PROBLEM: The several studies were reported to the effects of individual tooth tray with the parallel tooth, but not reported to the effect of individual tooth tray with severe undercut in impression making. PURPOSE: The purpose of this study is to examine the effect of individual tooth tray; 1) the accuracy of impression in in terms of distance. 2) reproducibility of pocket. MATERIAL AND METHODS: In this study, a metal model with 3 teeth including tooth prepared 30-degree undercut and gingival crevice of the depth 5mm, width 0.4mm was cast. Impressions of the metal model were taken in 5 times used 4 kinds of impression materials with individual tooth tray and another impression taking were made with conventional method without individual tooth, used same materials, procedure. The stone models were made. Distances between abutments were measured with a Micromeasurescoup-mm. RESULT: The following results were obtained; 1. In the comparison of inter-abutment distance between parallel tooth without individual tooth tray, 4elastomeric materials have not significant difference to the metal model(p>0.05). 2. In the comparisonof inter-abutment distance with undercut tooth without individual tooth tray, 4elastomeric materials have a significant difference to the metal model(p<0.05), especially polyether's dimensional change is large. 3. If individual tooth tray was used to take impression in abutment teeth with severe undercut, more stable results was achieved easily than conventional metho.(p>0.05). 4. It is not true that the pressure of impression material with individual tooth tray increased to gingival sulcus. CONCLUSION: By the results, I knew the fact that individual tooth tray was useful impression method on the teeth with severe undercut for the dimensional stability. Also, I could not confirm the fact that individual tooth tray would increase the penetrating pressure into cervice.
Tooth*

No abstract available.
Tooth*

The purpose of this study was to compare the initial apical file(IAF) first file that fits to the apex in each canal before and after early flaring to analyze if the size of file to fit to the apex would increase after flaring. Eighty anterior teeth with complete apical formation and patent foramens were selected. The samples were randomly divided into 4 groups(GG, OS, GT, PT Group) of 20 teeth each. A file was fit to the apex in each canal and that size recorded. Radicular flaring were completed using different types of instruments. After flaring a file was again fit to the apex in the same manner as before and its size recorded. The results of this study were as follows: 1. The mean diameter of IAF before flaring(file diameters in mmx10-2) was 19.81+/-8.32 before and 25.94+/-9.21 after(p<0.05). 2. The increase in diameter of IAF was approximately one file size for all groups. 3. Ranking of increasing diameter of IAF were GG>GT>OS>PT group. There was a statistically significant difference between before and after flaring(p<0.05). 4. Ranking of the time for flaring were GG>GT>OS>PT group. There was a statistically significant difference between GG group and other groups(p<0.05). 5. In the case without change of IAF diameter, they showed decrease in force after flaring when IAF was pulled out from root canal(p<0.05). This study suggested that early radicular flaring increases the file size that is snug at the apex, and awareness of that difference gives the clinician a better sense of canal size. Early flaring of the canal provides better apical size information and with this awareness, a better decision can be made concerning the appropriate final diameter needed for complete apical shaping.
Tooth

No abstract available.
Tooth*

No abstract available.
Tooth*

No abstract available.
Tooth*

No abstract available.
Tooth*

Anterior set back segmental surgery has been used for shortening the period of orthodontic treatment in case of bimaxillary or maxil-lary protrusion. In most cases, it requires pre-operative orthodontic treatment. Through properly performed leveling and tooth aligning, the operative porcedure can be easier and post-operative occlusal stability can be increased. But it takes time for orthodontic treatment. Recently, we have been using anterior segmental surgery before orthodontic treatment and have reliable results from that. Therefore, we have to consider arch shape, curve of Spee, tooth selection to be extracted for obtaining of post-operative occlusal stability without preoperative orthodontic treatment.
Tooth

Determination of force system and prediction of side effects from unbent straight wire engaged in edgewise bracket is clinically very difficult because it is statically indeterminate system. This study is to develop a linear beam theory that explains the force system for straight wire engaged in edgewise bracket regardless of geometry(a/b), material, cross section of wire, and interbracket distance. 1. Formula for force system of bilateral fixed end beam was derived. 2. It is possible to calculate force system of each tooth engaged in continuous straight wire. 3. The possibility and location of permanent deformation can be predicted.
Tooth

Identifi cation of unknown suspect through bite marks has always been challenging. Narrowing list of suspects through sex and race markers is always recommend but rarely utilized due to limited publication in this area. Thus, this preliminary research was aimed to study the difference of bite mark made on dental wax between sex and race. A sample size of 40 UKM undergraduates comprising of Malay (male = 10, female = 10) and Chinese (male = 10, female = 10) were used in this study. Bite mark of subject was obtained through dental wax, digitally scanned and analyzed using Image-J software. Parameters measured were anterior teeth size, intercanine width and anterior teeth relative rotation. Result indicated that mandible left canine tooth size had signifi cant sexual dimorphism (p < 0.05) in differentiating sex. The means for male and female measured were 4.63 ± 1.05 mm and 5.35 ± 0.87 mm respectively. In addition to the result, tooth size of maxillary left canine and mandible left lateral incisor were signifi cantly different (p < 0.05) between races. Means for mandible left canine Malay and Chinese were 5.27 ± 1.01 mm and 4.50 ± 1.22 mm respectively. Furthermore, left lateral incisor mandible had means of 5.15 ± 0.87 mm and 4.60 ± 0.74 mm for Malay and Chinese respectively. Unfortunately, there were no signifi cant differences for intercanine width and anterior teeth relative rotation between the two major races in Malaysia. In conclusion, this research has demonstrated the possibility of using tooth size of mandible left canine, maxillary left canine and mandible left lateral discriminate sex and race.
Tooth