Cervical spinal canal tumors is not rare,accounting for about 15%of all spinal tumors. Due to the particularity of its anatomical location and the severity of operative complications, it is considered as a difficult point in spinal surgery. With the development of imaging medicine and various surgical techniques,many new theories and techniques have been developed. Its overall treatment effect is satisfactory, but the serious surgical complications not rare. This article reviews the progress in treatment of cervical spinal canal tumors, in order to provide a reference for the further improvement of cervical spinal canal tumors treatment .

ObjectiveTo observe the effect of the compound of the allogeneic morselized bone and the calcium phosphate cement on repairing bone defect.MethodsThe rabbit models of bilateral radius bone defect were created. 40 rabbits were randomly divided into group A, group B and group C. Animals of the group A were implanted with the compound of the allogeneic morselized bone and the calcium phosphate cement, group B implanted with allogeneic morselized bone, and group C as blank control implanted nothing. The X-ray examination, histopatholgical examination, vascularization and biomechanics of bone defect were evaluated at 4 and 8 weeks after operation.ResultsThe repair of bone defect, quantity and rate of the new formation bone and biomechanics measurement of the group A were superior than the group B; while, no repair of bone defect was found in the group C.ConclusionThe implantation of the allogeneic morselized bone can repair bone defect, but the effect of implanting the compound of the allogeneic morselized bone and the calcium phosphate cement is better than the former.

Objective To study the expression of basic fibroblast growth factor (bFGF) in ectopic osteogenesis of autogenetic minimal morselized bone so as to discuss the bone formation of minimal morselized bone. Methods All 48 rabbits were divided into two groups randomly. Then autogenetic minimal morselized bone and bulk bone were implanted into the muscle bag models of gluteus maximus muscle respectively. Samples were harvested on day 1,3,5,7,11,14,21 and 28 postoperatively and tested by the methods of histology, immunohistochemistry (IHC) and in situ hybridization (ISH). Results (1) The morselized bone grew faster than the bulk bone and was replaced by neonatal bone on the 28th day. In the group of bulk bone, the ability of osteogenesis was weaker dominated by bone absorption. (2) In the morselized bone group, the expression peaks of bFGF and bFGFmRNA appeared at day 5-7 postoperatively, mainly appeared in the mesenchymal cells, fibroblast, chondrocyte and osteoblast by the method of IHC and ISH. While in the group of bulk bone, the expressions of bFGF and bFGFmRNA were similar to those in the morselized bone group. The difference between the two groups was significant ( P

[Objective]To study cervical hollow threaded autograft cortical bone fixator with morselized bone for cervical anterior interbody fusion.[Method] Eighteen sheep were underwent cervical anterior discectomy and fusion with a hollow threaded and fenestrated tibial cortical hone fixator filled with morselized bone(diameter of 300～500 um) for C5、6 or autogenous iliac crest bone cylinder or C3、4 respectively.Cervical spines were radiographed immediately after surgery and 1,2,3 months later,the specimens of C5～6 and C3～4 were taken for histology investigation and biomechanical test respectively.[Result] Interbody fusion was achieved 3 months after surgery in experimental gronp and all but one in control group,with statisticdly significant difference was found between two groups in biomechanical compression and torsion tests of ante or post-fatigue test(P

Objective To study the efficacy of repairing bone defect with the composite of allogeneic morselized bone, bone morphogenetic protein(BMP)and collagen. Methods 1.5 cm long bone defect was created in each radius of 34 New Zealand rabbits. A composite of 200mg allogeneic minute morselized bone with 10 mg BMP and 0.2 ml collagen was placed into the bone defect of left radius in each rabbit (group A); the contralateral bone defect was filled with a composite of 200 mg allogeneic morselized bone and 0.2 ml collagen (group B). The bone mineral density(BMD)of the defects was evaluated at 8 and 12 weeks. The biomechanic tests were examined at 12 weeks. In group C, only 0.2 ml collagen was implanted as control. Results Radiological and histological examination revealed that the defects healed completely in both experimental groups, but there were more new bone formation, early bridging and rapid healing in group A compared with that of group B. The value of BMD in group A was higher than that in group B. The three-points bending test of group A showed that ultimate strength and bending stiffness were superior than that of group B, the anti- axial compressive stiffness as well; and the torsion rigidity and maximal torque of group A were also greater than that of group B. There were significantly statistic differences in all biomechanical tests between the two groups. Histological evaluations displayed that there were significant differences in matured level of new bone formation and remodeling process between two experimental groups. The new lamellar cortical bone formation was more matured, and the remodeling process was more perfect in group A comparing to that of group B, which might contribute to the better mechanical properties of group A. The defects did'nt achieve any osseous healing in control group. Conclusion The allogeneic morselized bone can be used effectively to repair segmental bone defects. The experiment suggests that the bone healing process can be promoted by the composite morselized bone graft with BMP and collagen.

The vast majority of vertebral compression fractures are caused by osteoporosis and vertebral tumor,which lead to the pain of a fracture and intervertebral height lost.In recent 20 years,the use of percutaneous vertebroplasty and percutaneous kyphoplasty,a kind of minimally invasive surgery method intended for the vertebral compression fractures,are rising up for patients with vertebral compression fractures,which can quickly relieve patients' pain and restore injured vertebral deformities.Percutaneous vertebroplasty injects bone cement into fractures through a small incision.However,percutaneous kyphoplasty injects a balloon into a fracture to make a cavity by expending and shrinking,which is filled with filler material,and then removes the balloon,and injects bone cement.This article mainly reviews development,curative effect and safety,clinical application and future aspects.of the percutaneous vertebroplasty and percutaneous kyphoplasty.

Objective To investigate the changes of adhesion molecules and their effects on skeletal muscle ischemia/reperfusion injury. Methods 42 Wistar rats were divided into 3 groups: normal control group (Group Ⅰ, n=6), ischemia group (Group Ⅱ, n=6),ischemia/reperfusion injury group (Group Ⅲ, n=30). The level of malondialdehyde (MDA) in the plasma, myeloperoxidase (MPO) in the skeletal muscle, CD11b/CD18 on the leukocytes, intercelluar adhesion molecule-1 (ICAM-1) in the skeletal muscle and the histological changes were studied 1 h, 2 h, 4 h, 8 h, 12 h reperfusion after ischemia for 4 h. Results In group Ⅲ, the expression of CD11b/CD18, ICAM-1 and the injury of skeletal muscle increased with the lapse of reperfusion time. They reached the peak at 8～12 hours' reperfusion. The injury of skeletal muscle developed with the expression of adhesion molecules. Conclusion The expression of CD11b/CD18 and ICAM-1 are significantly associated with the skeletal muscle ischemia-reperfusion injury.

Objective To study the different biomechanics surgical effects of posterolateral fusion , the transverse fusion and the interbody fusion. Method Scan CT was followed with preprocess of images. The Mimics , HyperMesh and Geomagic Studio Reverse engineering softwares were used to establish the modles of lumbar fusion , then the finite element computation was conducted by using the Abaqus finite element software. Result The EF of each lumbar modle was established , the EF of the interbody fusionwas rised evidently. After the fusion , the stress of the adjacent lumbar were also rised, among them the stress of the upper adjacent segment in tnterbody fusion was the most in extension and rotation , with statistical significance ( P < 0 . 05 ) . In the antexion the stress of the transverse fusion was the most, and the new type of posterolateral fusion least, three of them all hadstatistical significance (P<0.05). In the lateral flexion, they had no statistical significance (P>0.05). About the under adjacent sengment, in the extension and antexion, the stress of the interbody fusion was the most, and the new type of posterolateral fusion was the least, the three of them all haved statistical significance (P<0.05, respectively). In the rotation and lateral flexion, with no statistical significance (P>0.05). Conclusion After the fusion, the EF of the lumbar and the stress of the lumbar disc are all established, the interbody fusion is most, while the others are lower.

Objective:To optimize the extraction process of total flavonoids in Gynostemma pentaphyllum by the method of response surface analysis ( RSM) . Methods: Based on the choice of factors and levels according to the results of single factor test, Box-Be-hnken response surface experiment was designed with the extraction rate of total flavonoids as the index to obtaln the best operation con-ditions and two equations of the response surface model. Results: The optimal extraction conditions of total flavonoids in Gynostemma pentaphyllum were as follows:the volume fraction of ethanol was 71%, the ratio of solid to liquid was 1∶14, and the ultrasonic time was 32 min. Under the conditions, the model predictive value of extraction rate of total flavonoids in Gynostemma pentaphyllum was 4. 676%, and the extraction rate in the verification test was 4. 641%. Conclusion:The fit of the regression model is good, and the ex-traction technology is feasible and reliable.

Objective To construct the recombinant adenovirus vector with hTERT-HSV-TK and observe the killing effect of Ad-hTERTp-HSV-TK/GCV system on hepatocellular carcinoma cells. Methods A recombinant replication defective adenoviral vector of Ad-hTERTp-HSV-TK was constructed via homologous recombination which both shuttle plasmid pSU-Tp-TK and adenovirus backbone plasmid pBHGE3 transfected into the HEK293 packaging cells. Then the Ad-hTERTp-HSV-TK was amplified and purified through PCR. The activity of the HepG2 cells and the L-02 cells were tested by methyl thiazolyl terazolium (MTT) after they were transfected by the recombinant adenovirus of different multiplicities of infection (MOI) and then were added GCV of different conc.entration. Results The recombinant replication defective adenoviral vector of Ad-hTERTp-HSV-TK were identified by PCR successfully. The viral titer was 1.5×1010 pfu/ml after amplification and purification. The HepG2 cells were targetedly suppressed by Ad-hTERTp-HSV-TK/GCV system. The survival rate of cells decreased gradually along with the increase of the MOI and the GCV' s concentration. Conclusion The recombinant replication defective adenoviral vector of Ad-hTERTp-HSV-TK can inhibit the HepG2 cells significantly, but has not influence on the L-02 cells.