1.The expression of MMP-1, COX2 induced by IL-1? in human dental pulp cells
Qun LU ; Xuedong ZHOU ; Jun CAO
Journal of Practical Stomatology 1995;0(04):-
Objective:To study the effect of endogenous IL-1? on the expression of matrix metalloproteinases (MMPs) and COX2 in dental pulp cells. Methods:Human dental pulp cells were treated with human recombinant IL-1? at 1 nmol/L in serum-free medium for 18 h. Then the cells were collected and total RNA was isolated, MMPs and COX2 mRNA expression was assessed by semiquantitative RT-PCR. Results:IL-1? at 1 nmol/L induced the expression of COX2 and MMP-1 mRNA in human dental pulp cells. Conclusion:IL-1? may contribute to stimulating expression of MMPs and COX2 in the dental pulp during pulpitis.
2.Adsorption Capability and Kinetics of Chitosan for Lead in Water
Chunmei DING ; Qun LIU ; Zhiyi CAO
Journal of Environment and Health 2007;0(11):-
Objective To understand the adsorption capability and kinetics of chitosan (CTS) for Pb(II) in water. Methods The spectrophotometry was used to explore the effects of time, temperature, pH value and ion intensity on the adsorption capability of CTS for lead. Results The adsorption speed was faster at the beginning, then to the balance status 80 minutes later. The adsorption rate increased as the temperature increased. pH value could influence the adsorption, the adsorption capacity reached to the maximum when the pH values were 3.6-4.6. The sodium chloride solution showed an inhibitory effect on the adsorption with a dose dependent manner. Conclusion The adsorption is influenced by the effects of time, temperature, pH value, and ion intensity. The apparent energy(?E) is 5.11 kJ/mol.
3.Analysis of incidence rate, characteristics and related risk factors of high intraocular pressure after pars plana vitrectomy
International Eye Science 2015;(5):853-855
? AlM: To analyze the incidence, characteristics and related risk factors of high intraocular pressure after pars plana vitrectomy ( PPV) .
?METHODS: Totally, 146 patients (146 eyes) undergone PPV in our hospital were selected. Age, gender, eye, course and operation time of patients were compared, in order to understand the incidence rate and characteristics of high intraocular pressure. Primary diseases, intraoperative treatment methods and intraocular tamponade type were compare, in order to analyze the related risk factors of high intraocular pressure.
? RESULTS: Forty - seven patients occurred high intraocular pressure after operation, the incidence rate was 32. 2%. There was no significant difference in age, gender, eye, course and operation time (P>0. 05). The incidence rate in diabetic patients with simple vitreous hemorrhage and with tractional retinal detachment were 21.1% and 57.6%, respectively (P<0.05). The incidence rate in retinal detachment with PVR below grade C2 and above C2 were 19. 0% and 43. 8%, respectively (P<0. 05). The incidence rate in ocular trauma with vitreous hemorrhage and with intraocular foreign bodies were 25. 0% and 70. 0%, respectively (P<0. 05). The incidence rate of patients treated with panretinal photocoagulation was 50. 8%, significantly higher than patients without treated with panretinal photocoagulation (P<0. 05). The incidence rate of patients treated with part panretinal photocoagulation was 29. 5%, higher than patients without treated with panretinal photocoagulation, but there was no statistical difference ( P > 0. 05 ). The incidence rate of using silicone oil, C3 F8 and simple ventilation were 59. 7%, 34. 5% and 14. 5%, respectively (P<0. 05).
? CONCLUSlON: After vitrectomy intraocular hypertension incidence and preoperative, intraoperative treatment of primary disease is closely related to factors such as the way and intraocular tamponade.
4.Prevention of Antibiotic-associated Diarrhea Induced by Eradication Therapy of Helicobacter pylori Infection
Yanju CAO ; Yusheng ZHANG ; Changmin QU ; Qun YUAN
Chinese Journal of Nosocomiology 2006;0(05):-
0.05).The morbidity of AAD was obviously lower in group B than that in group A(P
5.A Randomized Controlled Trial of Ozone Injection plus Electrothermal Acupuncture for Treatment of Knee Osteoarthritis
Wenji CAO ; Qun WU ; Qunwei QU ; Yujie SHEN
Shanghai Journal of Acupuncture and Moxibustion 2017;36(6):739-743
Objective To compare the efficacy of ozone injection plus electrothermal acupuncture versus oral glucosamine and nimesulide in treating knee osteoarthritis and investigate the effects of the two treatments on the WOMAC total score and the pain, stiffness and physical function scores.Method Eighty patients with knee osteoarthritis were randomly allocated to combination and Western medicine groups, 40 cases each. The combination group received a combined treatment with intra-articular ozone injection and electrothermal acupuncture and the Western medicine group took glucosamine hydrochloride and nimesulide sustained-release tablets. The WOMAC score was recorded in the patients before and after treatment. The therapeutic effects were evaluated using the WOMAC score. Result The control and marked efficacy rate of ozone injection plus electrothermal acupuncture for knee osteoarthritis was higher than that of Western medicine. The WOMAC score decreased in both groups after treatment (P<0.05) but decreased more in the combination group than in the Western medicine group (P<0.05). There were no significant post-treatment differences in the pain and stiffness scores between the combination and Western medicine groups (P>0.05). The physicalfunction score decreased more in the combination group than in the Western medicine group (P<0.05).Conclusion Ozone injection plus electrothermal acupuncture is more effective than Western medicine in treating knee osteoarthritis. It is more effective in improving knee function but not in relieving the pain and joint stiffness in comparison with Western medicine.
6.Study of Experimental Parkinsonian Animal by Using High Performance Liquid Chromatography with Polymer-Overoxidized Polypyrrole Film Chemically Modified Electrode
Wen ZHANG ; Qun XU ; Xuni CAO ; Meichuan LIU ; Litong JIN
Chinese Journal of Analytical Chemistry 2001;29(2):133-137
A novel polymer- overoxidized polypyrrole film chemically modified electrode (CME) as the liquid chromatography-electrochemical detector (LC-ECD) was fabricated and applicated, which could be used to determine the monoamine neurotransmitters. The experimental model of parkinsonian animal was established by using medicine. Microdialysis sampling coupled with LC-ECD was used to monitor the monoamine neurotransmitters and their metabolites in experimental animal brain in vivo under different situations. The mechanism of experimental animal's Parkinsonian disease was studied elementarily. An accurate and reliable analysis method was supplied for filting the new and the more effective medicine to cure parkinsonian disease.
7.Effects of spinal pedicle screw internal fixation at different extraversion angles Biomechanical evaluation
Qun CHEN ; Zhengshuai JIN ; Xiaojian CAO ; Quan JIANG
Chinese Journal of Tissue Engineering Research 2008;12(13):2573-2575
BACKGROUND: It has been demonstrated that pedicle screw internal fixation influencing factors involve screw structural morphology, thread parameter, bone density, moment size for tightening screw during operation, and depth of screw placement. There is little known about the correlation of pullout strength of spinal pedicle screw with device for transverse traction to extraversion angle. OBJECTIVE: To assess effect of the spinal pedicle screw with device for transverse traction on pullout strength at different extraversion angles. DESIGN: Repeated measurement. SETTING: Center for Bone Joint, the First Affiliated Hospital of Nanjing Medical University. PARTICIPANTS: This study was performed at Laboratory for Material Mechanics, Hehai University between June and November 2003. A total of 18 adult dried lumbar vertebrae (L1-5) were provided by Department of Anatomy, Nanjing Medical University, and recruited for this study. The protocol was approved by the hospital's Ethics Committee. The pedicle screw was made of stainless steel. Each pedicle screw had a diameter of 5.5 nun, total length of 150 nun (thread part 50 into included), and the same thread parameter. Electrical universal material machine (EW type) was provided by Laboratory for Material Mechanics of Hehai University. METHODS: Bone density was measured with a single photon bone density determinator. According to the bone density, the lumbar vertebrae were numbered and randomly divided into 3 groups with 6 lumbar vertebrae in each: extraversion angle 5 ° group, extraversion angle 15° group, and extraversion angle 30° group. ① Installation of pedicle screw and clamping apparatus: According to Wein-Stein method, one entry-point was selected at each side of lumbar vertebra, and at the sametime, extraversion angle 5°, 15° ,and 30° were respectively defined for extraversion angle 5° , 15° ,and 30° groups. A 50 mm-depth pinhole was drilled with a drill bit with a diameter of 3.0 nun. Pedicle screw was screwed into 50 nun, and its end part was connected to the device for transverse traction. Spinal vertebrae and the device for transverse traction were fixed with a specially made clamping apparatus. ② Determination of pullout strength and observation of pedicle and vertebral injury: Spinal vertebrae, on which pedicle screw and device for transverse traction were installed, was placed on a EW electrical universal material machine together with clamping apparatus for determining the pullout strength of pedicle screw. Sensor was connected to a computer to draw strength-displacement curve. The wave crest of the curve was considered the maximum pullout strength. At the same time, injuries to pedicle and vertebra caused by pullout of pedicle screw were observed. MAIN OUTCOME MEASURES: Pullout strength and injuries to pedicle and vertebra. RESULTS:①The mean maximum pullout strength of pedicle screw was respectively 0.878 167, 1.420 333, and 2.154 167 KN for extraversion angle 5° , 15 ° , and 30° groups. There was significant difference among the 3 groups (F = 12.554 22, P < 0.01). ② In the extraversion angle 5° group, 4 patients presented with cortical bone fracture which occurred at the entrance for pedicle screw, and 2 patients presented with fragmentation of junctional zone between pedicle and vertebral posterior edge; In the extraversion angle 15° group, 1 patient presented with cortical bone fracture which occurred at the entrance for pedicle screw, 4 patients presented with fragmentation of junctional zone between pedicle and vertebral posterior edge, and 1 patient presented with vertebral posterior coronal fragmentation; In the extraversion angle 30° group, 1 patient presented with cortical bone fracture which occurred at the entrance for pedicle screw, 2 patients presented with fragmentation of junctional zone between pedicle and vertebral posterior edge, and 3 patients presented with vertebral posterior coronal fragmentation. There was statistical significance in the intergroup rank-sum test (P < 0.01).CONCLUSION: During application of pedicle screw with device for transverse traction, proper accrescence of extraversion angle can increase pullout strength of the screw and enhance fixative strength, and excessive extraversion angle easily injures vertebra.
8.Correlation of self-efficacy and positive degree of cervical spondylosis patients
Hongyun ZHAO ; Qun LI ; Hong DING ; Lei CAO ; Yun GU
Modern Clinical Nursing 2016;15(11):23-26
Objective To investigate the relationship between self-efficacy and positive degree in patients with cervical spondylosis.Method A questionnaire survey was conducted among 98 patients with cervical spondylosis.Results The self-efficacy score was 6.30±1.56,the score on the positive degree was 53.76 ±12.53.The self-efficacy and positive degrees were positively correlated (r=0.531,P<0.001).Conclusions The patient's self-efficacy and positive degree are at medium level.Nursing staff should take corresponding measures to improve self-efficacy of cervical spondylosis patients,in order to improve its positive degree and achieve the purpose of effective self-management and health promotion.
9.Prediction of spatial distribution of Himalayan marmot based on geographic information system and ecological niche model in Qinghai Province
Mengxu GAO ; Juanle WANG ; Chunxiang CAO ; Qun LI ; Yifan LI
Chinese Journal of Endemiology 2015;34(5):318-321
Objective To predict the spatial distribution of Himalayan marmot using geographic information system (GIS) and Genetic Algorithm for Rule-set Production (GARP) model based on the monitoring data of Himalayan marmot in Qinghai Province.Methods Based on the data of routine monitoring and field survey by Global Position System (GPS) of Himalayan marmot,the position data was processed by spatial mapping using ArcGIS software.Ecological environment variables related to Himalayan marmot including terrain,slope,temperature,precipitation,vegetation,land use and other related variables were extracted and analyzed.The prediction model of Himalayan marmot distribution was constructed based on GARP model and ArcGIS software,and the spatial distribution mapping and analysis were carried out.Results Totally 198 points of Himalayan marmot were obtained by combining the recovery position with GPS information.The average model error of omission was 1.998 through the GARP modeling,while the optimal 100 model were highly statistically significant (all x2 > 163.03,all P < 0.01).The spatial distribution of predicted probability was divided into three grades including less than < 40%,40%-< 80% and 80%-100% using ArcGIS,and the area with the prediction probability of 80%-100% was the most suitable distribution area of Himalayan marmot.Conclusions The spatial distribution of plague host animal is predicted successfully using GIS and GARP ecological niche model.The result is more accurate compared to the statistic area by administrative region,which can provide important reference for plague prevention and control.
10.Cloning and analysis of HMGR gene conserved fragments in Atractylodes lancea
Qun LIU ; Xiaoying CAO ; Jihong JIANG ; Chuanchao DAI
Chinese Traditional and Herbal Drugs 1994;0(10):-
Objective To clone and sequence cDNA encoding 3-hydroxy-3-methylglutaryl-coenzyme A reductase(HMGR) from Atractylodes lancea.Methods The cDNA,encoding HMGR in A.lancea,was amplified by RACE strategy with the cDNA of the total RNA of young leaves as the template.The partial fragments of HMGR were cloned and sequenced.Results The analysis results revealed that the conserved fragments were 458 bp.At the same time,the two fragments had been obtained 84.28% identification in nucleotide acid and 92.11% identification in corresponding amino acid,named as HMGRcr1 and HMGRcr2,respectively.It was deduced that they may be members of the HMGR gene family in A.lancea.Sequencing analysis showed that HMGRcr1 and HMGRcr2 had high identity with HMGR from other plants.Conclusion The cDNA encoding HMGR from A.lancea is cloned and reported for the first time.The work will provided a foundation for exploring the mechanism of terpenes biosynthesis and application to the other medicinal plants.