Pulmonary interstitial fibrosis (PIF) is a common complication of connective tissue disease (CTD). The patients with PIF usually manifest with intensive dry cough, progressive dyspnea aggravated by activities, and even weight loss and very fatigued. In this paper, we have applied the traditional methods of "invigorating qi for ascending" and "strengthening earth to generate metal" with modif ied Shenxian decoction for treating CTD combined with PIF to support healthy energy, ascend thoracic qi, and ascend both qi of lung and spleen. We have observed Shenxian decoction could enhance body immune system, benefit the repair of damaged lung tissues, improve microcirculations, and treat both branch and root of body, which has been giving patients prominent effects.

For more than a century, surgical treatment of gastric cancer is always a subject of debate, es-pecially for the extent of lymph nodes dissection for advanced gastric cancer (AGC). In this article, we re-viewed the advances on lymph node excision in AGC.

Objective To study the treatment of neonate-infants after open-heart surgery during perioperafive period.Methods The clinical data of 1619 neonate-infants during perioperative period were analyzed.Results 68 cases died,mortality 4.2%.Postoperative complication 190 cases(11.7%).Conclusion The management of components and quantities of the infusion,admistration of cardiovascular drugs,the management of respiratory tracts and the protection of heart function,ale main points of perioperafive therapy of neonate-infants after open-heart surgery.

Objective To evaluate the effect of type Ⅱ odontoid fracture,type Ⅰ Hangman fracture,C2-C3 disc injury on stability of C1-C2 and C2-C3 segments and investigate the clinical significance.Methods Ten fresh-frozen cadaveric cervical specimens (5 men and 5 women; 25-45 years of age,mean 35.7 years) were selected to test the stability of C1-C2 and C2-C3 segments in the settings of intact condition (control group),type Ⅰ Hangman fracture,type Ⅱ odontoid fracture,type Ⅰ Hangman fracture + type Ⅱ odontoid fracture,type Ⅰ Hangman fracture + type Ⅱ odontoid fracture + C2-C3 disc injury.Range of motion (ROM) and neutral zone (NZ) of those segments were measured.Results Compared with the intact condition,type Ⅰ Hangman fracture produced no significant variations in C1-C2 ROM in all loading modes and C2-C3 ROM during left and right lateral bending; type Ⅱ odontoid fracture produced no significant variations in C2-C3 ROM in all loading modes and C1-C2 ROM during left and right rotation; type Ⅰ Hangman fracture + type Ⅱ odontoid fracture revealed no significant variations in C1-C2 ROM during left and right rotation and C2-C3 ROM during extention; type Ⅰ Hangman fracture + type Ⅱ odontoid fracture + C2-C3 disc injury produced no significant variations in C1-C2 ROM during left and right lateral bending and extension-flextion and C2-C3 ROM in all loading modes (P ＜ 0.05).Conclusions Type Ⅰ Hangman fracture can reserve C1-C2 segmental left and right rotation and extension-flextion; type Ⅱ odontoid fracture can reserve C1-C2 segmental left and right lateral bending and extension-flextion; type Ⅰ Hangman fracture + type Ⅱ odontoid fracture + C2-C3 disc injury can reverse atlantoaxial rotationary stability and C1-C3 segmental stability in all directions.This study provides the biomechanical basis for clinical treatments and the related researches of internal fixation.

Objective To observe the correlation of MRI findings with treatment outcome of percutaneous kyphoplasty (PKP) in the acute phase of osteoporotic vertebral compression fracture (OVCF).Methods A total of 101 patients with single-segment OVCF undergone PKP in the acute phase were included in the study.There were 19 males and 82 females, at age range of 61 to 89 years (mean, 69.3 years).According to the T2WI signal intensity, the patients were divided into low signal group (Group A), low-medium signal group (Group B), medium signal group (Group C), and mediumhigh signal group (Group D).visual analogue scale (VAS) was used to evaluating the pain relief.Correlations of MRI signal with vertebral height, vertebral compression ratio, Cobb's angle change in each group were determined.Results All MRI images were shown as low signal in T1WI and high signal in FS-T2WI.On the T2WI images, the signal was medium-high in 14 vertebrae, medium in 18 vertebrae, low-medium in 31 vertebrae, and low in 38 vertebrae.Among four groups, the VAS score, vertebral body height, vertebral compression ratio and Cobb's angle changes before operation showed no statistical difference compared with those after operation (P ＜ 0.05).Conclusions MRI findings are primarily low or medium signal on T2WI images in the acute phase of OVCF, which shows insignificant correlation with effect of PKP.However, PKP is effective in the treatment of OVCF.

Objective To investigate the clinical outcomes of pedicle screw fixation assisted with the 3D printing positioning guide template for treatment of unstable atlas fractures.Methods A retrospective case series review was made on 10 patients with unstable atlas fractures undergone direct posterior C1 pedicle screw fixation assisted with the 3D printing drill guide template from September 2012 to May 2015.There were 7 males and 3 females,with a mean age of 52.6 years (range,23-75 years).All patients complained of neck pain,stiffness and decreased range of motion without neurologic deficit.Preoperative skull traction was used routinely.After the three-dimension reconstruction of cervical vertebrae,ideal trajectory for C1 pedicle screws was designed with a complementary basal template for posterior surface of atlas corresponding anatomical structure.Then the drill guide template was materialized in a rapid prototyping machine and used during operation.Start point and direction of the ideal and actual trajectories were measured after matching the position of the pre-and post-operative patients' cervical spine.Safety of pedicle screw fixation was assessed in the transverse and sagittal planes of CT scan.Operation time and blood loss were recorded.Visual Analogue Scale (VAS) of neck pain was recorded before operation and 3 months after operation.Clinical efficacy,fracture reduction,stability and surgical complications were reviewed at the follow-up.Results A total of 20 screws were inserted safely.No significant differences existed in deviation of entry point and direction between ideal and actual trajectories (P ＞0.05).Operation time was 60-90 min (mean,75 min) and intraoperative blood loss was 110-300 ml (mean,160 ml).No spinal cord or vertebral artery injury was noted during operation.All patients were followed up for 12-36 months (mean,20.5 months).VAS was improved from preoperative 7.3 (6.3-9.5) points to 1.4 (0.3-2.5) points 3 months after operation (P ＜ 0.05).All patients had normal range of motion of the cervical spine 3 months after operation.Bony fusion was achieved 6 months after operation.At the follow-up,good cervical alignment was maintained with no instrument failure and C1.2 instability.Conclusion For treatment of unstable atlas fractures,direct posterior C1 pedicle screw fixation assisted with the 3D printing drill guide template can improve the precision of screw placement,reduce complications,and preserve the function of the occipital-atlantoaxial junction.

Objective To investigate the effect and its mechanism of diazoxide on the blood-brain barrier (BBB) of rats after cerebral ischemia/reperfusion (I/R) injury.Methods Sixty Wistar rats were randomly divided into sham operation group,I/R group,and diazoxide pretreatment groups of low,middle,large dose (5,10,20 mg/kg).The I/R models of rats were performed to undergo middle cerebral artery embolism by thread.BBB permeability was estimated by Evans blue (EB) dyeing,transmission electron microscope (TEM) was used to observe the modification of interendothelial tight junction (TJ) of capillaries.The expression of aquaporin-4 (AQP4) in every rat brain tissues was detected by immunity histochemistry technique.Results (1) Compared to sham operation group,the permeability extent of EB were significantly increased by I/R,which was distinctly attenuated in middle and large dose of diazoxide pretreatment rats,while no obvious changes were found between I/R and low dose groups.(2) TEM showed that TJ of the brain tissue opened after I/R injury and no significant opening of TJ was observed in middle and large dose of diazoxide preconditioning groups.(3) Compared to sham operation group,the expression of AQP4 in the brain tissue of the I/R group was apparently increased (P ＜0.01).Compared to I/R group,the expression of AQP4 was apparently increased in middle and large dose pretreatment groups (P ＜ 0.01),and there were no obvious difference between low dose group and the I/R group.Conclusions Preconditioning of ischemia/reperfusion injury with diazoxide protects the blood-brain barrier,which may due to keep the TJ closed and decrease expression of AQP4 protein.

Objective To validate the safety and accuracy of a rapid prototyping drill template (RPDT) for posterior atlantoaxial transarticular screw placement and analyze factors for screw deviation.Methods Twelve normal cadaveric cervical spines were examined using 64 slice CT with 1-mm thick scan and data in Dicom format were recorded.After data was processed using software Mimics 10.01 for three-dimensional (3-D) model reconstruction,computer-assisted design of optimum trajactory for atlantoaxial transarticular screw placement was worked out and made into a drill template,where the surface was created as the inverse of axial posterior surface.The drill template was materialized in a rapid prototyping machine and used to place the screws.After surgery,the position of posterior atlantoaxial transarticular screw was evaluated by X-ray and CT scan.Screw entry point,angle and orientation of the optimal and actual trajactory were determined after fitting the position of the pre-operative and post-operative specimen in computer software and the redefining the 3-D coordinate axis.Results Twenty-four screws were implanted with no cortex perforation.Depth of the optimum save screw trajectory for atlantoaxial transarticular fixation was (37.34 ± 2.31) mm on the left side and (37.11 ± 2.21) mm on the right side.Introversion angles of the optimum save screw trajectory was 0° in both sides,but the actual angle was (0.15 ±0.58)°on the left side and (0.11 ±0.46)°on the right side.Elevation angle of the optimum save screw trajectory was (49.35 ± 1.62) °on the left side and (48.83 ± 1.83) ° on the right side,but the actual angle was (49.29 ± 1.68) °and (49.10 ± 1.45) °respectively.Average displacement of screw entry point in the x,y and z axis was respective (0.21 ±0.65) mm,(0.69 ± 1.48) mm and (0.39 ±0.11) mm on the right side,while (0.19 ± 0.66) mm,(0.53 ± 1.45) mm and (0.38 ± 0.13) mm on the left side.There were no statistically significant differences in deviation levels of entry point and orientation between the optimum and actual screw trajectory (P ＞ 0.05).Conclusions Causes for deviation in RPDT-assisted placement of atlantoaxial transarticular screw are mainly intrinsic factors of the hardware and software and human factors in the operation.RPDT is easy in operation and has individualized design,which greatly improves the accuracy of screw placement and reduces screw deviation.RPDT can be widely used in clinical practice.

Objective To design a new cancer vaccine by using alpha-galactosylceramide (α-Galcer,α-GC) loaded tumor cells in combination with TLR 9 ligand and to evaluate its therapeutic effects on colon canc-er in mice.Methods MC38 cells were transfected with lentivirus (GFP-CD1d) to prepare CD1d-MC38 cells. The expression of CD1d molecules in CD1d-MC38 cells was detected by fluorescence microscopy , RT-PCR and flow cytometry.The sorted CD1d-MC38 cells were loaded with α-Galcer to prepare CD1d-MC38/α-GC complex. Flow cytometry was performed to evaluate the efficiency of combination .A mouse model of colon cancer was es-tablished to investigate the therapeutic effects of α-Galcer loaded tumor cells in combination with TLR 9 ligand ( CD1d-MC38/α-GC+CpG1826) on colon cancer in mice by analyzing tumor growth and mice survival time .Im-munohistochemical staining was used to detect CD 4+T and CD8+T infiltrating lymphocytes in tumor tissues .Re-sults The MC38 cancer cells that expressed CD 1d and GFP were successfully constructed , among which 98.10%±2.53%were positive for CD1d.Moreover, the CD1d-MC38 cells could combine with α-Galcer effec-tively in a dose and time dependent manner .Compared with PBS treated group ,α-GC treated group and TLR9 ligand treated group , the experimental vaccine strategy was sufficient to inhibit the growth of established tumors and prolong survival of tumor-bearing mice (P<0.01).Immunohistochemistry analysis revealed that levels of CD4+T cells and CD8+T cells in experiment group were significantly higher than those in groups treated with PBS,α-GC and TLR9 ligand (P<0.01).Conclusion CD1d-MC38/α-GC in combination with CpG1826 could efficiently inhibit the growth of established tumors and prolong survival of tumor-bearing mice .Immunohisto-chemistry analysis revealed that CD 4+T cells and CD8+T cells played important roles in anti-tumor immunity.

Objective To explore an ideal screw insertion point and optimal trajectory for anterior axis pedicle screw (AAPS) so as to provide an anatomical basis for AAPS placement.Methods CT scan of the cervical spine was performed for 40 healthy Chinese adults.Then,the CT data were imported into the Mimics software to reconstruct the three-dimensional images of the axes.The data were divided into two groups according to the gender.The following data were measured:pedicle centerline minimal diameter on both left and right sides,pedicle axial length,the distance between entrance point and upper endplate,the distance between entrance point and median sagittal plane,the distance between entrance point and peak of crista lambdoidalis of C2 vertebral body,extraversion angle and sagittal angle.The screw fixation parameters for AAPS were measured using the Mimics software.Results There was no statistical difference between the left and right sides as well as between the genders (P ＞ 0.05).The entrance point for insertion of AAPS was recommended to be on (4.39 ± 0.67) mm from the upper endplate,and on (3.95 ± 0.44) mm from the median sagittal plane.The ideal pedicle axial length was (34.15 ± 2.93) mm,and the pedicle centerline minimal diameter was (7.04 ± 0.87) mm.The distance between the entrance point and the peak of crista lambdoidalis of C2 vertebral body was (1.45 ± 0.19) mm.The ideal extraversion angle was (30.80 ± 2.79) °,and the ideal sagittal angle was (36.35 ± 3.26) ° . Conclusion The ideal insertion pathway of AAPS placement can avoid spinal canal,foramen intervertebrale and other important anatomical structure,which is feasible in regard of anatomy.The insertion point can refer to the peak of crista lambdoidalis of C2 vertebral body.However,AAPS placement should be individualized in term of its anatomy variability.