OBJECTIVE: To explore the effects of wind and dampness pathogens on cytokines in the lung tissue of rats with cold syndrome due to different gradient cold pathogens. METHODS: One hundred and four Wistar rats of SPF grade were randomly divided into 13 groups: normal temperature group, six cold pathogen groups and six cold plus wind-dampness pathogen (wind of grade 5 and 90%-100% relative humidity) groups. The cold pathogens were constant low temperature (including 10 degrees C, 0 degree C, -10 degrees C) and temperature change (including 20 to 10 degrees C, 20 to 0 degrees C, and 20 to -10 degrees C). The rats in different groups were kept in a temperature-controlled box under the corresponding condition for 2 hours on the first day of experiment. Then, the rats were all raised in normal temperature for 4 days and the rats' behaviors were observed. The contents of tumor necrosis factor alpha (TNF-alpha), interleukin-6(IL-6) and interleukin-4 (IL-4) in lung homogenate were measured by radioimmunoassay and the content of interferon-gamma (IFN-gamma) was detected by enzyme-linked immunosorbent assay. RESULTS: In comparison with cold pathogen groups, contents of TNF-alpha, IL-6 and IL-4 were obviously increased in lung homogenate of rats in cold plus wind-dampness pathogen groups (P<0.01), and the content of IFN-gamma and IFN-gamma/IL-4 ratio were obviously decreased (P<0.01). CONCLUSION: Wind-dampness pathogen can seriously aggravate the injury to lung tissue caused by cold pathogen, and the unbalance of Th(1)/Th(2) in lung homogenate of rats.

Objective To evaluate the efficacy of self?made breathing circuit joint for intermittent positive pressure ventilation ( IPPV) in patients with central airway obstruction undergoing interventional fi?beroptic bronchoscopy ( FOB) . Methods Sixty?two patients of both sexes with central airway obstruction requiring tracheal intubation, aged 60-80 yr, with body mass index of 20-26 kg∕m2 , of American Society of Anesthesiologists physical status Ⅲ or Ⅳ and Medical Research Council dyspnea scale grade Ⅲ or Ⅳ, undergoing interventional FOB under general anesthesia, were divided into 2 groups ( n=31 each) using a random number table:high frequency jet ventilation ( HFJV) group and IPPV group. The patients were tra?cheally intubated after induction of general anesthesia. The self?made breathing circuit joint was connected, then the anesthesia machine was connected to perform IPPV, and the ventilator settings were adjusted to maintain the end?tidal pressure of carbon dioxide 35-45 mmHg in group IPPV, and HFJV was used in group HFJV. Before induction ( baseline) , at 10, 20, 30 and 40 min after start of operation, and at the end of operation, arterial blood samples were collected for blood gas analysis, the pH value, arterial oxy?gen partial pressure, and arterial carbon dioxide partial pressure were recorded. The development of hyper?capnia was recorded. Results Hyoxemia was not found in the two groups. The incidence of hypercapnia was 74%, and in addition the incidence of severe hypercapnia was 10% in group HFJV. The incidence of hypercapnia was 16%, and all the patients presented with permissive hypercapnia in group IPPV. Com?pared with group HFJV, the incidence of hypercapnia was significantly decreased, and the pH value and arterial oxygen partial pressure were increased, and arterial carbon dioxide partial pressure was decreased from 10 min after start of operation to the end of operation in group IPPV (P<0.05). Conclusion The self?made breathing circuit joint provides better efficacy than HFJV when used for IPPV in the patients with central airway obstruction undergoing interventional FOB.

Objective : To explore the influence of apical dense bone islands on tooth movement during orthodontic treatment and its complications, and to provide a reference for orthodontic clinical treatment. Methods : This study obtained approval from the hospital ethics committee. A retrospective analysis was conducted on 33 patients with apical dense bone islands who received full-mouth fixed orthodontic treatment in the Orthodontics Department of Huizhou Stomatological Hospital from 2018 to 2022. Cone-beam CT (CBCT) was used to determine the location, distribution, and wrapping severity of the apical dense bone islands before treatment. The number of loose teeth located in the apical dense bone islands and the degree of external apical root resorption in the apical area of teeth were analyzed before treatment, immediately after treatment, and 12 months after treatment. Results: There were 33 orthodontic patients (aged 11 to 42 years, with an average age of 16.7 years and a median age of 15 years) included in this study, including 12 males (36.4%) and 21 females (63.6%). All apical dense bone islands involved a single tooth located in the mandible, mainly in the premolar-molar area. No gender differences were present in the location of the dense bone islands (P>0.05). The apical dense bone islands were mildly wrapped in 23 cases (69.7%), moderately wrapped in 10 cases (30.3%), and severely wrapped in no cases. No difficulty in tooth movement or incomplete closure of extraction space was found in the apical dense bone islands with different degrees of wrapping during orthodontic treatment. For teeth located in apical dense bone islands, 1 patient (3.0%) had loose teeth before treatment, 6 patients (18.2%) had loose teeth after treatment, and 2 patients (6.1%) had loose teeth 12 months after treatment. The number of patients with grade I loose teeth increased after treatment and 12 months after treatment. There was a statistically significant difference in the number of loose teeth before and after treatment (P<0.05), no statistically significant difference in the number of loose teeth before treatment and 12 months after treatment (P>0.05), and no statistically significant difference in the number of loose teeth after treatment and 12 months after treatment (P>0.05). After treatment, apical dense bone islands showed mild resorption in 26 cases (78.8%), moderate resorption in 7 cases (21.2%), and severe resorption in no cases. The apical dense bone islands showed mild resorption in 25 cases (75.8%), moderate resorption in 8 cases (24.2%), and severe resorption in no cases 12 months after treatment. For the severity of root resorption, there was a statistically significant difference between before and after treatment (P<0.05) as well as between before treatment and 12 months after treatment (P<0.05). However, no statistically significant difference was observed between after treatment and 12 months after treatment (P>0.05). Conclusion Apical dense bone islands were not found to affect tooth movement during orthodontic treatment. After orthodontic treatment, the number of loose teeth increased and mild-to-moderate tooth external apical root resorption occurred, which may be a potential risk of external apical root resorption. Thus, it is recommended to pay close attention during the orthodontic process.

【Objective】 To assess the effect of reconstruction kernels and window settings on the detection and measurement of pulmonary solid nodules and their measurement variability and repeatability. 【Methods】 We retrospectively recruited 49 patients with pulmonary solid nodules who had undergone low-dose CT scanning. Images were reconstructed using five reconstruction kernels： lung， bone， chest， detail and standard kernels. Two radiologists independently assessed the detection rate， diameter and CT number measurement of nodules under the five kernels and two window settings （lung-window and mediastinal-window）. Bland-Altman plots and relative average deviation （RAD） were used to evaluate the repeatability and variability of nodule diameter and CT number measurement. 【Results】 Seventy-seven nodules were detected on lung-window regardless of reconstruction kernels， while the detection rates （75.3%-98.7%） were significantly different （P<0.001） on the mediastinal-window， with the lung kernel significantly improving the detection of nodules with the diameter below 6 mm. In both display windows， the diameter and CT number measurements among reconstruction kernels were similar except for the lung kernel. The lung-window had better variability in the diameter measurement while mediastinal-window was better in CT number measurement among various reconstruction kernels. Although the variability in the diameter of the nodule on the lung-window and mediastinal-window was similar， there was a significant difference in the variability in the diameter measurement among different reconstruction kernels on the mediastinal-window （P=0.004）. No significant difference in the variability in the CT number measurement was found among the different reconstruction kernels （lung-window P=0.163； mediastinal-window P=0.201）， and the variability in the CT number measurements on the mediastinal-window was smaller than that of the lung-window. Both window displays had acceptable repeatability in diameter and CT number measurement； however， the mediastinal-window was better in CT number measurement. 【Conclusion】 The lung kernel can improve the detection of pulmonary solid nodules below 6 mm， but is limited in the CT number measurement. The lung-window display provides better variability in measuring nodule diameter， while mediastinal-window display is better at measuring CT numbers.

【Objective】 To investigate the value of deep learning image reconstruction (DLIR) in improving image quality and reducing beam-hardening artifacts of low-dose abdominal CT. 【Methods】 For this study we prospectively enrolled 26 patients (14 males and 12 females, mean age of 60.35±10.89 years old) who underwent CT urography between October 2019 and June 2020. All the patients underwent conventional-dose unenhanced CT and contrast-enhanced CT in the portal venous phase (noise index of 10; volume computed tomographic dose index: 9.61 mGy) and low-dose CT in the excretory phase(noise index of 23; volume computed tomographic dose index: 2.95 mGy). CT images in the excretory phase were reconstructed using four algorithms: ASiR-V 50%, DLIR-L, DLIR-M, and DLIR-H. Repeated measures ANOVA and Kruskal-Wallis H test were used to compare the quantitative (skewness, noise, SNR, CNR) and qualitative (image quality, noise, beam-hardening artifacts) values among the four image groups. Post hoc comparisons were performed using Bonferroni test. 【Results】 In either quantitative or qualitative evaluation, the SNR, CNR, overall image quality score, and noise of DLIR images were similar or better than ASiR-V 50%. In addition, the SNR, CNR, and overall image quality scores increased as the DLIR weight increased, while the noise decreased. There was no statistically significant difference in the distortion artifacts (P=0.776) and contrast-induced beam-hardening artifacts (P=0.881) scores among these groups. 【Conclusion】 Compared with the ASiR-V 50% algorithm, DLIR algorithm, especially DLIR-M and DLIR-H, can significantly improve the image quality of low-dose abdominal CT, but has limitations in reducing contrast-induced beam-hardening artifacts.

The interventional therapy of vascular stent implantation is a popular treatment method for cardiovascular stenosis and blockage. However, traditional stent manufacturing methods such as laser cutting are complex and cannot easily manufacture complex structures such as bifurcated stents, while three-dimensional (3D) printing technology provides a new method for manufacturing stents with complex structure and personalized designs. In this paper, a cardiovascular stent was designed, and printed using selective laser melting technology and 316L stainless steel powder of 0-10 µm size. Electrolytic polishing was performed to improve the surface quality of the printed vascular stent, and the expansion behavior of the polished stent was assessed by balloon inflation. The results showed that the newly designed cardiovascular stent could be manufactured by 3D printing technology. Electrolytic polishing removed the attached powder and reduced the surface roughness Ra from 1.36 µm to 0.82 µm. The axial shortening rate of the polished bracket was 4.23% when the outside diameter was expanded from 2.42 mm to 3.63 mm under the pressure of the balloon, and the radial rebound rate was 2.48% after unloading. The radial force of polished stent was 8.32 N. The 3D printed vascular stent can remove the surface powder through electrolytic polishing to improve the surface quality, and show good dilatation performance and radial support performance, which provides a reference for the practical application of 3D printed vascular stent.
Humans ; Stainless Steel ; Powders ; Cardiovascular System ; Constriction, Pathologic

ObjectiveLipopolysaccharide （LPS）-induced zebrafish inflammation model was used to evaluate the anti-inflammatory activity of different extracts from Lianggesan （LGS） and its component Glycyrrhiza Radix et Rhizoma. MethodDifferent polar fractions of LGS and Glycyrrhiza Radix et Rhizoma were obtained by the principle of similar miscibility. For toxicity observation， the zebrafish （3 day-post-fertilization） was exposed to different concentrations of extracts for 24， 48 and 72 h. The yolk sac of the zebrafish was microinjected with 0.5 g·L^-1 LPS to establish the inflammation model， and then the embryos were soaked with different concentrations of extracts to observe their survival status at 72 h and the aggregation of neutrophils in yolk sac at 12 h after treatment. Hematoxylin-eosin staining was used to analyze the yolk sac of the zebrafish microinjected with LPS. Quantitative Real-time polymerase chain reaction （Real-time PCR） was performed to further investigate the anti-inflammatory effects and mechanisms of LGS and Glycyrrhiza Radix et Rhizoma. ResultThe toxicity of LGS and Glycyrrhiza Radix et Rhizoma was decreased with the increase of polarity， and the descending order was petroleum ether>ethyl acetate>n-butanol>water. Compared with model group， the extracts from different fractions of LGS and Glycyrrhiza Radix et Rhizoma prolonged the survival time of the zebrafish， and inhibited the recruitment and aggregation of neutrophils and decreased the infiltration of inflammatory cells in the yolk sac， among which the water fraction of LGS and the ethyl acetate fraction of Glycyrrhiza Radix et Rhizoma had the most significant effect （P<0.01）. In addition， compared with model group， the water fraction of LGS and the ethyl acetate fraction of Glycyrrhiza Radix et Rhizoma down-regulated the mRNA expression of interleukin-6 （IL-6） and tumor necrosis factor-α （TNF-α）， and suppressed the expression of toll like receptor 4 （TLR4） and nuclear factor kappa-B （NF-κB） in LPS-stimulated zebrafish （P<0.01）. ConclusionThe extracts from different fractions of LGS and Glycyrrhiza Radix et Rhizoma exerted protective effects in LPS-induced zebrafish by inhibiting the TLR4 and NF-κB signaling pathways. Moreover， in zebrafish model， the method of administration by soaking was applicable to the high-throughput screening of anti-inflammatory Chinese medicine， which was suitable for the evaluation of anti-LPS activity of Chinese medicine and the different extracts.