The object of this study is to preparate the berberine hydrochloride (BBH) resin compound with taste masking effect. We took the BBH as the model drug and Amberlite IRP69 as the drug carriers, uncovered the curve of solubility of BBH in different cosolvent with a certain range of temperature, and then used it to calculate the parameters during the preparation of the complex such as adding quantity of BBH and the reaction temperature. Afterwards, the characteristic and in vitro release experiments were studied to verify the formation and predict the in vivo release behavior of the complex. The results showed that in the condition of using 60% ethanol as a cosolvent and stirring at 50 ℃ for 1 h, the drug loading and drug availability of the complex are at about 35% and 64%, respectively, and has a better taste-masking effect. In this study, a method was provided for preparing a taste-masking preparation of BBH.

OBJECTIVETo evaluate preliminarily the efficacy on functional constipation treated with electroacupuncture of different acupoint prescriptions.

METHODSOne hundred and four patients were randomized into a front-mu and back-shu points group (19 cases), a he-sea points group (34 cases), a he-sea, front-mu and back-shu points group (26 cases) and a western medication control group (25 cases). In the front-mu and back-shu points group, electroacupuncture was applied at bilateral Tianshu (ST 25) and Dachangshu (BL 25). In the he-sea points group, electroacupuncture was applied at bilateral Quchi (LI 11) and Shangjuxu (ST 37). In the he-sea, front-mu and back-shu points group, electroacupuncture was applied at unilateral Tianshu (ST 25), Dachangshu (BL 25), Quchi (LI 11) and Shangjuxu (ST 37). In the three groups above, the treatment was given 5 times a week in the first two weeks and 3 times a week in the next two weeks. In the western medication control group, mosapride citrate tablets were prescribed for oral administration, 1 table (5 mg) each time, 3 times a day, continuously for 4 weeks. The period of research was 9 weeks, including 1 week for baseline evaluation, 4 weeks for treatment and 4 weeks for follow-up. The weekly defecation frequency was taken as primary index, while the defecation difficulty and life quality score were taken as the secondary indices for the efficacy evaluation after treatment and in follow-up.

RESULTSAccording to the intention-to-treat (ITT) analytic principle, 104 cases were all enrolled in the final analysis. (1) After treatment, the weekly frequency of defecation was all increased significantly in the four groups (P < 0.05, P < 0.01). The efficacy of the three electroacupuncture groups was similar to that of western medication control group (P > 0.05). In follow-up, the increasing effect on the weekly frequency of defecation was maintained in the he-sea points group (P < 0.01), superior to the front-mu and back-shu points group and the western medication control group (P < 0.05, P < 0.01); the weekly frequency of defecation was not improved in the rest three groups (P > 0.05). (2) After treatment, defecation difficulty was relieved in the he-sea points group, the he-sea, front-mu and back-shu points group and the western medication control group (P < 0.05, P < 0.01). In follow-up, the improvements were still significant in the he-sea points group and the he-sea, front-mu and back-shu points group (both P < 0.01). (3) After treatment, the life quality score was significantly improved in the patients of the he-sea points group (P < 0.05). The difference was not significant in the rest three groups as compared with that before treatment (all P > 0.05).

CONCLUSIONThe weekly frequency of defecation is increased effectively after treatment in the three electroacupuncture groups and the efficacy is similar to mosapride citrate tablets. The bilateral Quchi (LI 11) and Shangjuxu (ST 37) in he-sea acupoints increase significantly the weekly frequency of defecation, relieve defecation difficulty and improve life quality. Acupuncture efficacy is sustained for 4 weeks. This acupoints prescription is the best in the treatment of functional constipation.

Acupuncture Points ; Adult ; Aged ; Constipation ; physiopathology ; therapy ; Defecation ; Electroacupuncture ; Female ; Humans ; Male ; Middle Aged ; Treatment Outcome ; Young Adult

Traditional processes are mostly adopted in traditional Chinese medicine (TCM) preparation production and the quality of products is mostly controlled by terminal. Potential problems of the production in the process are unpredictable and is relied on experience in most cases. Therefore, it is hard to find the key points affecting the preparation process and quality control. A pattern of research and development of traditional Chinese medicine preparation process based on the idea of Quality by Design (QbD) was proposed after introducing the latest research achievement. Basic theories of micromeritics and rheology were used to characterize the physical property of TCM raw material. TCM preparation process was designed in a more scientific and rational way by studying the correlation among enhancing physical property of raw material, preparation process and product quality of preparation. So factors affecting the quality of TCM production would be found out and problems that might occur in the pilot process could be predicted. It would be a foundation for the R&D and production of TCM preparation as well as support for the "process control" of TCMIs gradually realized in the future.
Drug Compounding ; methods ; standards ; Drugs, Chinese Herbal ; chemistry ; isolation & purification ; standards ; Humans ; Medicine, Chinese Traditional ; standards ; trends ; Quality Control ; Research ; standards ; trends ; Research Design ; standards ; Technology, Pharmaceutical ; instrumentation ; methods ; standards

In this paper, microcrystalline cellulose WJ101 was used as a model material to investigate the effect of various process parameters on granule yield and friability after dry granulation with a single factor and the effect of comprehensive inspection process parameters on the effect of granule yield and friability, then the correlation between process parameters and granule quality was established. The regress equation was established between process parameters and granule yield and friability by multiple regression analysis, the affecting the order of the size of the order of the process parameters on granule yield and friability was: rollers speed > rollers pressure > speed of horizontal feed. Granule yield was positively correlated with pressure and speed of horizontal feed and negatively correlated rollers speed, while friability was on the contrary. By comparison, fitted value and real value, fitted and real value are basically the same of no significant differences (P > 0.05) and with high precision and reliability.
Cellulose ; chemistry ; Drug Compounding ; methods ; Hardness ; Models, Chemical ; Particle Size ; Regression Analysis ; Technology, Pharmaceutical ; methods

Objective To observe the clinical efficacy of acupuncture at the nine acupoints on nape in treating vertebrobasilar ischemia (VBI). Methods Totally 100 VBI patients were randomized into a treatment group and a control group, 50 in each group. The treatment group was intervened by acupuncture at Fengfu (GV 16), Fengchi (GB 20), Wangu (GB 12), Tianzhu (BL 10), and Jiaji (EX-B 2, C3);while the control group was by oral administration of Nimodipine tablets. The parameters in Transcranial Doppler (TCD) and Dizziness Assessment Rating Scale (ADRS) were observed before and after intervention, and the clinical efficacies were compared. Results The TCD parameters were significantly changed in the treatment group after intervention (P<0.05). The TCD parameters [Vs (RVA), Vd (BA, LVA), Vm (BA, RVA), PI (BA)] were significantly changed in the control group after intervention (P<0.05). After intervention, there were significant differences in comparing the TCD parameters [Vs (BA, LVA, RVA), Vd (BA, RVA), Vm (BA, LVA), PI (BA)] between the two groups (P<0.05). The DARS average scores were significantly changed in both groups after 7-day treatment (P<0.01). The DARS average scores after the whole intervention were significantly different from that after 7-day treatment in both groups (P<0.01). There were significant differences in comparing the DARS average scores between the two groups after 7-day intervention and after the whole intervention (P<0.01). The recovery-markedly effective rate and total effective rate were respectively 76.0%and 98.0%in the treatment group versus 44.0%and 96.0%in the control group, and there was a significant difference in comparing the recovery-markedly effective rate (P<0.05). Conclusions Acupuncture at the nine nape acupoints is an effective method in treating VBI.

Graft Rejection ; Humans ; Liver Transplantation

This study is to investigate the effect of the effective components group of Xiaoshuantongluo (XECG) on neuronal injury induced by oxygen-glucose deprivation (OGD) in primary cortical cultures isolated from SD rat cortex at day 3 and the possible mechanism. Cells were divided into control group, OGD model group and XECG group (1, 3 and 10 mg x L(-1)). The cell viability was assessed with MTT assay and the LDH release rate was measured by enzyme label kit. The cell apoptosis was analyzed using Hoechst staining. RT-PCR was applied to detect the mRNA levels of JAK2 and STAT3. Western blotting was used to detect the expressions of Bcl-2, Bax, p-JAK2 and p-STAT3 proteins. Results showed that XECG resulted in an obvious resistance to oxygen-glucose deprivation-induced cell apoptosis and decrement of cell viability, decrease the cell LDH release rate. XECG could adjust the expression of Bcl-2 and Bax proteins and increase Bcl-2/Bax ratio, up-regulate the expression of p-JAK2 and p-STAT3. In conclusion, XECG could protect against the neuronal injury cells exposed to OGD, which may be relevant to the promotion of JAK2/STAT3 signaling pathway, and impact the expression of Bax and Bcl-2.
Animals ; Apoptosis ; Cell Survival ; Cells, Cultured ; Drugs, Chinese Herbal ; pharmacology ; Glucose ; Janus Kinase 2 ; metabolism ; Neurons ; drug effects ; metabolism ; Neuroprotective Agents ; pharmacology ; Oxygen ; Proto-Oncogene Proteins c-bcl-2 ; metabolism ; Rats ; STAT3 Transcription Factor ; metabolism ; Signal Transduction ; bcl-2-Associated X Protein ; metabolism

Ultrasound attenuation has been measured during HIFU propagation in fresh ox liver at different frequency using a radiation force method. The acoustic radiation force was measured before and after the prepared ox liver of various thicknesses (20 mm, 40 mm, 60 mm, 80 mm) which were put into degassed water and exposed to different transducer surface output acoustic powers at a room temperature (20 degrees C) with therapeutic transducers of various frequencies, and then the ultrasound attenuation coefficient was calculated. With the use of therapeutic transducer 4, the focus of the ultrasonic beam was set to be 20 mm, 40 mm or 60 mm deep into the tissue surface using B-mode ultrasound guidance. A single exposure was performed with focal intensity ISATA = 22.0 x 10(3) W/cm2(ISATA, in degassed water) and exposure time 5 sec. The sample was cut after treatment to measure the volume of coagulative necrosis. For a specific therapeutic transducer, the radiation force ratio in liver of constant thickness is independent of the transducer surface sound intensity and the area of the ultrasound window at the sample front face. The radiation force ratio and the volume of coagulative necrosis induced by HIFU are plotted as the functions of sample thickness (or exposed depth), in which it can be seen that these two parameters have the same exponential dependence on sample thickness. The ultrasound attenuation coefficient alpha in ox liver is shown to be frequency f dependent, it almost linearly increases with frequency t. This work shows that such a study is feasible, and offers experimental data that will be useful for future HIFU dosage studies.
Animals ; Cattle ; In Vitro Techniques ; Liver ; pathology ; physiology ; Radiation ; Transducers ; Ultrasonic Therapy ; methods ; Ultrasonics

Brain Neoplasms ; Germinoma ; Humans ; Pineal Gland

OBJECTIVEThe objective of this study is to investigate the influence of mechanical properties and sintering performance by adding 5% weight percentage aids to nano-compound zirconia toughened alumina (ZTA) ceramics.

METHODSMicrometer Al2O3 and nanometer ZrO2 (quality ratio 4:1) were used to get 55% volume percentage slurry. Magnesium oxide and titanium oxide were taken as aids which were 5% weight percentage of the Al2O3 and ZrO2 powder. Five groups (number 0, 1, 2, 3, 4 group) were divided according to different proportion of aids. After gel-casting, the porcelain pieces were sintered at 1150, 1200, 1300, 1400, 1450, 1500, 1600 degrees C for 2 hours. Static three-point flexure strength, line shrinkage, relative density were measured and scanning electron microscopy (SEM) was used to observe section.

RESULTSNumber 1 (MgO 1%, TiO2 4%) group had the highest bending strength. It was (401.78+/-19.50) MPa after sintering at 1600 degrees C for 2 hours and was higher than 0 group (380.64+/-44.50) MPa. Bending strength became lower than 0 group when MgO was more than 2% or more than that weight percentage of ZTA powder. When MgO content was higher than 2% or more than that weight percentage, there was no difference in relative density raising rate between each sintering assistants groups. When the sintering temperature was higher than 1200 degrees C, all groups showed obvious line-shrinkage and the groups which contained sintering assistants were all was higher than 0 group.

CONCLUSIONAdding MgO and TiO2 aids from 1% to 4% weight percentage of ZTA will promote fritting and increase ZTA nano-compound ceramics mechanical properties. Adding 2% MgO aids or more than that weight percent will has no obvious help to increase the relative density raising rate of ZTA nano-compound ceramics and will degrade the mechanical properties of ZTA nano-compound ceramics.

Aluminum Oxide ; Dental Porcelain ; Microscopy, Electron, Scanning ; Temperature ; Titanium ; Zirconium