Objective To observe the effect of the different bore diameter membranes on technological parameters of Radix Polygoni Multiflori Granula and to optimize the process of membrane filtration.Methods Three different membranes were tested under different parameters of operation to observe the changes in membrane flux and the content of effective components by Radix Polygoni Multiflori Granula.Results The membrane(50 nm)had the great flux,the transfering rate of stilbene glucoside was the highest;The optimum conditions:the operation differential pressure was 0.8-1.2 MPa;The operation temperature was 50-60 ℃;the membrane surface flow rate was 3.0 m/s.When the volume of filtration solution was condensed to 1/10 of former,entering the same volume deionized water into it,and when the effective components transfering rate reached 80%,the filtration was finished.Using the strong acid and strong alkali to wash it in turn,the flux could revive above 90%.Conclusion It can be obtained a good result that adopts the technology of ceramic membranes microfiltration to refine Radix Polygoni Multiflori Granula.This can provide the foundation for the application of ceramic membrane microfiltration in the refinement of water extraction of other Chinese materia medica.

AIM:To observe the influence of the different bore diameter ceramic membranes on the processing parameters of Jinlida Granules(Radix et Rhizoma Salviae miltiorrhizae,Radix Sophorae flavescentis,Rhizoma Polygonati,etc.) and optimize the process of membrane filtration. METHODS: Three different membranes were tested to observe the changes in membrane flux and the content of effective components by Jinlida Granules extract. RESULTS: The 50 nm membrane had the great flux,the transfer rates of matrine and salvianolic acid were the highest;The optimum conditions: the operation differential pressure was 0.08～0.12MPa;the operation temperature was 50～60℃;the membrane surface flow rate was 3.0 m/s.When the volume of filtration solution was condensed to one tenth,adding the same volume aeionized water,and the effective components transfer rate reached 80%.Using the strong acid and strong alkali to wash it in turn,the flux can revivify above 90%. CONCLUSION: Applying the ceramic membrane to ultrafiltrate Jinlida Granule is good and useful to herb purification.

OBJECTIVE: To establish a RP-HPLC method for the determination of the content of hesperidin in Yangweishu tablets.METHODS: The samples were separated on octadecyl silane bonded gel silica column(150 mm?4.6 mm,5 ?m) with the mobile phase consisted of methanol-7% acetic acid solution(32∶68) under a detection wavelength of 283nm.RESULTS: The linear range of hesperidin was 49.6～892.8 ng(r=0.999 9) with an average recovery rate of 99.02%(RSD=0.45%,n=9).CONCLUSION:The method is simple,accurate,reproducible and applicable for the quality control of Yangweishu tablets.

AIM: To establish a method for the quality standard of Chanfukang Granules (Radix Astragali, Herba Leonuri, Fructus Aurantii, Herba Agrimoniae, Radix Rehmanniae, etc.). METHODS: TLC was used for identification of Herba Leonuri, Fructus Aurantii, Herba Agrimoniae, Radix Rehmanniae. The content of astragaloside Ⅳ was determined by HPLC-ELSD. RESULTS: The TLC identification was highly specific and the spots clear and concentrated. The linear range of astragaloside Ⅳ was 0.336-2.016 ?g, r=0.999 4. The average recovery was 97.13% and RSD was 1.3%. CONCLUSION: The method is simple and accurate. It can be used for quality control of Chanfukang Granules.

OBJECTIVE:To optimize the extraction technology of Zishen yangyin granules.METHODS:The yield of the extractum and the content of the extraction using 80% alcohol as solvent were used as indexes to optimize the extraction technology of Zishen yangyin granules by orthogonal experiment with the times of extraction,the extraction time and the amount of water added as factors.RESULTS:The optimal extraction conditions were as follows:the extraction was carried out for 3 times by adding water at an amount of 9 times,6 times and 6 times,respectively that of solid substance with decoction time of 3 h,2 h and 1 h,respectively.CONCLUSION:The optimal extraction process was proved to be time-saving and energy-saving and suitable for large production.