QC of chest posterior-anterior position X-ray radiograph.

Objective:To investigate the relationship between health promoting behavior and frailty in elderly patients with proliferative diabetic retinopathy(PDR),and the mediating effects of self-efficacy and loneliness.Methods:In an eye hospital of Anhui Province,214 elderly patients with PDR were selected from May 2021 to Nov 2022 by convenient sampling method.The Frailty Scale,Chinese Version of Health-Promoting Lifestyle Profile-Ⅱ,Self-Efficacy Scale and Simplified Loneliness Scale were used in this survey.Bootstrap method of Process software was used to analyze the mediating effect of self-efficacy on the relationship between health promoting behaviors and frailty in elderly PDR patients and the moderating effect of loneliness on the relationship between self-efficacy and frailty.Results:A total of 220 questionnaires were distributed and 214 valid questionnaires were returned,with valid response rate of 97.27% .Moderated mediation effect analysis suggested that health-promoting behaviors negatively predicted frailty(β=-0.508,P＜0.01).Health promoting behaviors and self-efficacy had significant predictive effects on frailty(β=-0.191 and-0.433,P＜0.01),and health promoting behaviors also had a significant predictive effect on self-efficacy(β=0.063,P＜0.01).Self-efficacy played a partially mediating role between health promoting behaviors and frailty,and the mediating effect accounted for 14.76% of the total effect.The product term of loneliness and self-efficacy significantly predicted frailty(β=0.255,P＜0.01),the mediating effect of self-efficacy on frailty was moderated by loneliness.Conclusions:The health-promoting behaviors of elderly patients with PDR affect frailty through self-efficacy,and loneliness moderates the relationship between self-efficacy and frailty.The moderated mediation model is established.

Objective:To introduce the clinical application of three-dimensional(3D) printed titanium alloy prosthesis in the reconstruction of mandibular defects.Methods:Three patients with extensive mandibular defects, who were either ineligible for or refused autologous bone transplantation were selected from the Oral and Maxillofacial-Head and Neck Oncology Department at School & Hospital of Stomatology, Wuhan University between April 2019 and December 2021. Preoperative oral and maxillofacial CT scanning was performed, followed by a virtual surgical plan and the design and manufacture of titanium mandibular prosthesis as well as the surgery guide-plate. Repair of mandibular defects using 3D printed titanium mandibular prosthesis. Follow-up after surgery to evaluate the patient’s functional and cosmetic recovery.Results:The study included three male patients aged 27, 10 years and 8 months, and 74 years, respectively. Two cases involved recurrent mandibular tumors postoperatively, and one case involved mandibular defects following gingival tumor surgery that affected the patient’s facial appearance and eating. All surgeries were successfully completed, with postoperative outpatient follow-ups at 36, 32, and 6 months, respectively. Follow-up indicated that the facial contours were basically symmetrical, the degree of mouth opening was normal, and the occlusion on the healthy side was essentially normal. No exposure, loosening, or fracturing of the prostheses was observed.Conclusion:3D printed titanium mandibular prosthesis can effectively restore the facial contour and mandibular function of patients.

Objective:To introduce the clinical application of three-dimensional(3D) printed titanium alloy prosthesis in the reconstruction of mandibular defects.Methods:Three patients with extensive mandibular defects, who were either ineligible for or refused autologous bone transplantation were selected from the Oral and Maxillofacial-Head and Neck Oncology Department at School & Hospital of Stomatology, Wuhan University between April 2019 and December 2021. Preoperative oral and maxillofacial CT scanning was performed, followed by a virtual surgical plan and the design and manufacture of titanium mandibular prosthesis as well as the surgery guide-plate. Repair of mandibular defects using 3D printed titanium mandibular prosthesis. Follow-up after surgery to evaluate the patient’s functional and cosmetic recovery.Results:The study included three male patients aged 27, 10 years and 8 months, and 74 years, respectively. Two cases involved recurrent mandibular tumors postoperatively, and one case involved mandibular defects following gingival tumor surgery that affected the patient’s facial appearance and eating. All surgeries were successfully completed, with postoperative outpatient follow-ups at 36, 32, and 6 months, respectively. Follow-up indicated that the facial contours were basically symmetrical, the degree of mouth opening was normal, and the occlusion on the healthy side was essentially normal. No exposure, loosening, or fracturing of the prostheses was observed.Conclusion:3D printed titanium mandibular prosthesis can effectively restore the facial contour and mandibular function of patients.

Purpose/Significance Based on the concepts of healthy cities and smart cities,the paper introduces a new concept-smart healthy cities.It explores the definition,scope,function,challenges,and strategic responses associated with the concept.Meth-od/Process Through literature review and case study analysis,the theoretical foundations,characteristics,objectives,and implementa-tion strategies of healthy cities and smart cities are compared,revealing differences and points of convergence,proposing the origins,def-initions,and delineations of smart healthy cities,and exploring the relationships among healthy cities,smart cities,and smart healthy cit-ies.Result/Conclusion Smart healthy cities enhance urban health governance and the well-being of residents through technological in-novation.Effective integration of advanced technologies with urban governance policies is essential,alongside the implementation of di-verse strategies to drive progress.Future urban development should focus more on the theoretical and practical collaborative development within the smart healthy cities framework.

Purpose/Significance To expound the development of the application of new generation intelligent technologies in the medi-cal field in China,and to provide ideas for the future development of intelligent medical technologies in China.Method/Process Literature related to the application of medical intelligence technology from 2000 to 2023 is searched and screened on CNKI,and the knowledge graph is drawn by descriptive statistical analysis and CiteSpace software for visualization analysis.Result/Conclusion The number of papers pub-lished in the application research field of domestic medical intelligence technology shows a trend of steady growth and then leveling off.The hot keywords mainly include smart medical care,health care,health management,etc.,forming 8 main cluster sets.Future research should strengthen cooperation and exchanges between researchers and organizations,and pay more attention to the challenges posed by the applica-tion of technology in terms of security and privacy,technology supervision,talent team construction and technological energy consumption.