Exercise is important for body composition promotion. Although many studies have indicated that physical competence promotes exercise participation, there are relatively few studies examining the relationships among these factors. The purpose of the present study was to model the relationships among body composition, exercise habits and physical competence by using structural equation modeling. The subjects were 223 Japanese male and female high school students. Height, lean bone mass and bone area ratio were measured. Exercise habits and physical competence scale including three subscales (perceived physical competence, feeling of control and peer and teacher acceptance) were assessed by self-administered questionnaires. Data were analyzed using structural equation modeling. The model showed acceptable fit indices (GFI = .905, AGFI = .863 CFI = .954, RMSEA = .069). The path from peer and teacher acceptance to exercise habit was significant (β = 0.51, p < .001). Moreover, the path from exercise habits and from perceived physical competence to body composition was significant (respectively β = 0.53; p < .001, β = 0.47, p < .001). We could model the relationships among body composition, exercise habits and physical competence. These results indicate that not only exercise habits but also physical competence promoting exercise participation influence on body composition promotion.

BACKGROUND: Reconstructive surgery is often required for tumors of the oral and maxillofacial region, irrespective of whether they are benign or malignant, the area involved, and the tumor size. Recently, three-dimensional (3D) models are increasingly used in reconstructive surgery. However, these models have rarely been adapted for the fabrication of custom-made reconstruction materials. In this report, we present a case of maxillary reconstruction using a laboratory-engineered, custom-made mesh plate from a 3D model.CASE PRESENTATION: The patient was a 56-year-old female, who had undergone maxillary resection in 2011 for intraoral squamous cell carcinoma that presented as a swelling of the anterior maxillary gingiva. Five years later, there was no recurrence of the malignant tumor and a maxillary reconstruction was planned. Computed tomography (CT) revealed a large bony defect in the dental-alveolar area of the anterior maxilla. Using the CT data, a 3D model of the maxilla was prepared, and the site of reconstruction determined. A custom-made mesh plate was fabricated using the 3D model (Okada Medical Supply, Tokyo, Japan). We performed the reconstruction using the custom-made titanium mesh plate and the particulate cancellous bone and marrow graft from her iliac bone. We employed the tunneling flap technique without alveolar crest incision, to prevent surgical wound dehiscence, mesh exposure, and alveolar bone loss. Ten months later, three dental implants were inserted in the graft. Before the final crown setting, we performed a gingivoplasty with palate mucosal graft. The patient has expressed total satisfaction with both the functional and esthetic outcomes of the procedure. CONCLUSION We have successfully performed a maxillary and dental reconstruction using a custom-made, pre-bent titanium mesh plate.

BACKGROUND: Recently, the prevalence of food allergies during childhood is increasing, with fruits being common allergens. However, data on allergens that cause fruit and vegetable allergies and pollen-food allergy syndrome (PFAS) in childhood are relatively few. This study aimed to examine the allergens in fruit and vegetable allergies in pediatric patients and to determine the association between fruit and vegetable allergies and PFAS.OBJECTIVE: This study aimed to examine the current status of fruit and vegetable allergies in Japanese children.METHODS: This was a multicenter case series observational study. The participants included children aged <15 years who developed allergic symptoms after eating fruits and vegetables and subsequently received treatment in the Pediatric Department of 6 hospitals in the Osaka Prefecture in Japan during the study period from August 2016 to July 2017. Participants' information was obtained using a questionnaire, and data were obtained by performing several types of allergy tests using blood samples.RESULTS: A total of 97 children (median age, 9 years; 56 males) were included in the study. Apple was the most common allergen, followed by peach, kiwi, cantaloupe, and watermelon. A total of 74 participants (76%) exhibited allergic symptoms due to PFAS; moreover, pathogenesis-related protein-10 (PR-10) was the most common allergen superfamily. On the contrary, in the group where neither PR-10 nor profilin was sensitized, kiwi and banana were the most common allergens, and the age of onset was lower than that in the PFAS group. Specific antibody titer was significantly associated with Birch for Bet v1 and latex for Bet v2 (r = 0.99 and r = 0.89).CONCLUSION: When we examine patients with fruit and vegetable allergies, we should first consider PFAS even in childhood specifically for children greater than 4 years old.
Age of Onset ; Allergens ; Asian Continental Ancestry Group ; Betula ; Child ; Citrullus ; Clinical Study ; Cucumis melo ; Eating ; Food Hypersensitivity ; Fruit ; Humans ; Hypersensitivity ; Japan ; Latex ; Musa ; Observational Study ; Prevalence ; Profilins ; Prunus persica ; Rhinitis ; Rhinitis, Allergic, Seasonal ; Vegetables

BACKGROUND: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. METHODS: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. RESULTS: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. CONCLUSIONS: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.
Chin ; Congenital Abnormalities ; Equidae ; Glenoid Cavity ; Humans ; Jaw ; Joints ; Mandible ; Mandibular Condyle ; Mandibular Osteotomy ; Maxilla ; Methods ; Oral and Maxillofacial Surgeons ; Orbit ; Orthognathic Surgery ; Osteotomy, Sagittal Split Ramus ; Surgery, Oral ; Temporomandibular Joint

Background: With improvements in the safety and stability of surgeries, the number of orthognathic surgeries is increasing. Most patients who undergo orthognathic surgeries are younger, and the number of orthognathic surgeries for patients with comorbidities is also increasing. We report a survey and clinical investigation of patients with comorbidities who underwent orthognathic surgeries at our department to improve the safety of orthognathic surgery. Results: The participants included 296 men and 712 women, with a mean age of 28 years (13–19 years, n=144; 20–29 years, n=483; 30–39 years, n=236; 40–49 years, n=102; 50–59 years, n=39; ≥60 years, n=4). In total, 347 patients underwent one-stage Le Fort type I osteotomy and sagittal split ramus osteotomy (SSRO), 243 underwent SSRO, 287 underwent plate removal, 126 underwent genioplasty and plate removal, and five underwent other surgeries. In total, 529 patients had comorbidities (52%), including allergic diseases (n=220, 33%), respiratory diseases (n=107, 16%), neurologic and psychiatric diseases (n=69, 10%), gynecologic diseases (n=28, 4%), hematologic diseases (n=27, 4%), cardiovascular diseases (n=24, 4%), digestive diseases (n=22, 3%), metabolic and endocrine diseases (n=18, 3%), spinal diseases (n=11, 2%), ophthalmologic diseases (n=11, 2%), renal and urological diseases (n=9, 1%), and other diseases (n=117, 18%). Among the patients with comorbidities, 11 with hemorrhagic diatheses (hemophilia and von Willebrand disease), arrhythmia (atrioventricular block), psychiatric disease (adjustment disorder), and metabolic disease (diabetes) required cautious perioperative management. The patient with hemophilia was managed with regular low-dose recombinant factor VIII replacement therapy, and the patient with type I diabetes mellitus was administered continuous insulin infusion and sliding-scale insulin therapy; both patients had an uneventful course. Conclusions The study findings suggest that with the increase in orthognathic surgeries, oral and maxillofacial surgeons should adequately manage cases requiring cautious perioperative control and highlight the importance of preoperative screening. Despite the well-established safety and postoperative stability of orthognathic surgeries, oral surgeons should adopt appropriate additional preventive measures for patients with comorbidities.

Background: Excessive bleeding is a major intraoperative risk associated with orthognathic surgery. This study aimed to investigate the factors involved in massive bleeding during orthognathic surgeries so that safe surgeries can be performed. Patients (n=213) diagnosed with jaw deformities and treated with bimaxillary orthognathic surgery (Le Fort I osteotomy and bilateral sagittal split ramus osteotomy) in the Department of Oral and Maxillofacial Surgery at the Suidobashi Hospital, Tokyo Dental College between January 2014 and December 2016 were included. Using the patients’ medical and operative records, the number of cases according to sex, age at the time of surgery, body mass index (BMI), circulating blood volume, diagnosis of maxillary deformity, direction of maxillary movement, operative duration, incidence of bad split, injury of nasal mucosa, and blood type were analyzed. Results: The results revealed that BMI, circulating blood volume, nasal mucosal injury, and operative time were associated with the risk of intraoperative massive bleeding in orthognathic surgeries. Chi-square tests and binomial logistic regression analyses showed significant differences in BMI, circulating blood volume, direction of maxillary movement, operative duration, and injury to the nasal mucosa. Operative duration emerged as the most important risk factor. Furthermore, a >4-mm upward migration of the posterior nasal spine predicted the risk of massive bleeding in orthognathic surgery. Conclusions The upward movement of the maxilla should be recognized during the preoperative planning stage as a risk factor for intraoperative bleeding, and avoiding damage to the nasal mucosa should be considered a requirement for surgeons to prevent massive bleeding during surgery.

Objective: Direct oral anticoagulants (DOACs) are increasingly being used for the treatment of cancer-associated venous thromboembolism (CAT). However, there is limited evidence of the efficacy of DOACs for the treatment of gynecological CAT. Thus, this study aimed to investigate the efficacy and safety of edoxaban for the treatment of gynecological CAT using Japanese real-world data. Methods: We reviewed the medical records of patients with 371 gynecological cancer who received edoxaban or vitamin K antagonist (VKA) between January 2011 and December 2018. Results: Altogether, 211 and 160 patients were treated with edoxaban and VKA, respectively. Fourteen patients (6.8%) in the edoxaban group and 22 (13.8%) in the VKA group showed recurrence of venous thromboembolism (VTE). Cumulative VTE recurrence was not significantly different between the 2 groups (p=0.340). Adverse events occurred in 15 (7.1%) and 11 (6.9%) patients in the edoxaban and VKA groups, respectively (p=0.697). Subgroup analysis of the edoxaban and VKA groups according to different tumor types, including ovarian, endometrial, and cervical cancer, showed equivalent outcomes in terms of VTE recurrence and adverse events. Patients without pulmonary embolism (PE) were mostly omitted from initial unfractionated heparin (UFH) therapy prior to administration of edoxaban. However, this did not increase the recurrence of VTE. Conclusion This study confirmed that edoxaban is effective and safe for the treatment of gynecological CAT. This finding was consistent for different types of gynecological cancer. Additionally, initial UFH therapy prior to the administration of edoxaban may be unnecessary for patients without PE.