One alkaline protease from Actinomucor elegans AS3.2778 was purified protein. The enzyme was purified using ammonium sulfate precipitation, ion exchange chromatography, hydrophobic chromatography and size exclusion chromatography method, and its properties were also investigated. The molecular weight of this enzyme is 32 kDa with SDS-PAGE method, optimum temperature is 60℃, optimum pH is 8.5 to 10.5, it is stable in the pH range of 6.0 to 9.0 at < 40℃ temperature, and being completely inhibited by the serine protease inhibitor, PMSF, indicated that it belongs to the serine protease family. Specificity test indicated this protease has extensive selectivity to peptide bones, especially to peptide bones composed of Leucine residue.

To systematically review the incidence rate of adverse drug reaction/event by Qingkailing injection. Such databases as the PubMed, EMbase, the Cochrane library, CNKI, VIP WanFang data and CBM were searched by computer from foundation to July 30, 2015. Two reviewers independently screened literature according to the inclusion and exclusion criteria, extracted data and cross check data. Then, Meta-analysis was performed by using the R 3.2.0 software, subgroup sensitivity analysis was performed based on age, mode of medicine, observation time and research quality. Sixty-three studies involving 9,793 patients with Qingkailing injection were included, 367 cases of adverse reactions/events were reported in total. The incidence rate of adverse reaction in skin and mucosa group was 2% [95% CI (0.02; 0.03)]; the digestive system adverse reaction was 6% [95% CI(0.05; 0.07); the injection site adverse reaction was 4% [95% CI (0.02; 0.07)]. In the digestive system as the main types of adverse reactions/events, incidence of children and adults were 4.6% [0.021 1; 0.097 7] and 6.9% [0.053 5; 0.089 8], respectively. Adverse reactions to skin and mucous membrane damage as the main performance/event type, the observation time > 7 days and ≤ 7 days incidence of 3% [0.012 9; 0.068 3] and 1.9% [0.007 8; 0.046 1], respectively. Subgroup analysis showed that different types of adverse reactions, combination in the incidence of adverse reactions/events were higher than that of single drug, the difference was statistically significant (P < 0.05). This study suggested the influence factors of adverse reactions occur, and clinical rational drug use, such as combination, age and other fators, and the influence factors vary in different populations. Therefore, clinical doctors for children and the elderly use special care was required for a clear and open spirit injection, the implementation of individualized medication.
Adolescent ; Adult ; Aged ; Child ; Child, Preschool ; Drugs, Chinese Herbal ; adverse effects ; Female ; Humans ; Incidence ; Infant ; Infant, Newborn ; Injections ; Male ; Middle Aged

One factor at a time design and first order exponential model were applied to investigate the effects of the four major factors(temperature,ionic strength,pH and osmo-regulator) in the preservation process of nitrite oxidization bacteria(NOB),and a first order decay kinetics was introduced.The result showed that the anoxic decay rate of nitrifying bacteria reduced from 0.25 to 0.015,the half life was extend to 53d at 4℃,pH7.60,ionic strength 0.035mol/kg.The protecting effect of glycerin showed obviously better than that of other cryoprotectants at 4℃.

Objective To investigate the current status of occupational hazards and prevention and control of occupational ， - Methods ， diseases in micro small and medium sized manufacturing enterprises in Jiangxi Province. A total of 1 034 micro - small and medium sized manufacturing enterprises in Jiangxi Province were selected as the research subjects using a stratified cluster sampling method. The exposure of occupational hazards and the implementation of occupational hazards prevention and Results ， control measures were investigated. Among the 1 034 enterprises the small and micro enterprises accounted for ， 91.5%. The enterprises with serious occupational hazards were mainly concentrated in metallurgy building materials industry ， and machinery equipment and electrical appliance manufacturing industry. The exposure rate of occupational hazard factors in ， ， （ vs the categories of occupational hazard factors from high to low was physical factors dust and chemical factors 78.9% 52.8% vs ，P ） （ ）， ， 25.0% <0.01 . The exposure rate from high to low was metallurgy and building materials industry 60.8% machinery （ ）， ， equipment and electrical equipment manufacturing industry 42.9% light industry textile and tobacco processing industry （ ）， ， （ ）（P ） 32.0% chemical petrochemical and pharmaceutical industry 21.0% <0.01 . Noise exposure accounted for 98.3% in the workers exposed to physical factors. The implementation rate of prevention and control measures for occupational hazards ， in enterprises from high to low was the staffing of occupational health management personnel the establishment of ， ， occupational health management institutions the establishment of occupational health management systems the detection ， ， of occupational hazards the evaluation of the control effect of occupational hazards of construction projects and the - （ vs vs vs vs vs ，P ） pre evaluation of occupational hazards of construction projects 32.5% 25.7% 23.7% 16.2% 6.9% 4.2% <0.01 . Conclusion The focus of prevention and control of occupational hazards in manufacturing industry in Jiangxi Province is noise ， - and dust in small and micro metallurgy and building materials industry. Most of the micro small and medium sized manufacturing enterprises have not carried out the detection of occupational hazards and evaluation of occupational hazards in accordance with the law. The situation of occupational disease prevention and control is still challenging.

Objective To investigate the current status of occupational hazards and prevention and control of occupational ， - Methods ， diseases in micro small and medium sized manufacturing enterprises in Jiangxi Province. A total of 1 034 micro - small and medium sized manufacturing enterprises in Jiangxi Province were selected as the research subjects using a stratified cluster sampling method. The exposure of occupational hazards and the implementation of occupational hazards prevention and Results ， control measures were investigated. Among the 1 034 enterprises the small and micro enterprises accounted for ， 91.5%. The enterprises with serious occupational hazards were mainly concentrated in metallurgy building materials industry ， and machinery equipment and electrical appliance manufacturing industry. The exposure rate of occupational hazard factors in ， ， （ vs the categories of occupational hazard factors from high to low was physical factors dust and chemical factors 78.9% 52.8% vs ，P ） （ ）， ， 25.0% <0.01 . The exposure rate from high to low was metallurgy and building materials industry 60.8% machinery （ ）， ， equipment and electrical equipment manufacturing industry 42.9% light industry textile and tobacco processing industry （ ）， ， （ ）（P ） 32.0% chemical petrochemical and pharmaceutical industry 21.0% <0.01 . Noise exposure accounted for 98.3% in the workers exposed to physical factors. The implementation rate of prevention and control measures for occupational hazards ， in enterprises from high to low was the staffing of occupational health management personnel the establishment of ， ， occupational health management institutions the establishment of occupational health management systems the detection ， ， of occupational hazards the evaluation of the control effect of occupational hazards of construction projects and the - （ vs vs vs vs vs ，P ） pre evaluation of occupational hazards of construction projects 32.5% 25.7% 23.7% 16.2% 6.9% 4.2% <0.01 . Conclusion The focus of prevention and control of occupational hazards in manufacturing industry in Jiangxi Province is noise ， - and dust in small and micro metallurgy and building materials industry. Most of the micro small and medium sized manufacturing enterprises have not carried out the detection of occupational hazards and evaluation of occupational hazards in accordance with the law. The situation of occupational disease prevention and control is still challenging.

OBJECTIVE: To observe the expression of discs large homolog 4 (DLG4) protein in hippocampus, amygdala and frontal cortex of rats and evaluate postsynaptic density in heroin dependence. METHODS: The rat heroin dependent model was established by increasing intraperitoneal injection of heroin. DLG4 proteins in hippocampus, amygdala and frontal cortex of heroin dependent 9, 18, 36 days rats were detected with immunohistochemical staining and compared with that in the control group. RESULTS: DLG4 proteins in hippocampus, amygdala and frontal cortex were gradually reduced with extension of heroin dependent time. CONCLUSION Heroin dependence can affect postsynaptic density of hippocampus, amygdala and frontal cortex. The changes become more apparent with extension of heroin dependence time.
Amygdala/metabolism* ; Animals ; Disks Large Homolog 4 Protein ; Frontal Lobe/metabolism* ; Heroin/pharmacology* ; Heroin Dependence ; Hippocampus/metabolism* ; Injections, Intraperitoneal ; Intracellular Signaling Peptides and Proteins/metabolism* ; Membrane Proteins/metabolism* ; Rats

OBJECTIVETo explore the effect of electro-acupuncture to improve the bladder function after acute spinal cord injury in rats and its possible mechanism.

METHODSSixty healthy adult male SD rats of SPF grade, with body weight of 220 to 250 g, one week after feeding adaptation, were randomly divided into sham operation group, model group, electro-acupuncture group, electro-acupuncture control group with 15 rats in each group. Sham operation group underwent no stimulation, and the moderate damage model of spinal cord injury were made in other three groups according to modified Allens method. The model group were not treated, electro-acupuncture group were treated with electro-acupuncture on Zhibianxue and Shuidaoxue, and electro-acupuncture control group were treated with electro-acupuncture on 0.5 inch next to Zhibianxue and Shuidaoxue. The frequency of 2/100 Hz, current of 1 mA, stimulation time of 15 min, once a day, left and right alternately stimulate every time, for a total of 7 times. The changes of residual urine volume and urine output in rats at the 1st and the 7th days after operation were observed. And 7 d later, the rats were sacrificed and the injured spinal cord were taken out to observe the apoptosis, and to detect the changes of Bcl-2, Bax, Bad content.

RESULTSAfter modeling,the rats of three groups showed different bladder dysfunction. In electro-acupuncture group and electro-acupuncture control group, the residual urine volume of the 7th day after operation was significant lower than the 1st day after operation (P < 0.001), and there was statistically significant difference on the 7th day after operation between two groups (P < 0.001). Compared with model group, the urine output of electro-acupuncture group and electro-acupuncture control group was significantly increased on the 7th day after operation, and there was sig- nificant difference between electro-acupuncture group and electro-acupuncture control group (P < 0.001). Electro-acupuncture can inhibit apoptosis of spinal cord neurons by TUNEL detection. Postoperative at 7 d, the rate of nerve cell apoptosis in electro -acupuncture group and electro-acupuncture control group was significant increased than model group (P < 0.01, P < 0.05), and there was significant difference between electro-acupuncture group and electro-acupuncture control group (P < 0.005). Compared with model group, the positive expression rate of Bax, Bad decreased (P < 0.01, P < 0.05), and Bcl-2 increased (P < 0.01) in electro-acupuncture group and electro-acupuncture control group,there was significant difference between electro-acupuncture group and electro-acupuncture control group (P < 0.01).

CONCLUSIONElectro-acupuncture can obviously promote the repair of acute spinal cord injury,its mechanism may be through increasing Bcl-2, inhibiting the expression of Bax, Bad, which inhibits the apoptosis of spinal cord neurons.

Animals ; Apoptosis ; Electroacupuncture ; Immunohistochemistry ; In Situ Nick-End Labeling ; Male ; Neurons ; cytology ; physiology ; Rats ; Rats, Sprague-Dawley ; Spinal Cord Injuries ; pathology ; physiopathology ; therapy ; Urinary Bladder ; physiopathology

?-lactamase inhibitor research is popular for its potential on ?-lactam antibiotics resistant strain.A ?-lactamase binding peptide SIPIS04-01 was obtained by the yeast two-hybid system.In vitro assay showed that it can inhibit the ?-lactamase activity.In order to improve the expression level of the recombinant peptide,a two-copy expression plasmid pYG563 was constructed by random orientation tandem repeat method after codon modification,the two-copy plasmid was successfully expressed and the product was increased by 48.4% than that of one-copy plasmid.Purified peptide showed inhibitory activity against TEM-1 ?-lactamase in vitro and the inhhibitory constant Ki was measured.

Abstract: Objective To analyze the occupational hazards of enterprises in Pingshan district of Shenzhen in 2017. Methods Occupational hazards were analyzed in 200 enterprises in Pingshan district of Shenzhen City selected using stratified Results random sampling method. A total of 24 industries were involved in the 200 enterprises. The declaration rate of ， occupational hazards was 91.5% and the exposure rate of occupational hazards among workers was 49.2%. The regular monitoring rate of occupational hazard factors in workplaces of the enterprises was 79.5%. There were 129 kinds of occupational ， ， hazard factors of which 19 factors exceeded the national occupational exposure limit accounting for 14.7%. The over standard ， ， ， ， ， ， ， ， rates of noise silica dust cotton dust methanol toluene and other dust were 28.7% 13.6% 11.8% 5.86% 0.5% and ， ， 0.4% respectively. There were 13 kinds of occupational hazard factors in the workplace of metal products industry all of which （ ） exceeded the occupational exposure limit. The exposure rate 56.7% of occupational hazard factors in workers was the highest. Conclusion ， ， The main occupational hazard factors were noise dust and chemical factor and the major occupational hazard industry was metal manufacturing in Pingshan district of Shenzhen City.

Currently, there are many traditional Chinese medicine (TCM) injections for treating ischemic stroke in the market, most of them have the efficacy of promoting blood circulation and removing blood stasis, but their reasonable applications are worth consideration. From the angles of traditional Chinese medicine and modern medicine, TCM injections that are commonly used in clinics were detected for their indications and pharmacological effects, compared in terms of their characteristics of clinical application, precautions, prohibition on use, caution and adverse reactions and categorized, in order to help clinicians with reasonable application of TCM injections.
Blood Circulation ; drug effects ; Cerebrovascular Disorders ; drug therapy ; physiopathology ; Drugs, Chinese Herbal ; administration & dosage ; Humans ; Injections