Objective: To analyze the epidemiological characteristics of pulmonary tuberculosis (PTB) among college students in Yangzhou from 2020 to 2024, so as to provide a scientific basis for developing prevention and control strategies. Methods: An epidemiological investigation was conducted among 162 college students with PTB, and 7 134 of their contacts were screened. Data were obtained from the tuberculosis information management system and on campus screening records. Using descriptive epidemiological methods, trends in incidence, seasonal distribution, and bacteriological characteristics were analyzed. Results: From 2020 to 2024, the annual average incidence of pulmonary tuberculosis among college students in Yangzhou was 29.42 per 100 000, showing an overall fluctuating downward trend ( χ 2=12.36, P <0.01). Cases were mainly concentrated in summer and autumn, with the highest proportion in autumn (41.36%, 67/162), followed by summer (23.46%, 38/162). The proportion of etiologically positive cases increased from 37.21% in 2020 to 71.43% in 2024; among positive cases, the proportion of latent tuberculosis infection (LTBI) decreased from 66.67% (10/15) to 26.67% (4/15). The etiological positive rate was higher in females than in males ( χ 2= 11.76 , P <0.01). Comparison of screening methods showed that among index cases, the LTBI detection rate of the recombinant Mycobacterium tuberculosis fusion protein skin test (C-TST) was higher than that of the tuberculin skin test (TST), but the difference was not statistically significant ( χ 2=0.65, P =0.42); among close contacts, the detection rate of TST was higher than that of C-TST (15.1%,10.1%; χ 2=5.23, P <0.05). Conclusion From 2020 to 2024, the annual average incidence of pulmonary tuberculosis among college students in Yangzhou showed an overall fluctuating downward trend, with differences in TB infection screening methods and gender.

ObjectiveTo construct a risk prediction model for frequent acute exacerbations of chronic obstructive pulmonary disease （COPD） under disease-syndrome combination， thus providing decision support for precise clinical intervention. MethodsA total of 2 029 patients with acute exacerbations of COPD admitted to the First Affiliated Hospital of Anhui University of Chinese Medicine from January 2020 to August 2024 were retrospectively included. These patients were classified into groups of frequent acute exacerbations （≥2 times/year） and infrequent acute exacerbations （<2 times/year） according to the hospitalization times per year. Risk factors were screened by LASSO regression combined with logistic regression， and a nomogram model was constructed. The model performance was assessed based on the area under the curve （AUC）， calibration curves， and decision curve analysis （DCA）. ResultsThe differences in baseline characteristics between the frequent acute exacerbations group （1 196 cases） and infrequent acute exacerbations group （833 cases） were not statistically significant. LASSO regression combined with multivariate logistic regression screened the following independent risk factors： body mass index （BMI）， hospitalization days， number of smoking years， place of residence， use of noninvasive ventilators， oxygen-demanding therapy， liver cirrhosis， use of systemic glucocorticosteroids， and traditional Chinese medicine syndrome （phlegm and stasis obstructing the lung）. The nomogram model showed good discrimination and calibration in both the training set （AUC=0.748） and validation set （AUC=0.774）. ConclusionThe risk prediction model for frequent acute exacerbations of COPD， integrating traditional Chinese medicine syndrome， constructed in this study has high accuracy. It can provide a scientific basis for early clinical identification of high-risk patients and individualized intervention.

A 71-year-old male presented with esophageal cancer and severe aortic valve regurgitation. Treatment strategies for such patients are controversial. Considering the risks of cardiopulmonary bypass and potential esophageal cancer metastasis, we successfully performed transcatheter aortic valve implantation and minimally invasive three-incision thoracolaparoscopy combined with radical resection of esophageal cancer (McKeown) simultaneously in the elderly patient who did not require neoadjuvant treatment. This dual minimally invasive procedure took 6 hours and the patient recovered smoothly without any surgical complications.

Psoriasis is a common chronic inflammatory systemic disease in dermatology. Its high prevalence， recurrence rate， and numerous comorbidities impose a significant physical and mental burden on patients. With the continuous advancement of modern medicine， the emergence of biological agents has improved clinical efficacy， making it possible to overcome psoriasis， in addition to classical treatments. However， in clinical practice， adverse reactions， drug resistance， recurrence rates， and immune drift cannot be ignored. Traditional Chinese medicine （TCM） has a history of thousands of years in treating psoriasis， demonstrating good efficacy， high safety， and a low recurrence rate， but a standardized management system is lacking. Therefore， the 25^th Clinical Diseases Responding Specially to TCM Treatment Series （Psoriasis） Youth Salon， hosted by the Chinese Association of Chinese Medicine and organized by the Youth Committee of the Chinese Association of Chinese Medicine， invited 29 experts and scholars from TCM， Western medicine， and interdisciplinary fields to actively discuss the "Advantages， Challenges， and Clinical Transformation of TCM and Western Medicine in the Diagnosis and Treatment of Psoriasis". The experts at the meeting concluded that the advantages of TCM in the treatment of psoriasis are as follows. Firstly， in the TCM-led treatment plan， TCM's understanding of psoriasis follows the principle of combining the differentiation of disease and syndrome. This approach distinguishes the basic contradiction from the current main contradiction and enables a clear grasp of the dynamic process of psoriasis development. Based on the system of syndrome differentiation and treatment， TCM intervention is applied to address the current main contradiction， and the optimal TCM treatment plan is formulated by combining internal and external treatments. Adhering to the principle of "what is visible outside must be addressed inside"， TCM can prevent and treat psoriasis comorbidities early by differentiating syndrome types. Secondly， in the integrated TCM and Western medicine treatment plan， the combination of both methods not only enhances efficacy but also reduces the adverse reactions of immunosuppressants and biological agents， lowering the recurrence rate. This conference provides a reference for the diagnosis and treatment of psoriasis using TCM and integrated TCM and Western medicine， opening up new ideas for clinical and basic research and guiding future research directions.

ObjectiveTo explore the mechanism by which the ethanol extract of Epimedium brevicornu （EEBM） intervenes in mesenchymal adipose-derived stem cells （ADSCs） to delay aging in castrated rats. MethodsForty-five 3-month-old SPF female SD rats were ovariectomized and randomly divided into model group， ADSCs treatment group， and ADSCs groups treated with low， medium， and high concentrations of EEBM （1， 50， 100 μg·L^-1）， referred to as the AE low， medium， and high concentration groups， with 9 rats in each group. After tail vein injection of 200 μL of the corresponding stem cell suspension， aging-related indicators including cyclin-dependent kinase inhibitor （p21）， tumor suppressor gene （p53）， interleukin-6 （IL-6）， interleukin-8 （IL-8）， superoxide dismutase （SOD）， malondialdehyde （MDA）， B-cell lymphoma-2 （Bcl-2）， Bcl-2-associated X protein （Bax）， cysteine-aspartic acid protease-3 （Caspase-3）， and lipofuscin were measured using enzyme-linked immunosorbent assay （ELISA） and Western blot. ResultsCompared with the model group， the IL-6 content in the AE low， medium， and high concentration groups was significantly decreased （P<0.05）. Lipofuscin， MDA， and IL-8 levels in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.01）， while SOD content was significantly increased （P<0.05， P<0.01）. Compared with the ADSCs treatment group， lipofuscin and IL-8 levels in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）. The MDA content was significantly decreased in the AE medium concentration group （P<0.01）. Compared with the model group， protein levels of p21， p53， Bax， and Caspase-3 in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， while the Bcl-2 protein level was significantly increased （P<0.01）. Compared with the ADSCs treatment group， protein levels of p21， p53， Bax， and Caspase-3 in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， and the Bcl-2 protein level in the AE low concentration group was significantly increased （P<0.01）. ConclusionThe results of this experiment show that EEBM-treated ADSCs or ADSCs may delay aging in castrated rats by inhibiting cell apoptosis， reducing cell cycle inhibitors and pro-inflammatory factors， enhancing antioxidant capacity， and reducing oxidative reactions. Moreover， EEBM-treated ADSCs demonstrate stronger anti-aging effects than ADSCs alone. This study provides experimental evidence supporting the clinical use of EEBM to intervene in ADSCs and delay aging.

Atopic dermatitis （AD） is a common pruritic and chronic inflammatory dermatosis in clinical practice and is one of the diseases responding specifically to traditional Chinese medicine （TCM）. With the launch of biological agents and small molecule drugs and the development and implementation of guidelines of diagnosis and treatment， clinical pathways of treatment of moderate to severe AD， and consensus on the whole-process management of AD， the clinical efficacy of moderate to severe AD has been significantly improved. However， there are still many unmet clinical needs that require more effective methods to meet. In response to the Opinions of the CPC Central Committee and the State Council on Facilitating the Inheritance， Innovation， and Development of Traditional Chinese Medicine and the spirit of the National Conference on TCM， the China Association of Chinese Medicine organized more than 20 experts in TCM dermatology， Western medicine dermatology， interdisciplinary fields， and industries to discuss the difficulties and advantages of TCM in the treatment of AD. TCM treatment for AD can not only improve rash and relieve itching but also solve many concomitant syndromes. The abundant external treatment methods of TCM have advantages for different special populations and rash characteristics. The concept of treating disease before its onset in TCM is in line with the chronic disease management mode of prevention and treatment of atopic march and prevention of recurrence. In addition， TCM therapy can reduce the use of topical glucocorticoids and has good safety. Regarding the comorbidity of AD， equal emphasis on TCM and Western medicine and multidisciplinary joint treatment should be advocated to achieve maximum benefit for patients. The exchange of TCM and Western medicine has clarified the positioning and advantages of TCM intervention in AD， providing guidance for clinical and scientific research.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.