Objective To introduce a finger leaf design that is applied to dual layer MLCs.Methods An optimization model was firstly constructed to describe the problem of determining leaf end shapes,and the corresponding problems were then solved by the simplex search method or the simulated annealing technique.Optimal parameters for arc shapes of leaf end projections were obtained,and a comparison was done between optimized MLCs and conventional MLCs in terms of field conformity.The optimization process was based on 634 target fields selected from the patient data base of a treatment planning system.Areas of these fields ranged from 20.0 to 602.7 cm with a mean and its standard deviation of (125.7 ±0.0) cm~2.Results The optimized leaf end shapes projected to the isocenter plane were semicircles.With the finger leaf design,the total area of discrepancy regions between MLC fields and target fields was reduced by 32.3% .Conclusions The finger leaf design improves the conformity of the MLC shaped fields to the desired target fields.

Niclosamide is the most commonly used molluscicide. Along with a lot of application of niclosamide more and more scientists studied its toxic effects to aquatic organisms as well as the related cell toxicity mechanism. This paper summariz?es the toxicity on cell organelle enzyme cell signaling pathway and genetic material caused by niclosamide and puts for?ward the future research direction.

Purpose: To analyze factors which influence the precision & accuracy of target positions in Alderson Head phantom and(or) patients.Materials and Methods: A target position simulator was used to determine the precision and accuracy of target localization while Alderson head phantom used to determine the overall precision and accuracy through the treatment procedure.Results: The overall precision and accuracy through the treatment procedure was found to be 1.72?0.60mm, and its contribution from CT localizing step, which was 1.4?0.3mm。Conclusion: Since there are more factors related to patients' treatment, the precision and accuracy of simulating in Alderson phantom is the best estimate for patient treatment.

Objective To evaluate the improvement of cone beam CT (CBCT) image quality by using bewtie filter (F_1) and water calibration. Methods First the multi-level gain calibration of the detector panel with the method of Cal_2 calibration was performed, and the CT images of CATPHAN503 with F_0 and bowtic filter were collected, respectively. Then the detector panel using water calibration kit was calibrated, and images were acquired again. Finally, the change of image quality after using F_1 and (or) water calibration method was observed. The observed indexes included low contrast visibility, spatial uniformity, ring artifact, spatial resolution and geometric accuracy. Results Comparing with the traditional combination of F_0 filter and Cal_2 calibration, the combination of bowtie filter F_1 and water calibration improves low contrast visibility by 13.71%, and spatial uniformity by 54. 42%. Water calibration removes ring artifacts effectively. However, none of them improves spatial resolution and geometric accuracy. Conclusions The combination of F_1 and water calibration improves CBCT image quality effectively. This improvement is aid to the registration of CBCT images and localization images.

Objective To design leaf patterns for Multileaf Collimator(MLC)routine quality assurance(OA)with a 2D diode array.Methods According to the detector distribution characteristic of the 2D diode array and basillg on the"picket fence"pattern,design the"stepwise"pattern.For each diode involving MLC QA,a calibration curve of relative output versus leaf positioning error was measured through delivering a set of patterns with different intentionally introduced positioning errors.When this proposed technique was delivered,the referenced patterns were exposed,and the calibration curves were used as a mean to quantitative determination of the leaf possible positioning errors through the detector readings.Results Compared with the"picket fence"pattern,the"stepwise"pattern not only had a high detecting efficiency,but also increased the dosimetric sensidvity to leaf positioning error.A 1 mm Ieaf positioni.error corresponds to a dose variation of 25% for the"stepwise"pattern,while for the"picket fence"pattern the same positioning error just causes a 17% dose vailation.Conclusions The new"stepwise"pattern is more efficient to be carried out,and more sensitive to sub-millimeter changes of leaf positioning.

Biogenic molluscicides refer to the use of plants,animals and micro?organisms or their metabolites,and synthesis biomimetic molluscicides to kill Oncomelania hupensis snails. With the rapid development of science and technology,new bio?genic molluscicides are continuously emerging and the category also continues to expand. According to the molluscicidal active ingredient and sources,at present,the biogenic molluscicides with in?depth studies include plant?derived molluscicides,micro?organism molluscicides,microbial metabolite molluscicides and animal molluscicides. This paper reviews the advances in the re?searches of biogenic molluscicides in recent years.

Objective To investigate the molluscicidal effect of 5%niclosamide ethanolamine granules against Oncomela-nia hupensis in a marshland field. Methods The 5%niclosamide ethanolamine granules were sprayed at a dose of 40 g/m2 on 3 snail-breeding marshlands in Yangzhong City of Jiangsu Province to assess its field molluscicidal actions while 26%suspension concentrate of metaldehyde and niclosamide MNSC) at a dose of 4 g/m2 and fresh water served as controls. Results After seven days spraying, 5%niclosamide ethanolamine granules resulted in a of snail mortal85.42%ity while the mortality rates of snails were 82.35% and 2.86% in the MNSC and water control groups respectively. Conclusion 5% niclosamide ethanol-amine granules exhibit a high molluscicidal activity which is suitable to be used in the mashland.

Objective:Through the discussion on the purchasing mode of hospital equipment in China, fully understand the advantages and disadvantages of various procurement ways, choose reasonable acquisition method, optimize acquisition method, standardize the procurement management objective.Methods: By using the method of analogy, comparison of the four main acquisition methods. By the comparative analysis, the scope of each purchase way was confirmed. Results: Public bidding was better for more than 500000 yuan or the treasury payment items, competitive negotiation approach applies to 50000 yuan-500000 yuan purchase project. Consultation approach can be applied to 50000 yuan purchase project. Information project procurement preferred to methods of government procurement.Conclusion: Reasonable choices of purchasing and proper optimization has significant meaning for equipment purchasing and management in hospital.

Objective To commission a Mobetron intra-operative mobile accelerator and analyze the characteristics of its electron beams. Methods The dosimetrie characteristics of the electron beams genera-ted by Mobetron accelerator were measured and compared with those generated by conventional accelerator (Primus, Siemens). M oberton accelerator can generate electron beams of nominal energies of 4,6,9 and 12 MeV. The measurement items were as followings : percentage depth dose perpendicular to water phantom sur-face and beam profiles parallel to water phantom surface, output factors, applicator leakage, electron beam at-tenuation made by lead blocks,and machine output calibration. The measurement devices included a three-dimensional ( 3 D) water scanning phantom, an electrometer, a 0.6 cm3 Farmer ionization chamber, a parallel-plate ionization chamber and solid water slabs. During measurement, all applicators of different tilt angles and diameters were attached to the machine head,and their ends were adjusted to be tangent to the phantom surface. Results Except for the 12 MeV,skin dose for all energies was no more than 90%. The skin dose was higher for Mobetron accelerator electron beams than for regular electron beams. The Dmax depth in water for a 10 cm flat applicator were 0.7,1.3,2.0 and 2.2 cm for the 4 energies,respectively. The depths of 90% dose were 1.0,1.8,2.7 and 3.6 cm, respectively. The selected flat applicator was just 1 cm larger than the tumor bed. But for the beveled applicators,the field flatness and symmetry became worse,and con-sequently,the applicator size had to be selected based on the isodose distribution. The leakage dose at 1 cm outside the applicator was 1.2% ,5.1%, 10.0% and 9.1%, respectively. The lead thickness for full block was 1.5,3.0,4.5 and 6.0 mm,respectively. Conclusions Through the commissioning of Mobetron accel-erator, the machine characteristics are understood, and the data for clinical implementation and routine quality assurance are acquired.

Objective To perform an acceptance test for the IMRT system with independent collimator. Methods An ion chamber dosimeter were used to measure the startup characteristics of the accelerator and the absolute dose at isocenter and given characteristic points for three clinical cases ( a lower nasopharyngeal carcinoma, a lung cancer and a cervical cancer). The characteristic points represented the organs at risk or the target. A Mapeheck2 was used to measure dose maps of basic test fields and the treatment fields for the clinical cases. The basic test fields were as follows: 1 ). Symmetric fields in size of 2 cm ×2 cm, 5 cm ×5 cm, 10 cm× 10 cm, 20 cm ×20 cm, 2 cm × 10 cm, 10 cm ×2 cm, 5 cm ×20 cm and 20 cm ×5 cm;2). Asymmetric fields in size of 2 cm ×2 cm (x1 =4 cm, y1 = 10 cm;x2 = -2 cm, y2 = -8cm) and 5 cm ×5 cm (x1 = -2 cm, y1 = -5 cm;x2 =7 cm, y2 = 10 cm) ;3) A 20 cm ×20 cm composite field composed of five 20 cm× 4 cm narrow bar fields side by side. Gamma Index was used to compare calculated and corresponding measured dose distributions. When the criterion was 3% dose difference or 3 mm distance-to-agreement, the pass rate was required to be more than 90%. Results The accuracy of machine output was better than 2% when machine monitor units increased to 4. Among all basic test fields and all the treatment fields of three clinical cases, the maximal absolute dose error was -3.67%, and only the composite test field and two treatment fields of the lower nasopharyngeal carcinoma case had a pass rate slightly less than 90%, which were 83.6%, 88. 3% and 89. 7% ,respectively. For the three clinical cases the treatment delivery times were 15, 14, and 27 minutes, respectively. Conclusions The overall commissioning results are acceptable, and the system can be used in clinic.