Objective: To investigate the influencing factors for mild cognitive impairment (MCI) among the elderly inpatients of the department of geriatrics, so as to provide the reference for early screening and prevention of MCI in the elderly population. Methods: Inpatients aged 60 years and older and admitted to the Department of Geriatrics at the First Affiliated Hospital of Xinjiang Medical University were selected as the study subjects. Demographic information, past medical history, activities of daily living (ADL), depressive symptoms were collected through questionnaire surveys. MCI was diagnosed with Montreal Cognitive Assessment in combination with medical history and physical examination. Factors affecting MCI were identified using a multivariable logistic regression model. Results: A total of 1 019 elderly patients were collected, including 472 males (46.32%) and 547 females (53.68%), and had a median age of 73.00 (interquartile range, 14.00) years. Among them, 746 patients had an educational level of junior high school or above, accounting for 73.21%, 446 patients had cerebrovascular disease, accounting for 43.77%, and 220 patients were diagnosed with MCI, with a detection rate of 21.59%. Multivariable logistic regression analysis showed that age (OR=1.354, 95%CI: 1.285-1.426), educational level (primary school, OR=0.345, 95%CI: 0.163-0.731; junior high school or above, OR=0.196, 95%CI: 0.096-0.402), ADL (moderate/severe dependence, OR=4.744, 95%CI: 2.044-11.012) and cerebrovascular disease (OR=2.335, 95%CI: 1.482-3.679) were the influencing factors for MCI among geriatric inpatients. Conclusions The MCI of the elderly inpatients of the department of geriatrics is related to age, educational level, ADL and cerebrovascular disease. Therefore, targeted health education and cognitive function training should be provided for elderly patients to prevent MCI.

Objective To compare the clinical efficacy and radiologic changes between constrained and non-constrained titanium plate in anterior cervical corpectomy and fusion (ACCF) in elderly cervical spondylosis patients.Methods A total of 58 elderly cervical spondylosis patients who underwent ACCF were divided into group 1 (patients treated with constrained titanium plates,n =30) and group 2 (patients treated with non-constrained titanium plates,n=28).The Japanese Orthopedic Association (JOA) score,fusion rate,the loss of segmental height and cervical lordosis were recorded.The clinical efficacy and imaging features were compared between the two groups.Results The improvement rate of JOA score had no significant differences between group 1 and group 2 [(77.7±18.6)％ vs.(75.8±23.2)％,t=0.340,P＞0.05].At 3 months after operation,the fusion rate was higher in group 2 than in group 1 (89.3％ vs.63.3％,x2 =5.327,P＜0.05).At 3,6 and 12 months after operation,there were no significant differences in the loss of segmental cervical height and lordosis between group 1 and group 2 [(2.42±3.05)mm vs.(0.98±2.86)mm,(3.95±3.65)mm vs.(2.34±2.97)mm,(3.60±4.33)mm vs.(2.40±2.96)mm,(1.64±2.33)° vs.(0.66 ± ±2.14)°,(2.13∧±±3.79)° vs.(0.70±2.99)°,(2.39±4.26)° vs.(0.86±3.25)°,respectively,all P ＞0.05].Conclusions The clinical efficacy is similar in ACCF with the two types of titanium plates.The non-constrained titanium plate can increase the fusion rate in early time,but may aggravate the loss of segmental cervical height and lordosis,which should be used with caution in elderly osteoporosis patients.

{L-End}Objective To understand the influence of job burnout and anxiety symptoms on work ability of biosafety laboratory (BSL) workers in Xinjiang Uygur Autonomous Region. {L-End}Methods A total of 5 808 BSL workers in Xinjiang Region were selected as the research subjects using cluster sampling method. The Job Burnout Questionnaire, Anxiety Self-rating Scale and Work Ability Index Questionnaire were used to evaluate their job burnout, anxiety symptoms and work ability. The mediation effect of anxiety symptoms on the relationship between job burnout and work ability was tested by stepwise regression analysis. {L-End}Results The detection rate of job burnout, anxiety symptoms and poor working ability was 83.1% (4 829/5 808), 37.2% (2 160/5 808) and 5.8% (339/5 808), respectively. There was a positive correlation between job burnout and anxiety symptoms score in BSL workers ［correlation coefficient (r) was 0.48, P<0.01］. The score of job burnout and anxiety symptoms was negatively correlated with the work ability score (r were -0.58, -0.51, both P<0.01). The results of mediation effect analysis show that the total effect of job burnout on work ability was -0.31, with the direct effect of -0.15. The mediation effect of anxiety symptoms on the relationship between job burnout and work ability was -0.16, accounting for 51.6% of the total effect. {L-End}Conclusion The detection rates of job burnout and anxiety symptoms among BSL workers in Xinjiang Region are relatively high. Anxiety symptoms show a mediate effect on the relationship between job burnout and work ability. The work ability of BSL workers can be improved by improving job burnout and anxiety symptoms.

We examined the biocompatibility and the safety of a-calcium sulfate hemihydrate (CSH)/multi-walled carbon nanotube (MWCNT) composites for bone reconstruction application. The biocompatibility of the CSH/MWCNT composites was evaluated by the measures which taking L929 fibroblast cells cultured in the extracted liquid of the composite soaking solution and putting bone marrow stromal cells planted on the composite pellets in vitro, respectively. The cell proliferation was evaluated by MTT test and further observed using an inverted optical microscope and a scanning electric microscope. The toxicity of the composites was evaluated by acute and subacute systemic toxicity test. Long-term muscle and bone implantation in vivo tests were also conducted. L929 fibroblast cells grew well in the extracted liquid, as well as bone marrow stromal cells that could adhere on the surface of sample pellets and proliferated rapidly. MTT test showed that there were no significant differences between the experimental and control groups (P > 0.05). In vivo test manifested that the composites were no toxicity, no irritation to skin and good for bone defect reconstruction. It was proved that a-calcium sulfate hemihydrate (CSH)/multi-walled carbon nanotube (MWCNT) composites exhibited excellent biocompatibility for the potential application in bone tissue engineering.
Animals ; Biocompatible Materials ; chemistry ; Bone Marrow Cells ; cytology ; Bone Substitutes ; chemical synthesis ; chemistry ; Calcium Sulfate ; chemistry ; Cell Line ; Cell Proliferation ; Fibroblasts ; cytology ; Materials Testing ; Nanotubes, Carbon ; chemistry ; Rabbits ; Stromal Cells ; cytology ; Tissue Engineering ; methods ; Toxicity Tests

Objective:To explore the application effect of flipped classroom model based on Simodont dental training system in the standardized training teaching of prosthodontics.Methods:The control experiment was used in this study. Seventy two students from Batch 2018 and Batch 2019 of Stomatology Hospital of Air Force Medical University were selected and randomly divided into experimental group (flipped classroom model based on Simodont dental training system) and control group (Simodont dental training system training mode after traditional teaching), with 18 students every academic year in each group. Questionnaire survey was conducted to evaluate the teaching effect, and the results of after-class theory test and practical computer test were compared between the two groups. SPSS 20.0 was used for chi-square test and t test. Results:The experimental group was better than the control group in enhancing classroom interest, improving the ability of independent analysis and problem-solving, and cultivating the ability of cooperation and expression ( P<0.05). The scores of after-class theory test and practical computer test in the experimental group [(23.36±0.21) points and (90.56±0.52) points] were significantly better than those in the control group[(21.81±0.25) points and (88.31±0.48) points] ( P<0.01). Conclusion:The flipped classroom model based on Simodont dental training system can effectively improve the effect of standardized training and teaching of professional skills in prosthodontics. At the same time, the students' ability of independent analysis and problem solving, cooperation and communication and expression are effectively improved.

Objective: To investigate the effect of a metal occlusal surface and stress interruption design on minimally invasive prosthodontics for patients with distal extension absence and insufficient occlusal gingival distance. Methods : We retrospectively studied the case of minimally invasive prosthodontic (Vitallium 2000) combined with a metal occlusal surface for distal extension absence in a patient with insufficient occlusal gingival distance; the stress breaking design and pressure impression technology are examined, and relevant articles are reviewd. Results: The design effectively solves the problems of insufficient occlusal gingival distance, large occlusal force and easy denture fracture. Reviewing the relevant literature, stress interruption design can effectively protect abutment teeth, but the behavior of stress interruption design and stress conduction phenomena in the mouths of patients has not been reported. The T-scan test results of this study showed that before and after wearing the denture, the occlusal force distribution ratio of the patient changed from 77.5% on the left and 22.5% on the right to 61.3% on the left and 38.7% on the right. The occlusal force distribution ratio of the right dentition to the total occlusal force increased by 16.2%, and the occlusal force became better distributed. Further analysis showed that the occlusal forces on the left and right sides were nearly the same in the initial occlusion stage. As the occlusal force was further increased, the proportion of the occlusal force on the right side decreased in the middle of the occlusion stage and further decreased in the final occlusion stage until it reached a dynamic balance. The above T-scan test and literature review results suggest that this dynamic balance phenomenon of bite force is related to the stress interruption design and the stress conduction effect of the split framework. Conclusion The composite of stress interruption design and metal occlusal surface allows for minimally invasive prosthodontics for the treatment of distal extension absence in patients with insufficient occlusal gingival distance.