ObjectiveTo establish a model that can quickly identify the aroma components in different parts of Nardostachys jatamansi， so as to provide a quality control basis for the market circulation and clinical use of N. jatamansi. MethodsHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） combined with Smart aroma database and National Institute of Standards and Technology（NIST） database were used to characterize the aroma components in different parts of N. jatamansi， and the aroma components were quantified according to relative response factor（RRF） and three internal standards， and the markers of aroma differences in different parts of N. jatamansi were identified by orthogonal partial least squares-discriminant analysis（OPLS-DA） and cluster thermal analysis based on variable importance in the projection（VIP） value >1 and P<0.01. The odor data of different parts of N. jatamansi were collected by Heracles Ⅱ Neo ultra-fast gas phase electronic nose， and the correlation between compound types of aroma components collected by the ultra-fast gas phase electronic nose and the detection results of HS-SPME-GC-MS was investigated by drawing odor fingerprints and odor response radargrams. Chromatographic peak information with distinguishing ability≥0.700 and peak area≥200 was selected as sensor data， and the rapid identification model of different parts of N. jatamansi was established by principal component analysis（PCA）， discriminant factor alysis（DFA）， soft independent modeling of class analogies（SIMCA） and statistical quality control analysis（SQCA）. ResultsThe HS-SPME-GC-MS results showed that there were 28 common components in the underground and aboveground parts of N. jatamansi， of which 22 could be quantified and 12 significantly different components were screened out. Among these 12 components， the contents of five components（ethyl isovalerate， 2-pentylfuran， benzyl alcohol， nonanal and glacial acetic acid，） in the aboveground part of N. jatamansi were significantly higher than those in the underground part（P<0.01）， the contents of β-ionone， patchouli alcohol， α-caryophyllene， linalyl butyrate， valencene， 1，8-cineole and p-cymene in the underground part of N. jatamansi were significantly higher than those in the aboveground part（P<0.01）. Heracles Ⅱ Neo electronic nose results showed that the PCA discrimination index of the underground and aboveground parts of N. jatamansi was 82， and the contribution rates of the principal component factors were 99.94% and 99.89% when 2 and 3 principal components were extracted， respectively. The contribution rate of the discriminant factor 1 of the DFA model constructed on the basis of PCA was 100%， the validation score of the SIMCA model for discrimination of the two parts was 99， and SQCA could clearly distinguish different parts of N. jatamansi. ConclusionHS-SPME-GC-MS can clarify the differential markers of underground and aboveground parts of N. jatamansi. The four analytical models provided by Heracles Ⅱ Neo electronic nose（PCA， DFA， SIMCA and SQCA） can realize the rapid identification of different parts of N. jatamansi. Combining the two results， it is speculated that terpenes and carboxylic acids may be the main factors contributing to the difference in aroma between the underground and aboveground parts of N. jatamansi.

ObjectiveTo investigate the trends in diabetes mortality and potential years of life lost (PYLL) among residents of Huangpu District, Shanghai from 1993 to 2021, to analyze the long-term trends of diabetic patients with different characteristics and to provide a reference for scientific prevention and control of diabetes in aging urban areas. MethodsDiabetes mortality data were obtained from the Huangpu District cause of death registration records in the Shanghai death cause registration system. Indicators such as crude mortality rate, standardized mortality rate, potential years of life lost (PYLL), average years of life lost (AYLL), annual percentage change (APC), and average annual percentage change (AAPC) were used to analyze diabetes-related mortality and life loss. Statistical analyses were performed using software SPSS 21.0 and Joinpoint 5.0.2. ResultsFrom 1993 to 2021, the average annual crude mortality rate of diabetes in Huangpu District was 46.56/100 000, and the average annual standardized mortality rate was 20.44/100 000. The crude mortality rate and standardized mortality rate of diabetes for female residents were higher than those for males. The crude mortality rate showed an overall increasing trend [AAPC=2.81% (95%CI: 0.20%‒5.49%), P<0.05], while the increase in standardized mortality rate significantly slowed [AAPC=0.15% (95%CI: -2.27%‒2.63%)], P<0.05]. The mortality rate rose rapidly in the 70‒74 years age group and peaked in the 85‒ years age group (607.69/100 000). Diabetes accounted for a cumulative PYLL of22 741 person-years, with an average annual AYLL of 1.88 years and an average annual potential years of life lost rate (PYLLR) of 0.82‰. Male residents had higher PYLL, AYLL, and PYLLR than females. ConclusionDiabetes mortality rates in Huangpu District have increased year by year, resulting in significant life loss. However, the age-standardized mortality rate increase has markedly slowed. Efforts should focus on elderly diabetic patients aged ≥70 years, by leveraging platforms such as community-based chronic disease health support centers, efforts should be made to enhance diabetes screening service for middle-aged and elderly residents. Consequently, elderly diabetic patients’ awareness of diabetes and responce to related complications is improved, which would be conducive to controling the progression of complications and reducing the mortolity risk of diabetes.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Qualitative and quantitative analysis methods for chemical components of different processed products of Corni Fructus were established to systematically characterize and identify these components, and the content of the main differential components was determined. The chemical components of different processed products of Corni Fructus were collected using ultra-high performance liquid chromatography-quadrupole time-of-flight tandem mass spectrometry(UPLC-Q-TOF-MS). Through analysis of self-built databases, literature, and reference standards, a total of 93 components were obtained, including 19 iridoids, 15 flavonoids, 16 organic acids, eight triterpenoids, eight tannins, four amino acids, two polysaccharides, five olefins, and 16 other compounds. Additionally, by using multivariate statistical methods, the differential components between different processed products of Corni Fructus were screened under the conditions of VIP>1.0 and FC<0.5 or FC>2.0 and P<0.05. The PCA and OPLS-DA results showed differences in the chemical components between different processed products of Corni Fructus. A total of 21 differential components were screened, including tartaric acid, morroniside, and rutin. On this basis, ultra-high performance liquid chromatography-triple quadrupole tandem mass spectrometry(UPLC-QqQ-MS/MS) was used to determine the content of 10 main common differential components, including gallic acid, morroniside, ursolic acid, loganin, swertiamarin, rutin, 5-hydroxymethylfurfural, cornuside Ⅰ, quercetin, and oleanolic acid. The above 10 components showed a good linear relationship within the determined concentration range, with the precision, stability, repeatability, and sample recovery rate all meeting the requirements. Compared with that in Corni Fructus, the content of iridoid glycosides in wine-prepared Corni Fructus and wine-and honey-prepared Corni Fructus decreased, while the content of gallic acid, rutin, quercetin, 5-hydroxymethylfurfural, ursolic acid, and oleanolic acid increased. Compared with wine-prepared Corni Fructus, wine-and honey-prepared Corni Fructus showed varying degrees of increase in all other components, except for a slight decrease in gallic acid content. In summary, this study clarified the influence of different processing methods on the chemical components of Corni Fructus, providing a theoretical basis for the scientific connotation, overall quality evaluation, and clinically rational application of Corni Fructus processing in the future.
Tandem Mass Spectrometry/methods* ; Chromatography, High Pressure Liquid/methods* ; Cornus/chemistry* ; Drugs, Chinese Herbal/chemistry* ; Fruit/chemistry*

Syringa pinnatifolia, belonging to the family Oleaceae, is a species endemic to China. It is predominantly distributed in the Helan Mountains region of Inner Mongolia and Ningxia of China. The peeled roots, stems, and thick branches have been used as a distinctive Mongolian medicinal material known as "Shan-chen-xiang", which has effects such as suppressing "khii", clearing heat, and relieving pain and is employed for the treatment of cardiovascular and pulmonary diseases and joint pain. Over the past five years, significant increase was achieved in research on chemical constituents and pharmacological effects. There were a total of 130 new constituents reported, covering sesquiterpenoids, lignans, and alkaloids. Its effects of anti-myocardial ischemia, anti-cerebral ischemia/reperfusion, sedation, and analgesia were revealed, and the mechanisms of agarwood formation were also investigated. To better understand its medical value and potential of clinical application, this review updates the research progress in recent five years focusing on the chemical constituents and pharmacological effects of S. pinnatifolia, providing reference for subsequent research on active ingredient and support for its innovative application in modern medicine system.
Medicine, Mongolian Traditional ; Humans ; Drugs, Chinese Herbal/pharmacology* ; Animals ; Syringa/chemistry*

The traditional Chinese medicine(TCM) industry is a crucial part of China's pharmaceutical sector and plays a strategic role in ensuring public health and promoting economic and social development. In response to the practical demand for high-quality development of the TCM industry, this paper focused on the bottlenecks encountered during the digital and intelligent transformation of TCM production systems. Specifically, it explored technical strategies and methodologies for constructing the best TCM production mode. An innovative artificial intelligence(AI)-centered technical architecture for TCM production was proposed, focusing on key aspects of production management including process modeling, state evaluation, and decision optimization. Furthermore, a series of critical technologies were developed to realize the best TCM production mode. Finally, a novel AI-driven TCM production mode characterized by a closed-loop system of "measurement-modeling-decision-execution" was presented through engineering case studies. This study is expected to provide a technological pathway for developing new quality productive forces within the TCM industry.
Artificial Intelligence ; Drugs, Chinese Herbal ; Medicine, Chinese Traditional/methods* ; Humans

Melicope pteleifolia is a plant belonging to the Melicope genus of the Rutaceae family. Known for a bitter taste and cold nature, its stems and tender branches with leaves possess properties of clearing heat, detoxifying, dispelling wind, and removing dampness and can be used to treat sore throat, malaria, jaundice hepatitis, rheumatic bone pain, eczema, dermatitis, and sores and ulcers. In this study, 19 compounds were isolated from the chloroform and n-butanol extracts of M. pteleifolia leaves by using liquid chromatography-mass spectrometry(LC-MS) and proton nuclear magnetic resonance(~1H-NMR)-guided separation techniques. The compounds were identified as isoleptonol(1), leptaones B-E(2-5), friedelin(6), evodionol(7), ethyl p-hydroxybenzoate(8), litseachromolaevane A(9), quercetin-7,3',4'-trimethyl ether(10), kokusaginin(11), 8-(1-hydroxyethyl)-5,6,7-trimethoxy-2,2-dimethyl-2H-1-benzopyran(12), ethyl p-hydroxycinnamate(13), 3-hydroxy-9-methyl-6H-benzo\[c\]chromen-6-one(14), agrimonolide(15), 7-hydroxycoumarin(16), scopoletin(17), isoscutellarein(18), and agrimonolide 6-O-glucoside(19). Among these, the new compounds included one chromene and four meroterpenoid(1-5). The anti-inflammatory activities of the newly identified compounds 1-5 were screened in vitro, showing that the five compounds(1-5) exhibited inhibitory effects on nitric oxide(NO) production in BV2 cells induced by lipopolysaccharide(LPS)/interferon(IFN)-γ, with IC_(50) values ranging from 12.25 to 36.48 μmol·L~(-1).
Anti-Inflammatory Agents/isolation & purification* ; Mice ; Animals ; Rutaceae/chemistry* ; Drugs, Chinese Herbal/isolation & purification* ; Macrophages/immunology* ; Nitric Oxide/immunology*

OBJECTIVE: To analyze the clinical efficacy of manual reduction combined with 3D printing small splint external fixation and synchronous manual reduction combined with traditional small splint external fixation in the treatment of humeral shaft. METHODS: Between January 2021 and December 2022, 40 patients with humeral shaft fractures were treated with 3D printing small splints and traditional small splints. They were divided into 3D group and traditional group according to different fixation methods. Among them, there were 15 males and 5 females in the 3D group, aged from 20 to 52 years old with an average of (36.3±15.6) years old. In the traditional group there were 17 males and 3 females, aged from16 to 51 years old with an average of (32.9±17.2) years old. The occurrence of complications, duration of fracture healing, rate of fracture healing, subjective evaluation scores for brace comfort at 1 week and 4 weeks, as well as the Constant-Murley shoulder function score and Mayo elbow function score at 8 weeks and 16 weeks were compared between the two groups. RESULTS: All patients were followed up for 16 weeks. The 3D group did not experience any complications, while there were two cases of complications in the traditional group. However, this difference was not found to be statistically significant (χ²=2.105, P=0.146). The fracture healing time of the 3D group (90.1±4.5) days was significantly shorter compared to that of the traditional group (93.3±3.8) days (P<0.05). The subjective evaluation scores for brace comfort in the 3D group (53.7±2.3) points and (62.8±1.1) points were significantly higher than those in the traditional group (45.6±2.4) points and (52.3±1.4) points at 1 and 4 weeks after reduction (P<0.05). After 8 weeks of reduction, the Constant-Murley shoulder function score in the 3D group was(68.1±5.3) points, which demonstrated a statistically significant improvement compared to the traditional group(54.3±4.9) points (P<0.05). However, at 16 weeks post-reduction, there were no significant differences observed between the two groups (P>0.05). The Mayo elbow function score of the 3D group (84.1±7.5) points was significantly superior to that of the traditional group (79.5±6.8) points at 8 weeks post-reduction (P<0.05). However, there was no statistically significant difference between the two groups at 16 weeks post-reduction (P>0.05). CONCLUSION For humeral shaft fractures with conservative treatment indications, manual reduction combined with 3D printed small splints is a good choice for treatment. The patient's comfort level is higher, which can not only reduce the occurrence of complications, but also improve the fracture healing rate and joint function to a certain extent, and improve the patient's quality of life.
Humans ; Female ; Male ; Adult ; Middle Aged ; Humeral Fractures/physiopathology* ; Printing, Three-Dimensional ; Splints ; Adolescent ; Young Adult ; Fracture Healing

OBJECTIVE: To reveal the molecular basis of knee osteoarthritis (KOA) with Yang deficiency and blood stasis syndrome by analyzing the gene expression profiles in synovial fluid and blood of KOA patients with this syndrome. METHODS: A total of 80 KOA patients were recruited from October 2022 to June 2024, including 40 cases in the non-Yang deficiency and blood stasis group (27 males and 13 females), with an average age of (61.75±3.45) years old;and 40 cases in the Yang deficiency and blood stasis group (22 males and 18 females), with an average age of (62.00±2.76) years old. The levels of body mass index (BMI), high-density lipoprotein (HDL), low-density lipoprotein (LDL), fibrinogen, total cholesterol, and D-dimer were recorded and summarized. Blood and synovial fluid samples from patients were collected for gene expression profile microarray sequencing, and then PCR and immunohistochemistry were used for clinical verification on the patients' synovial fluid and cartilage samples. RESULTS: Logistic regression analysis showed that compared with KOA patients with non-Yang deficiency and blood stasis syndrome, those with Yang deficiency and blood stasis syndrome had increased BMI, LDL, fibrinogen, total cholesterol, and D-dimer, and decreased HDL, with a clear correlation between the two groups. There were 562 differential genes in the blood, among which 322 were up-regulated and 240 were down-regulated;755 differential genes were found in the synovial fluid, with 350 up-regulated and 405 down-regulated. KEGG signaling pathway analysis of synovial fluid revealed changes in lipid metabolism-related pathways, including cholesterol metabolism, fatty acid metabolism, and PPARG signaling pathway. Analysis of the involved differential genes identified 6 genes in synovial fluid that were closely related to lipid metabolism, namely LRP1, LPL, ACOT6, TM6SF2, DGKK, and PPARG. Subsequently, PCR and immunohistochemical verification were performed using synovial fluid and cartilage samples, and the results were consistent with those of microarray sequencing. CONCLUSION This study explores the clinical and genomic correlation between traditional Chinese medicine syndromes and knee osteoarthritis from the perspective of lipid metabolism, and proves that abnormal lipid metabolism is closely related to KOA with Yang deficiency and blood stasis syndrome from both clinical and basic aspects.
Humans ; Male ; Female ; Middle Aged ; Synovial Fluid/metabolism* ; Osteoarthritis, Knee/metabolism* ; Yang Deficiency/complications* ; Aged