Objective To analyze the clinical therapeutic effect of lumbar fusion in the treatment of lumbar degenerative diseases in the spine pelvic sagittal balance. Methods From June 2009 to June 2012,the clinical data of 92 cases with lumbar degenerative diseases ac-cepted lumbar spinal fusion operation in our hospital was collected. The contrast lumbar lordosis ( LL) ,lumbar sagittal vertical axis ( SVA) , pelvic incidence angle ( PI) ,sacral inclination angle ( SS) ,pelvic tilt angle ( PT) and other numerical parameters,using the Oswestry disabil-ity index ( ODI) ,visual analogue scale ( VAS) and the Japan Society of Department of orthopedics ( JOA) score were followed up two years after operation,and the postoperative effect was evaluated. Results The spinal pelvic parameters SVA,LL,SS and PT after surgery were changed obviously,and the difference was statistically significant(P<0. 05). The postoperative follow-up of VAS,ODI and JOA score were better than that of preoperation,the difference was significant(P<0. 05). Conclusion Lumbar fusion operation can restore lumbar lordosis, to maintain the spine pelvic sagittal balance and improve the effect of operation,and have positive significance to improve the postoperative symptoms.

Objective To study the mechanism, pathology and treatment of the lung injury after spinal cord injury. Methods Models of spinal cord injury were made with modified Allen methods in 40 rabbits and divided into Group A (control group) and Group B (experimental group). Group B was treated with dexamethasone (0.35mg/k/d) by intravenous drip at first 3 days. The rabbits of spinal cord injury were killed for autopsy at different time points and their lungs were observed pathologically. Results Different degrees of lung injury, with hemorrhage of lung (100 %), occurred after spinal cord injury. The hemorrhage of lung in Group B which received the administration of dexamethasone was obviously slighter than that in Group A (P

Objective To discuss the effect of tetrandrine on endogenous neural stem cell proliferation and differentiation after spinal cord injury in rats. Methods 78 rats were randomly divided into 3 groups: control group(n=36), Tet-treated group(n=36), sham-operated group(n=6). Control group and Tet-treated group were adapted with Allen's combat modeling method. Rats in Tet group were injected Ted with a dosage 22.5 mg/kg in 30 minutes, 24 hours and 48 hours after ASCI, and the same dose of saline was injected into injured group as control .Samples were dissected from the spinal cord injury sites at 1 day, 3 days, 1 week, 2 weeks, 3 weeks, 4 weeks after ASCI, and tested by HE staining for morphology and by immunolfuorescence staining for the expression of BrdU and nestin. Results A little Nestin positive cells and BrdU positive cells were found in control group and Tet-treated group at 1 day after injury. A large number of positive cells were found in both groups at 1 week after injury and reached the peak which lasted for 2 weeks and then decreased gradually. The expression of Nestin positive cells and BrdU positive cells in control group and Tet-treated group were decreased significantly at 4 weeks after injury, but were still more than that in sham operation group. The number of Nestin positive cells and BrdU positive cells in Tet-treated group were more than that in control group at each time point after injury. The expression was higher in Tet-treated group than control group at 1 day, 3 days, 1 week, 2 weeks, 3 weeks after injury and had no difference at 4 weeks after injury. Conclusions Tetrandrine could increase the number of Nestin positive cells, BrdU positive cells and endogenous neural stem cells though improving the microenvironment, and it is beneficial for the recovery of spinal cord injury in rats.

Objective To measure the effect of tetrandrineon (Tet) on inflammatory mediators and endogenous neural stem cell proliferation after spinal cord injury (SCI) in rats.Methods A total of 162 Wistar rats were separated into injury group,Tet group and sham operation group according to the random number table,with 54 rats per group.Allen' s method was used for induction of experimental SCI.Animals in Tet group were given Tet (22.5 mg/kg) through the tail vein at 30 min,24 h and 48 h postinjury.The same volume of normal saline was given to other two groups.Spinal cord tissue samples were taken from the rats after injury to measure levels of tumor necrosis factor (TNF)-α,interleukin (IL)-1 β and IL-10,and tissues were examined with HE staining and Nestin immunohistochemistry staining.Results Levels of TNF-α,IL-1 βand IL-10 in injury and Tet groups increased compared to these in sham operation group at 6 h,12 h,1 d,3 d,5 d and 1 week postinjury (P ＜ 0.05).At the same time point,level of IL-10 was higher in Tet group than in injury group,but inversely for TNF-α and IL-1 β (P ＜ 0.05).More Nestin-positive cells were present in injury and Tet groups than in sham operation group at 1 d,3 d,1 week,2 week,3 week and 4 week postinjury (P ＜ 0.05).Additionally,more Nestin-positive cells were found in Tet group than in injury group at 1 d,3 d,1 week,2 week and 3 week postinjury (P ＜ 0.05).Conclusion Tet is effective to relieve inflammatory reaction,increase neural stem cell number and promote neurological recovery after SCI.

Objective To discuss the short-term curative effect and the safety of percutaneous vertebroplasty using high viscosity bone cement for the treatment of severe osteoporotic vertebral body compression fractures. Methods The clinical data of 100 patients with severe osteoporotic vertebral body compression fractures (compression degree>70%), who received percutaneous vertebroplasty by using high viscosity bone cement during the period from December 2010 to May 2013, were retrospectively analyzed. All the patients were followed up for at least one month. Both preoperative and postoperative visual analogue scale (VAS) and quality of life (QOL) scores, as well as the incidence of bone cement leakage, were recorded and the results were used to evaluate the curative effect and the safety of percutaneous vertebroplasty for severe osteoporotic vertebral body compression fractures. Results One week after the treatment, significant pain relief was obtained in 92 patients (92%), VAS scores decreased from preoperative (7.0 ±1.2) to postoperative (2.0±1.5), and QOL scores increased from preoperative (30±5.0) to postoperative (80±18.0);the differences were statistically significant (P<0.01). One month after the treatment, significant pain relief was seen in 91 patients (91%), VAS scores decreased from preoperative (7.0 ±1.2) to postoperative (1.5 ±1.0) and QOL scores increased from preoperative (30±5.0) to postoperative (80±15.0); the differences were statistically significant (P<0.01). No statistically significant differences in VAS scores and QOL scores existed between the data determined at one week after the treatment and the data determined at one month after the treatment (P>0.05). Leakage of bone cement was observed in 40 patients (40%), resulting no severe neurological symptoms; among the 40 patients, intervertebral disc leakage at above and below the vertebral body was detected in 28 patients (70%), vertebral anterior edge leakage was observed in 11 patients (27.5%) and vertebral posterior edge leakage was seen in one patient (2.5%). Conclusion For the treatment of severe osteoporotic vertebral body compression fractures, percutaneous vertebroplasty by using high viscosity bone cement is safe and effective.

Objective To investigate the clinical efficacy of asymmetric osteotomy via posterior adjacent vertebrae in the treatment of traumatic thoracolumbar kyphotic scoliotic deformity.Methods A retrospective case series study was conducted on the clinical data of 16 patients with traumatic thoracolumbar kyphotic scoliotic deformity admitted to our department from January 2012 to January 2017.There were 10 males and six females,aged (42.5 ±7.6) years (range,20-62 years).According to the location of injured vertebrae,there were two patients with T11,five with T12,six with L1,and three with L2,all of which had scoliosis deformity and obvious low back pain.All patients underwent asymmetric osteotomy via posterior adjacent vertebrae.The operation time and intraoperative bleeding were recorded.The imaging parameters such as kyphosis Cobb angle,scoliosis Cobb angle,distance between C7 plumbline and central sacral vertebral line (C7-CSVL),and distance between C7 plumbline and sagittal vertical axis (SVA) were measured before and after operation.At the same time,the visual analogue scale (VAS),Oswestry dysfunction index (ODI),and SRS-22 scale were used to evaluate the clinical efficacy.The AISA score was used to evaluate the neurological function recovery before and after operation.Results All patients were followed up for (26.3 ± 16.8) months (range,15-65 months).The operation time was (6.0 ± 1.4) hours (range,4.5-9.0 hours),and the intraoperative bleeding was (900.5 ± 360.8)ml (range,800-1600 ml).The kyphosis Cobb angle was improved from (70.3 ± 9.8) °before operation to (12.2 ± 2.9) ° after operation (P ＜ 0.01).The scoliosis Cobb angle was improved from (47.6 ± 11.6) ° before operation to (4.0 ± 0.9) ° after operation (P ＜ 0.01).The C7-CSVL decreased from preoperative (3.1 ±0.8)cm to postoperative (1.2 ±0.4)cm (P ＜0.01),and the SVA decreased from preoperative (5.0 ± 0.9) cm to postoperative (2.9 ± 0.5) cm (P ＜ 0.01).No severe complications such as spinal cord and nerve injury occurred.The VAS decreased from preoperative (6.8 ± 1.0) to (1.9 ± 0.9) points at the last follow up.The ODI decreased from (54.6 ± 4.2) ％ before operation to (8.1 ± 2.5) ％ at the last follow up.The SRS-22 score was increased from (64.6 ±7.5) points before operation to (87.4 ± 3.2) points at the last follow-up.In terms of the ASIA classification,two patients were improved from grade C to grade D after operation,and six patients were improved from grade D to grade E.Conclusion Asymmetric osteotomy via posterior adjacent vertebrae is safe and effective in the treatment of traumatic thoracolumbar scoliosis,with high correction rate of scoliosis and kyphosis at the same time.

Objective To explore the accuracy and clinical efficacy of advanced 3D printing navigation templates in assisting placement of atlantoaxial pedicle screw.Methods A retrospective analysis was carried out on 49 cases of patients with atlanto-axial vertebral fractures and dislocations between June 2013 and June 2016,and all of them were given posterior incision,reduction and internal fixation of atlantoaxial pedicle screw.The patients were divided into advanced 3D printing navigation template group (14 cases),early 3D printing navigation template group (16 cases),and routine pedicle screw placement group (19 cases).Atlantoaxial CT data of patients in advanced 3D printing navigation template group and early 3D printing navigation template group were input into Mimics 17.0,then advanced 3D printing navigation template group and early 3D printing navigation which were used in clinic surgery were designed and printed.The relationship between positions of pedicle screw with the pedicle and bone cortex in plain CT image was observed after operation.The quality of the screw position was assessed and the accuracy of three kinds of screwing methods was compared.The accuracy of the screwing angle was assessed by comparing with the differences between the preoperative designed channel inclination angle and postoperative actual screwing angle.Three groups were compared for differences between operation time,intraoperative blood loss,and scores of cervical nerve scale and visual analogue scale (VAS) of neck and shoulder pain by Japanese Orthopaedic Association (JOA).Results All 49 cases of patients successfully completed the surgery.Patients of the routine pedicle screw placement group,early 3D group and advanced 3D group correspond operation time for 141.2±20.7 min,112.5±12.1 min and 103.1±10.4 min,intraoperative blood loss for 314.0±81.4 ml,243.6±71.2 ml and 181.0+59.1 ml;total accuracy of screwing for 75.0％ (54/72),93.75 ％ (60/64) and 96.43 ％ (54/56).There were statistically significant differences among the routine group,3D group and advanced 3D group in the mentioned programs.There were no statistical differences between advanced 3D group and 3D group in the inclination angle and head tilt angle with the pre-designed values,while there was statistically significant difference between the routine group and the pre-designed value.The accuracy of the inclination angle and bead tilt angle screwing angle were obviously superior in the advanced 3D group and early 3D group to that of the routine group.There were statistically significant differences between preoperative with postoperative VAS scores and JOA scores in the same group,while there were no statistically significant differences among groups in JOA.But there was statistically significant difference between the routine group and the advanced 3D in VAS,and there was no statistically significant difference between the routine pedicle screw placement group and the early 3D in VAS.All three groups of patients had bony fusion of atlantoaxial vertebral body,without loosening,dislocation and fracture of the internal fixators.Conelusion Advanced 3D printing templates in assisting the surgical treatment for atlantoaxial fracture and dislocation can improve the accuracy of pedicle screwing and safety of the surgery,reduce the surgery risk,and obtain satisfied clinical curative effects.

BACKGROUND:Posterior atlantoaxial pedicle screw rod internal fixation is the main method for treating atlantoaxial dislocation,and the horizontal crosslink plays an important role in the antirotation ability of the internal fixation system.The new horizontal screw-screw crosslink can effectively overcome the disadvantages of traditional horizontal crosslink,such as inconvenient installation,impact on bone grafting bed,and potential spinal cord injury.However,the biomechanical properties of the new horizontal screw-screw crosslink with different installation modes are still unclear. OBJECTIVE:To investigate the biomechanical characteristics of new different installation modes of horizontal screw-screw crosslink in the C1-C2 pedicle screw-rod fixation and to provide a theoretical basis for optimal installation mode. METHODS:Six fresh human occipitocervical specimens were divided into the intact state group(group A),and the atlantoaxial instability model of type Ⅱ odontoid fracture was established based on the intact state group as the instability group(group B).The C1-C2 pedicle screw-rod fixation was performed on each specimen based on the instability group(group C).In group C,different installation modes of horizontal screw-screw crosslink were successively installed in each specimen,including upper transverse connection(two atlas screw tails)as group D,lower transverse connection(two axis screw tails)as group E,diagonal transverse connection(upper left and lower right for group F,lower left and upper right for group G),and cross transverse connection as group H.The specimen models were tested in order of flexion,extension,lateral flexion and lateral rotation on a three-dimensional motion machine,and the atlantoaxial range of motion of each group of specimens was obtained.Repeated measure analysis of variance was used to evaluate the biomechanical properties of each group. RESULTS AND CONCLUSION:(1)Under six states,the range of motion of groups A,C,D,E,F,G and H was smaller than that of group B,and there were statistically significant differences(P＜0.05).(2)In the flexion and extension states,there was no significant difference among the five types of horizontal screw-screw crosslink groups(P＞0.05).(3)In the left and right rotation directions,there were significant differences in D and E groups compared with F,G and H groups(P＜0.05);there were no significant differences between D and E groups,and F and G groups(P＞0.05),and there were no significant differences in F and G groups compared with H group(P＞0.05).(4)In conclusion,under flexion-extension states,the biomechanical stability of five types of horizontal screw-screw crosslink groups was similar,but under the rotation state,the stability of diagonal horizontal screw-screw crosslink group and cross horizontal screw-screw crosslink group was obviously better than that of transverse horizontal screw-screw crosslink group;however,the stability of diagonal horizontal screw-screw crosslink group is similar to the cross horizontal screw-screw crosslink group,so the former is more worthy of clinical recommendation.

Objective:To explore the effect of a new 5-point positioning point contact clamping fixation pedicle navigation template in treating cases of scoliosis and complex pedicle.Methods:From February 2019 to February 2023, 30 patients with scoliosis and complicated pedicle were admitted for orthopedic surgery. There were 11 males and 19 females, with an average age of 16.54±6.23 years (range 7 to 35 years). A total 60 cases treated before February 2019 were matched as a control group, including 23 males and 37 females, with an average age of 16.72±6.34 years (range 6 to 35 years). During the operation, the 5-point positioning point-contact clamping fixation pedicle navigation template was used to guide the screws. Screw placement time, screw placement bleeding volume, fluoroscopy frequency, manual redirection frequency, Rao pedicle screw placement classification and accuracy, screw placement complications, and main curve correction rate were recorded.Results:All the 30 cases from the study group successfully underwent the surgery with a total of 354 screws placed, while in the control group a total of 727 screws were placed in 60 cases. The surgery times and intraoperative bleeding volumes for the study group and the control group were 279.45±57.72 min vs. 292.54±58.87 min and 921.57±371.32 ml vs. 932.83±376.65 ml with significant differences ( t=-2.13, P=0.022; t=-1.87, P=0.024). The time for screw placement from the start of skin incision to the placement of the last screw and the bleeding volume during screw placement in the study group and the control group was 82.87±24.46 min vs. 97.53±25.56 min and 72.25±43.66 ml vs. 106.53±61.22 ml with significant differences ( t=-2.66, P=0.031; t=-2.32, P=0.027). The screw placement fluoroscopy frequencies and manual redirection frequencies in the study group and the control group were 4.21±1.11 times vs. 6.32±1.81 times and 0.47±0.64 times vs. 0.93±0.86 times with significant differences ( t=-4.66, P<0.001; t=-2.78, P=0.018). According to the Rao pedicle screw placement classification, the study group had 329 screws classified as level I, 19 screws as level II, and 6 screws as level III. In the control group, there were 669 screws classified as level I, 45 screws as level II, 12 screws as level III, and 1 screw as level IV with no significant difference (χ 2=4.26, P=0.547). The screw placement accuracy and the main curve correction rate in the study group and the study group was 98.31%±3.10% vs. 98.21%±4.92% and 57.85%±9.46% vs. 6.64%±9.22% with no significant differences ( t=0.88, P=0.384; t=0.42, P=0.663). No complications of nerve damage, major vascular injury, cerebrospinal fluid leakage, infection, or death happened during surgery or postoperatively. There were no complications of internal fixation displacement, loosening, or breakage. The outcomes of the patients were good with significantly improved appearance and trunk balance after surgery. Conclusion:The new navigation template provided an accurate and safe way of placing screws in treating various deformities of the lamina articular process without extensive and complete dissection of the posterior structure, leading to reduced fluoroscopy and operation time.

Objective:To investigate the safety and clinical efficacy of osteotomy after halo pelvic traction in severe scoliosis accompanied with split cord malformation.Methods:The clinical data of 14 patients with severe scoliosis accompanied with split cord malformation admitted to the Department of Spinal Surgery, Guizhou Orthopedic Hospital from August 2015 to August 2019 were retrospectively analyzed.There were 6 males and 8 females, aged (19.8±5.0) years (range:13 to 34 years). All patients received spinal orthopedic surgery after halo pelvic traction for 3 to 7 weeks.The data of traction time, height, Cobb angle in the main curved coronal plane and sagittal plane, lung function and nutritional status of the patient were collected before and after the treatment. Paired t test was used to compare the evaluation indexes. Results:The traction time of the 14 patients was (35.2±8.3)days (range:20 to 49 days), and the height of them increased from (156.7±7.6)cm (range:141 to 166 cm) before traction to (167.0±6.4)cm (range:154 to 177 cm) after traction（ t=-10.49， P<0.01）. The Cobb angle on the main curved coronal plane decreased from (117.4±17.2) ° (range: 91°to 176°) before traction to (56.4±8.1) ° (range:44°to 68°) after traction（ t=13.90， P<0.01）. The sagittal Cobb angle decreased from (92.5±11.6) ° (range:62°to 132°) before traction to (41.7±7.7) °(range:29°to 51°) after traction（ t=12.11， P<0.01）. No complications such as loosening of nailing and infection occurred during traction, and no decrease of nerve function occurred. Nine patients underwent single segment acromial transpedicle osteotomy and five underwent double segment adjacent asymmetric shortening osteotomy. None of the patients underwent longitudinal fracture resection. The lung function and nutritional status were improved after traction and surgery(all P<0.01). Postoperative follow-up was (22.5±9.1)months (range:12 to 36 months). At the last follow-up, the coronal Cobb angle was (56.3±7.1) °, and the sagittal Cobb angle was (37.7±6.5) °, showing no statistically significant difference from the angle after traction( t=0.16, P=0.88; t=2.28, P=0.32). There was no loss of orthopedic angle. None of the patients had internal fixation displacement, loosening or fracture. Conclusion:The treatment of severe scoliosis with accompanied with split cord malformation by halo pelvic traction is safe and effective, which is worthy of further confirmation by large sample study.