This paper aims to establish a new method of calibration and positioning in quantitative analysis of multicomponents by single marker (QAMS), using Shuanghuanglian oral liquid as the research object. Establishing relative correction factors with reference chlorogenic acid to other 11 active components (neochlorogenic acid, cryptochlorogenic acid, cafferic acid, forsythoside A, scutellarin, isochlorogenic acid B, isochlorogenic acid A, isochlorogenic acid C, baicalin and phillyrin wogonoside) in Shuanghuanglian oral liquid by 3 correction methods (multipoint correction, slope correction and quantitative factor correction). At the same time chromatographic peak was positioned by linear regression method. Only one standard uas used to determine the content of 12 components in Shuanghuanglian oral liquid, in stead of needing too many reference substance in quality control. The results showed that within the linear ranges, no significant differences were found in the quantitative results of 12 active constituents in 3 batches of Shuanghuanglian oral liquid determined by 3 correction methods and external standard method (ESM) or standard curve method (SCM). And this method is simpler and quicker than literature methods. The results were accurate and reliable, and had good reproducibility. While the positioning chromatographic peaks by linear regression method was more accurate than relative retention time in literature. The slope and the quantitative factor correction controlling the quality of Chinese traditional medicine is feasible and accurate.

Objective To investigate the importance for early operation in severe acute pancreatitis (SAP) treatment. Method We retrospectively compared the mortality of 37 cases of SAP gradeⅡthat were treated by non-operative and early operative methods.Result The mortality of the nonoperative group was significantly higher than operative group (88.9% to 42.1%). Conclusion In the early course of SAP, nonoperative treatment should not overemphasized and,operation should be considered as a therapeutic method according to different pathophysiological changes.

Objective To explore the neuroprotective mechanism of mild hypothermia by studying the effect of mild hypothermia on neuronal apoptosis after transient global cerebral ischemia in rats.Methods A model of transient global cerebral ischemia was made by bilateral common carotid artery occlusion and hypotension in rats. The neuronal demage in the CA 1 section of the hippocampus after cerebral ischemia was observed by nissel body stain mothed;apoptosis was detected by in situ end-labeling of fragmented DNA using the terminal deoxynucleotidyl transferase reaction (TUNEL) and the electrical microscope.Results The hippocampal CA 1 section neurons in normothermic ischemic group were significantly deficit as compared with the false operative group in mild hypothermic ischemic group (P

Objective To investigate the relationship between monocyte chemoattractant protein-1 (MCP-1) gene -2518G/A polymorphism and cerebral infarction(CI) of Han population in Chinese Hunan district.Methods The -2518G/A polymorphism in MCP-1 gene was detected by polymerase chain reaction-restriction fragment length polymorphism analysis (PCR-RFLP) and DNA sequencing in 162 patients with CI (CI group) and 150 normal controls (NC group). The serum level of MCP-1 in the two groups was determined by enzyme-linked immunosorbent assay (ELISA).Results In CI group, genotypic frequency of GG was 39.5%, GA was 37.0%, and AA was 23.5%. The allele frequency of G was 58.0% and A was 42.0%. In NC group, genotypic frequency of GG was 27.3%, GA was 39.3%, and AA was 33.4%. The allele frequency of G was 47.0% and A was 53.0%. The frequencies of MCP-1 -2518GG genetype and G allele in CI group were significantly higher than those in CI group (all P

Heat shock protein (HSP) is a family of poly-peptdic-proteins with many members. A great deal of data show that heat shock proteins act as molecular chaperones to regulate protein folding, translocation and assembly, it can combine with other peptidic-proteins existing in cells and participating in the process of anti-damage, repair and thermotolerance of cells. In recent years, with the progress of research in this field, it has arisen extensive attentions of the application of heat shock proteins in etiology , therapeutics and prevention of tumor. HSP becomes one of the most active research field.

OBJECTIVE: To explore the prevalence of work-related low back musculoskeletal disorders(WMSDs) among electric welders in an automobile factory and to analyze its individual influence factors. METHODS: A total of 754 electric welders with a service length ≥1.0 years from an automobile factory in Shiyan City were selected using judgment sampling method. The Musculoskeletal Disorders Standard Questionnaire was used to collect the information of low back WMSDs. RESULTS: The annual prevalence of low back WMSDs among electric welders was 65.9%(497/754). The prevalence in females was higher than that in males(78.4% vs 63.1%, P<0.01). The prevalence of WMSDs had a rising tendency with age, educational level and service length(P<0.01). The multivariate logistic regression analysis results showed that the risk factors for low back WMSDs were age, gender, and educational level(P<0.05).CONCLUSION: The prevalence of low back WMSDs of electric welders in the automobile factory is high. Gender, age and educational level are the main risk factors affecting low back WMSDs.

Tissue engineering is a discipline involving both materials science, engineering and life science. It has found successful application in Bioartificial renal tubule assist device RAD which is still under development. Experiments have proved that RAD can serve as renal tubule to perform its transport, metabolic and endocrine functions in patients with acute or chronic renal failure.
Animals ; Bioartificial Organs ; Cell Transplantation ; Cells, Cultured ; Kidney Tubules ; cytology ; Kidneys, Artificial ; Renal Insufficiency ; therapy ; Renal Replacement Therapy ; instrumentation ; Swine ; Tissue Engineering ; methods

【Objective】 To analyze the independent influencing factors of repeated extracorporeal shock wave lithotripsy (ESWL) in the treatment of upper urinary calculi (UUC), based on which a nomogram model was established to predict the efficacy. 【Methods】 Clinical and imaging data of 203 patients receiving repeated ESWL during Jan.2020 and Dec.2022 were collected, including 117 cases in the successful group and 86 cases in the unsuccessful group.The patients’ age and sex, stone volume (SV), surface area (SA), skin-to-site distance (SSD), maximum CT value, mean stone density (MSD), and stone heterogeneity index (SHI) were compared between the two groups.The independent predictors were analyzed with logistic regression and the meaningful variables (P<0.05) were used to establish a nomogram.The efficacy of the model was evaluated using receiver operating characteristic (ROC) curve and decreasing curve analysis (DCA).Internal validation was also performed. 【Results】 Stepwise regression showed that SV, SSD, MSD and SHI were independent influencing factors (P<0.05).The area under the ROC curve (AUC), optimal threshold, sensitivity and specificity were 0.793 (95%CI: 0.674-0.911), 0.619, 77.1% and 74.0%, respectively.The DCA curve was above two extreme curves.Hosmer-Lemeshow test and calibration curve showed that the nomogram had a good fitting degree (χ²=5.526, P=0.489), and the correction C-index was 0.746. 【Conclusion】 SV, SSD, MSD and SHI are independent predictors of the efficacy of repeated ESWL in the treatment of UUC.The nomogram established based on the above indicators has good predictive efficiency and clinical applicability.

Objective: To investigate the influence of individual factors and labor organization on the prevalence of neck pain (hereinafter referred to as neck pain) in automotive assemblers, and to provide a basis for enterprises to optimize neck pain interventions. Methods: A cluster random sampling method was taken in January 2021, at an automobile manufacturing plant in Shiyan, 656 assemblers with ≥1.0 years of service were selected, the "Musculoskeletal Disorder Questionnaire" was used to investigate the incidence and influencing factors of neck pain. Pearson χ(2) test or trend χ(2) test was used to compare the data rates. The influencing factors of neck pain were analyzed by multivariate logistic regression. Results: The prevalence rate of neck pain (hereinafter referred to as the prevalence rate of neck pain) of automobile assemblers within one year was 53.94% (342/634) . The prevalence of neck pain in women was higher than that in men (69.1% vs 48.6%, P<0.01) . The prevalence of neck pain was related to length of service, self-assessment of fatigue, working hours per week, working in the same workshop, rest days per shift, and accumulated rest time per shift (P<0.05) . Multivariate logistic regression analysis showed that the risk of neck pain in women was 2.434 times higher than that in men; The risk of neck pain increased by 18.9% for each hour of work per week; Rest during work was a protective factor for neck pain. The number of rest per shift increased and the risk of neck pain decreased (r=0.405, 0.311, 0.302, 95%CI=0.205~0.803, 0.169~0.572, 0.142~0.642, P<0.05) . Conclusion: The annual prevalence of neck pain was higher in automobile assemblers. Enterprises should fully consider the influencing factors such as gender, working hours per week and the number of breaks when arranging production.
Female ; Humans ; Male ; Musculoskeletal Diseases/epidemiology* ; Neck Pain/epidemiology* ; Occupational Diseases/epidemiology* ; Prevalence ; Risk Factors ; Surveys and Questionnaires

Objective To investigate the influence of individual factors and labor organization factors on work-related musculoskeletal disorders (WMSDs) in automobile manufacturing workers, and to provide a scientific basis for the prevention and treatment of WMSDs in automobile manufacturing workers. Methods In April 2020, 5564 workers in an automobile factory were selected by cluster sampling method. The prevalence of WMSDs was investigated by using the Musculoskeletal Disorders Questionnaire, and the influence of individual factors and labor organization factors on WMSDs was investigated by using generalized estimation equation. Results The prevalence rate of WMSDs was 79.00% (4396/5564), and the prevalence rate of multisite WMSDs was 67.95% (3781/5564). The analysis of generalized estimation equation showed that doing the same job every day (OR= 1.478, P < 0.05), age ≥40 years (OR=1.416, P< 0.05), personnel shortage (OR= 1.356, P < 0.05), and work length of 6～10 years and 11～15 years (OR= 1.349, P< 0.05) were the main risk factors for WMSDs in automobile manufacturing workers. Shift work and working time > 40 hours per week increased the risk of WMSDs (P< 0.05). Male and adequate rest time were protective factors for WMSDs. The job correlation matrix showed that WMSDs in most parts had a positive correlation. Conclusions The prevalence of multisite WMSDs of workers in automobile manufacturing industry is high, and unreasonable labor organization is the main risk factor of WMSDs. Appropriate work breaks can effectively reduce the risk of WMSDs, and effective intervention measures should be carried out to prevent the occurrence of WMSDs in workers in automobile manufacturing industry. The generalized estimation equation can better analyze the influencing factors of WMSDs.