Objective To establish HPLC method for determination of the related substances in gatifloxacin mesylate for injection.Methods Determination was performed with C18(150mm?4.6mm,5?m)as the chromatographic column.The mobile phase was consisted of phosphoric acid-acetonitrile(82:18)with a flow rate at 1.0ml/min.The column temperature was 30℃ and the detection wavelength was 325nm.Results Good linear relation was achieved when the gatifloxacin concentration was at the range of 78.8～630.4?g/ml(r=0.9999).All the chief peaks of gatifloxacin and those of their related substances were well isolated in all the specificity tests.the detective limit was 0.038?g/ml(S/N=4).the total peak area of therelated substances of all batches of samples was not more 1% of the peak area of their solutions.Conclusions This method is simple,accurate and stable.

Objective To establish the method for the determination of gatifloxacin mesylate for injection.Methods The chromatographic condition was as follows:Determination was performed with C18(150mm?4.6mm,5?m)as the chromatographic column.The mobile phase was consisted of phosphoric acid-acetonitrile(82:18)with a flow rate at 1.0 ml/min.The column temperature was 30℃ and the detection wavelength was 325nm.Results Good linear relation was achieved when the gatifloxacin concentration was at the range of 78.8～630.4?g/ml(r=0.9999).At the concentration of 80% 、100%、120%,the mean recovery were 99.45%(RSD 1.29%,n=3)、99.24%(RSD 0.47%,n=3)、99.81%(RSD 0.75%,n=3).,respectively.Conclusion The method is accurate with a good reproducibility and can be used as a quantitative analys for preparation.

Objective:To explore the isolation,culture,proliferation and fluor-labelling of the fetal bone mesenchymal stem cell (BMSCs),and their biological character. Methods:Limb bone marrow samples from fetus aged 4 to 5 months were obtained, BMSCs were isolated by Ficoll centrifugalization and adherence screening method,and then cultured,proliferated to the 12th generation in vitro. The growth curve,cell cycle,phenotype,enzymatic activity,glycogen and the DAPI fluor-labelling of BMSCs were observed. Results:(1)Major BMSCs were fusiform, arranged as whirlpool. After the 12th generation,BMSCs presented the signs of senility. The subcultured cells proliferated faster than primary cells. (2)The 3rd and 8th generation of BMSCs expressed CD29,D71,but not CD34,HLA-DR;the G0,G1 period cells were 93.73%,and the S,M,G2 period cells were 6.27%. (3)The 5th generation cells were positive of nonspecific esterase and glycogen,but weak positive of alkaline phosphatase. (4)DAPI labeled BMSCs grew normaly,and the marking rate of BMSCs was 100%,but decreased gradually,and only 15% cells were labbelled for the 3th week. Conclusion:The acquired fetal BMSCs have the character of MSCs. The DAPI labeling is a modus operandi for the short period tracing BMSCs.

Animals ; Humans ; Phytotherapy ; Rheumatic Diseases ; drug therapy ; Stilbenes ; therapeutic use

BACKGROUND: BK viral infection after renal transplantation influences the prognosis of BK virus-associated nephropathy in renal transplant recipients. The disease has been widely studied in foreign countries.OBJECTIVE: This study was designed to sum up the diagnosis and treatment of BK virus-associated nephropathy after renal transplantation.RETRIVAL STRATEGY: Using the terms "renal transplantation; BK virus" in the English language, manuscripts responsible for BK virus-associated nephropathy after renal transplantation that were published from January 2000 to January 2007 were retrieved from the PubMed database. A total of 206 manuscripts were obtained and primarily screened. Inclusion criteria: studies addressing BK virus-associated nephropathy after renal transplantation. Exclusion criteria: repetitive studies.LITERATURE EVALUATION: The included manuscripts were primarily from PubMed database. Manuscripts were primarily original and review studies.DATA SYNTHESIS: BK virus can be found in the urine of 3%-40% of adult renal transplant recipients. BK virus reactivation rate is very high, but the histological manifestations of BK virus associated nephropathy are found only in a small number of renal transplant recipients. The prognosis of BK virus associated nephropathy is very poor. BK virus associated nephropathy develops into renal failure, leading to transplant loss, in 30%-50% patients. BK virus-caused renal transplant disease must be diagnosed according to histological manifestations. Viral infection should be primarily confirmed, but serological measurements have no predominant effects. Electron microscopy should be involved in the assessment of renal graft biopsy, especially when renal failure factors are unknown, as through the use of electron microscope, viral particles in the nucleus, cytoplasm and outside of the cells could be detectable. Viral antigen in the urine sample of patients with BK viruria can be detected by nucleic acid hybridization method, immunofluorescence, and ELISA. Cidofovir is an effective medicine for treatment of BK virus-associated nephropathy, but its potential nephrotoxicity, proper dose, pharmacokinetics, safety, tolerance, anti-BK viral activities have not been confirmed. So fresher study should be required for aforementioned uncertainties.CONCLUSION: BK virus-associated nephropathy has poor prognosis and should be diagnosed according to histological examinations. BK virus-associated nephropathy has been treated primarily by symptomatic supportive treatment and reducing the dose of immunosuppressive agents.

BACKGROUND:Diagnosis of pelvic and acetabular fractures is difficult with a high misdiagnosis rate. It is necessary to diagnose pelvic and acetabular fractures rapidly and accurately. And patients suffer great injury, blood loss, from traditional open pelvis and acetabulum surgery, often complicated by neurovascular injury. Correct positioning and placement of internal fixator can reduce surgical complications.
OBJECTIVE:To explore the new progress of three-dimensional reconstruction of pelvic and acetabular fractures in order to promote its clinical application.
METHODS:A computer-based online search of PubMed database, CNKI database and Vip database between September 1996 and October 2013 was performed to search related articles using the key words of“3D, three dimensional reconstruction, pelvic fracture, acetabular fracture”in English and Chinese, respectively. The duplicate research or Meta analysis articles were eliminated. Final y, 41 articles were enrol ed for further analysis.
RESULTS AND CONCLUSION:Through a three-dimensional reconstruction using a variety of post-processing techniques, such as multi-planar reformation, maximum intensity projection, shaded surface display and volume rendering, we can get high quality images at any angle. Various post-processing techniques interact with each other that can reduce missed diagnosis rate and misdiagnosis of pelvic and acetabular fractures. Moreover, three-dimensional reconstruction techniques can be used to design surgical approach, guide surgeon’s surgical program designed to simulate surgical procedures, reduce the complications caused by the dislocation of internal fixation, and reduce the surgical risk. Three-dimensional reconstruction is also used for postoperative fol ow-up review of fracture recovery.

10.3969/j.issn.2095-4344.2013.23.025

BACKGROUND:Sclerostin can negatively regulate the bone metabolism, and the sclerostin monoclonal
antibody can antagonize the negative regulation effect, inhibit bone resorption and promote bone formation. OBJECTIVE:To explore the mechanism and application progress of sclerostin monoclonal antibody in the treatment of osteoporosis.
METHODS:An online search of PubMed database, CNKI database, VIP database and Wanfang database
between May 2005 and May 2013 was performed by the first author to search the related articles with the key words of“osteoporosis, antibody, sclerostin, Wnt, SOST”in both English and Chinese. Articles related to
sclerostin monoclonal antibody were included. For the articles in the same field, those published earlier or in the authorized journals were preferred.
RESULTS AND CONCLUSION:A total of 170 articles were obtained after initial search, and final y 54 articles related to sclerostin monoclonal antibody were included for review according to the inclusion criteria. The
sclerostin can block Wnt pathway through combining with low-density lipoprotein receptor-related protein 5/6, thus inhibiting the differentiation and mineralization of osteoblasts. By specifical y binding to sclerostin, the
sclerosin monoclonal antibody can indirectly promote bone formation and restrain bone absorption which has great significance in the treatment of osteoporosis. Meanwhile, compared with the other treatment method, the specific targeting of sclerostin and the binding specificity of sclerostin monoclonal antibody provide application advantages for the treatment of osteoporosis.

Objective: A reversed phase HPLC method was described for determination of prim O glucosylcimifugin and 4′ O ? D glucosyl 5 O methylvisamminol in Ganmaoqingre Granules. Methods:The sample was separated on ODS column with mobile phase of methanol 40 mmol?L -1 sodium acetate pH 6.9 (35∶65) for prim O glucosylcimifugin and H 2O methanol THF(62∶38∶1) for 4′ O ? glucosyl 5 O methylvisamminol. The flow rate was 0.8 mL?min -1 , and the detection was set at 254 nm. Results: The calibration curves were linear in the range of 0.72 ?g?mL -1 ～6.5?g?mL -1 for prim O glucosylcimifugin and 0.92?g?mL -1 ～16.5?g?mL -1 for 4′ O ? D glucosyl 5 O methylvisamminol( r =0.9999). The average recovery was 100.3% and 94.7%. The content of prim O glucosylcimifugin and 4′ O ? D glucosyl 5 O methylvisamminol in Ganmaoqingre Granules was 0.133 mg?g -1 and 0.167 mg?g -1 , respectively. Conclusion: The method is fast and specific for both constitutents of Ganmaoqingre Granules.

BACKGROUND:Three-dimensional printing technique has been applied in medical fields since it was invented in the end of 20th century. Recently it has been widely used in manufacturing scaffolds for bone tissue engineering. OBJECTIVE:To review the basic concept of the scaffold for bone tissue engineering, the basic requirements for three-dimensional printing technique in scaffold engineering, different materials used in bone tissue engineering, the advantages and limitations of three-dimensional printing technique and the outlook of three-dimensional printing technique applied in manufacturing scaffold for bone tissue engineering. METHODS: The first author did a computer-aided retrieval of the MEDLINE database, Science Direct database, CNKI database, and CQVIP database for articles relevant to three-dimensional printing technique used in manufacturing scaffolds for bone tissue engineering published between January 1990 and February 2015. The key words were three-dimensional printing, tissue engineering, rapid prototyping technology, scaffold, materials in English and Chinese, respectively. Repetitive studies were excluded, and 33 of 52 related literatures were adopted in result analysis. RESULTS AND CONCLUSION: Three-dimensional printing technique has many advantages such as high resolution, high velocity and the freedom to build unlimited geometries. There are some requirements for the powder and binder used to construct bone tissue engineering scaffolds using the three-dimensional printing technique, such as the flowability, stability and wettability. A wide range of materials can be used: synthetic and natural polymers, ceramics, as wel as composites of the aforementioned. Various kinds of powder take responsibility of different features of scaffolds, resulting from the advantages and disadvantages of different materials. Although this technique has some limitations such as high cost and the difficulty of commercial production, its application stil has a bright future.