Objective To investigate the expression of Na+/H + exchanger isoform-1 (NHE-1) during ischemia-reperfusion (IR)in rat lung tissue and determine whether cariporide preconditioning protects lung from inflammatory injury via inhibiting NHE-1 protein expression.Methods Twenty i-solated perfused lungs were randomly divided into 4 groups:the lungs in control group (group C) were continuously perfused for 120 min;the lungs in group IR were subjected to 30 min perfusion, followed by 60 min ischemia and 30 min reperfusion;in group LiCl preconditioning,the lungs were preconditioned with LiCl for 30 min,then continuously perfused for 90 min;in cariporide precondi-tioning+IR (CIR)group,the lungs were preconditioned with cariporide for 30 min,following 60 min ischemia and 30 min reperfusion.After reperfusion,the NHE-1 protein expression was determined by immunohistochemistry and the histopathologic change and pathology scores were ascertained from HE sections.Results The NHE-1 protein expression in lung tissue in groups IR and LiCl were signifi-cantly increased compared with groups C and CIR (P <0.05),and there was no difference between groups C and CIR.Histological examination revealed marked inflammatory changes in groups IR and LiCl,whereas no significant changes in lungs of groups C and CIR.The pathology score of lung in groups IR and LiCl were higher than that in groups C and CIR (P <0.05),and there was no differ-ence between the last two groups.Conclusion IR results in an increased NHE-1 protein expression in rat isolated perfused lung,and the selective NHE-1 inhibitor cariporide could repress the NHE-1 pro-tein expression,thereby decrease the lung inflammatory injury after IR.

BACKGROUND:To decrease operation amount of finite element analysis and increase its clinical practice,previous studies explored the material properties and 10 kinds of material attributes were assigned,which met the requirements of finite element analysis.Moreover,it can be used to calculate bone density.OBJECTIVE:To explore a method for measurement of bone density based on three-dimensional reconstruction and finite element analysis.METHODS:A total of 11 specimens of femoral superior segment were selected.The mass of control group was firstly measured.The experimental groups were treated with thin-slice high resolution CT scan and three-dimensional reconstruction in Mimics 10.0,volume meshing in Ansys,assigned with 10,100 and 400 kinds of material attributes Mimics,exported to Ansys to calculat the volumes of the block elements of every types of material attributes.The mass and the density of the specimens was harvested according to the empirical formula concerning the gray value and the bone density.All results were treated with one-way ANOVA.RESULTS AND CONCLUSION:One-way ANOVA showed that there were no significant differences between control group and experimental groups assigned with 10,100 and 400 kinds of material attributes (P＞0.28),and there were no significantly among the experimental groups (P＞0.8).Results show that the method was able to measure the mass and the density of bone quantitatively,as well as the proportion between compact bone and cancellous bone;to assign 10 kinds of material attributes to three-dimensional model of femur could match the needs for measurements.The results can be used as an initial preparation for the unification of bone density and finite element analysis for osteoporosis.

BACKGROUND:Based on previously theoretical derivation,it thought that assignment with 10 kinds of material attributes to three-dimensional model of bone can match the needs of finite element analysis,however,whether the results is consistent with actual needs to be validated by experimental results.OBJECTIVE:Twelve specimens of femoral superior segment were used for finite element analysis,which were verified with results of biomechanical testing,to explore a reasonable method for material assignment of bone.METHODS:All 12 specimens of femoral superior segment were treated with CT scan,three-dimensional reconstruction in Mimics 10.0 and volume meshing in Ansys.The finite element analysis group was divided into 2 kinds (compact bone and cancellated bone),10,50,100,200,400 kinds of material attributes groups based on the gray value.All models were assigned with material attributes and tested in Ansys for mechanics data of nodes on surface of femoral neck.In biomechanical testing group,12 specimens of femoral superior segment were treated with compressed testing to harvest mechanics data of measuring point same as that of finite element analysis group.RESULTS AND CONCLUSION:The one-way analysis of variance showed that the differences between the biomechanical testing group and finite element analysis group of 2 kinds of material attributes had no obvious significance (P=0.082).Compared to the 10,50,100,200,400 kinds of material attributes group,the difference had no significance (P > 0.39).However,the differences between the 2 kinds of material attributes and the 10,50,100,200,400 kinds of material attributes in the finite element analysis group were obviously difference (P< 0.05),which was no difference in the 10,50,100,200,400 kinds of material attributes (P>0.9).The results demonstrated that to assign 10 kinds of material attributes to three-dimensional model of bone can match the needs of finite element analysis.

Objective To study the effects of early application of integrated traditional Chinese medicine (TCM)and western medicine and massage on the incidence and severity of pneumonia and prognosis in the therapeutic course of infants with cytomegalovirus(CMV)infection infantile cholestatic hepatopathy(ICH)accompanied by gastric volvulus(GV). Methods A prospective randomized controlled trial was conducted. 120 infants 1-6 months old with CMV infection ICH and complicated with GV inpatients were divided into treatment group and control group (each,60 cases). The TCM Lidanheji(consisting of artemisiae capillaris 30 g,weeping forsythia 30 g,Chinese goldthread 5 g,prepared rhubarb 5 g,unpeeled root of herbaceous peony 30 g,cassia 5 g,fruit of citron or trifoliate orange 10 g,large-headed atractylodes 10 g,fruit of Chinese magnoliavine 10 g,pangolin scale 3 g and licorice root 5 g)for oral administration or enema and ganciclovir intravenous injection were given to both groups. In the control group,based on the above treatment,postural and diet therapy,prokinetics(domperidone)were given in cases with GV. The massage treatment was only applied for treatment of GV in treatment group. The pneumonia in both groups was treated in accord to the conventional diagnosis and treatment for infantile pneumonia,bronchiolitis,severe pneumonia and the guide and management of infantile community acquired pneumonia. The total number of cases with pneumonia and its severity occurring before and after treatment in the course of the disease,the clinical therapeutic effects of ICH, GV and infantile pneumonia,the clinical physical signs,biochemical indexes and the time of hospitalization were observed and compared between the two groups. Results Compared with control group,after treatment the curative rate and total effective rate of ICH,GV,infant pneumonia in treatment group were significantly higher〔the curative rate of ICH:83.05%(49/59)vs. 71.93%(41/57),total effective rate:96.61%(57/59)vs. 91.23%(52/57);the curative rate of GV:72.88%(43/59)vs. 51.79%(29/56),total effective rate:96.61%(57/59)vs. 78.57%(44/56);the curative rate of infant pneumonia:81.08%(30/37)vs. 67.44%(29/43),total effective rate:100%(37/37)vs. 100%(43/43),P<0.05 or P<0.01〕. In the treatment group,the total number of cases with pneumonia occurring in the therapeutic course and the incidence of severe pneumonia were significantly less than those in the control group〔the occurrence of pneumonia:12 cases vs. 21 cases,the incidence of severe pneumonia:16.67%(2/12) vs. 42.86%(9/21),P<0.05 or P<0.01〕. The enlargement of liver and spleen,the level of total bilirubin(TBil), direct bilirubin(DBil),total bile acids(TBA)and alanine aminotransferase(ALT)in two groups after treatment were significantly lower than those before treatment,the changes being more marked in treatment group(P<0.05 or P<0.01). The time of stay in hospital in treatment group was remarkably shortened(days:21.32±3.26 vs. 27.38±6.09, P<0.05). Conclusion Early interference with combined TCM and western medicine and massage for treatment of infants with CMV infection ICH accompanied by GV can significantly decrease the incidence of pneumonia and its severity occurring in the disease course,therefore this therapeutic method is beneficial to the treatment and prognosis of infants with CMV infection ICH.

Objective:To evaluate the application value of three-dimensional shear wave elastography(3D-SWE) with quantitative parameters and qualitative analysis of stiff rim sign in differentiating benign and malignant breast masses.Methods:One hundred and seventeen female patients (121 breast masses) admitted to the First Affiliated Hospital of Soochow University from January 2020 to February 2021 were examined by conventional ultrasound, two-dimensional shear wave elastography (2D-SWE) and 3D-SWE. Surgical or puncture pathology were used as the gold standard, the ROC curves of 2D-SWE and 3D-SWE were drawn to obtain the optimal qualitative and quantitative indicators. Afterwards, BI-RADS category was adjusted according to the optimal indicators, which could be used to evaluate the diagnostic value in differentiating benign and malignant breast masses.Results:The area under ROC curve (AUC) of BI-RADS category was 0.846, the sensitivity and specificity were 89.6% and 79.6%, respectively. The AUC value of mass-to-fat elasticity ratio(Eratio) of coronal plane was 0.869, which was the highest among all quantitative parameters and was significantly higher than that of 2D-SWE ( P<0.05). In addition, the AUC value of stiff rim sign of coronal plane was significantly higher than those of 2D-SWE, sagittal plane and transverse plane (All P<0.05). The AUC of combination of stiff rim sign of coronal plane and conventional US was 0.901, which was significantly higher than that using conventional ultrasound alone( P<0.05). Conclusions:Compared with 2D-SWE, Eratio and stiff rim sign of coronal plane of 3D-SWE yield better diagnostic efficiency.Adjusting stiff rim sign coronal plane to BI-RADS category can effectively improve the diagnostic efficiency.

Objective To explore the effect of a new organ preservation solution with HOE642 on the apoptosis of the donor lung from a modified lung transplantation model of rabbits.Methods 24 male rabbits were divided into two groups [low potassium dextran (LPD) group and HOE group],established rabbit models for next 2-h reperfusion using LPD solution or new organ preservation solution.Detected the levles of apoptosis index and caspase-3,the expression of Fas/Fas-L and Bcl-2/Bax.Results Compared with LPD group,HOE group revealed significant lower level of apoptosis index and caspase-3 (P＜0.05),lower expression of Fas/Fas-L and Bax,and higher expression of Bcl-2 (P＜0.05).Conclusion The potential donor lung protective mechanism offered by the new organ preservation solution with HOE642 might be the inhibition of apoptosis via both intrinsic and extrinsic pathways.

Objective:To investigate the clinical manifestations and characteristics of children infected with 2019 novel coronavirus (2019-nCoV) in Wuhan City.Methods:The clinical data of 146 children diagnosed with 2019 novel coronavirus infection by nasopharyngeal swab real-time reverse transcription polymerase chain reaction in Wuhan Children′s Hospital, Tongji Medical College, Huazhong University of Science and Technology from January 21 to February 24, 2020 were retrospectively analyzed. The basic data, clinical symptoms, laboratory examinations, pulmonary imaging, clinical classification, treatment medication and the prognosis of disease were included for analysis.Results:Among the 146 cases, 86 (58.9%) were males and 60 (41.1%) were females, with a median age of 6 years and 10 months.Three cases (2.1%) had a history of underlying diseases, 127 cases (87.0%) had a clear history of infected family clusters, and two cases (1.4%) had a history of exposure with Huanan Seafood Wholesale Market in Wuhan City. The clinical classifications included 20 asymptomatic cases (13.7%), 26 mild cases (17.8%), 99 ordinary cases (67.8%), and one critical case (0.7%). A total of 146 patients were tested positive for nasopharyngeal swabs by 2019-nCoV nucleic acid. Among them, 10 patients had a negative nasopharyngeal swab nucleic acid test before diagnosis, and one of them had a negative nasopharyngeal swab nucleic acid test for two consecutive times. The initial symptoms were mainly fever (59 cases, 40.4%) and cough (52 cases, 35.6%). Thirteen cases (8.9%) showed decreased leukocyte counts and three cases (2.1%) showed decreased lymphocyte counts. In addition, aspartate aminotransferase increased in 23 cases (15.8%), serum creatinine increased in seven cases (4.8%), lactic acid dehydrogenase increased in 26 cases (17.8%), and C reactive protein increased in 38 cases (26.0%). Fifty-nine cases (40.4%) were tested positive for IgM antibody to Mycoplasma pneumoniae. One hundred cases (68.5%) were abnormal in pulmonary imaging and 50 cases (34.2%) presented with multiple frosted glass shadows. All the 146 children were given general treatment, and the antiviral treatment was mainly interferon or interferon combined with oral medication. As of February 24, 2020, 72 cases (49.3%) were discharged from the hospital after reaching the de-isolation standard, with a median length of stay of 10 days, and there was no death case.Conclusions:Children with 2019-nCoV infection in Wuhan City are mainly caused by family aggregation. The clinical classification is mainly ordinary type, and the laboratory examination has no specificity. Specimens could be collected from multiple repeatable sites for 2019-nCoV nucleic acid test in suspected cases. Chest computed tomography has certain value for the diagnosis of children with 2019-nCoV infection. The recent prognosis of the patients is good with general treatment.

The acupoint sensitization theory,a breakthrough in acupuncture and moxibustion over the past two decades,has greatly enhanced the understanding of meridians and acupoints while increasing the effectiveness of clinical diagnosis and treatment in acupuncture and moxibustion practices.The number of studies on surface sensitization site detection for different diseases is increasing.However,systematic sorting and a summary of the detection mode of surface sensitization points are lacking.Therefore,this study categorizes the method of surface sensitization point detection into two modes:pan-scanning and focused scanning.The classification is based on the characteristics of the openness of the research purpose,the precision of the target range,and the degree of variation during detection.The two modes have considerable differences in the exploration efficiency and the presentation of result.The pan-scanning mode can be further subdivided into holistic and localized pan-scanning modes,whereas the focused-scanning mode can be subdivided into fixed-and variable-focused scanning modes.This study analyzes the application scenarios,characteristics,advantages,and limitations of each detection mode and presents opinions on mode selection,mode innovation,and future development directions.This study aims to provide valuable insights and guidance for the follow-up research on surface sensitization site detection of various diseases.

Objective:To observe any effect of electroacupuncture (EA) on the expression of phosphorylated extracellular signal-regulated protein kinase (p-ERK1/2) and phosphorylated cyclic adenosine monophosphate response element binding protein (p-CREB) in the spinal dorsal horns of diabetics experiencing neuropathic pain.Methods:Eight rats were randomly selected from 30 healthy male Sprague-Dawley rats as the normal group (N), and the remaining twenty-two rats were treated with a single high-dose intraperitoneal injection of streptozotocin (STZ) to establish a neuropathic pain model. The rats modeled successfully were randomly divided into a model group (M, n=8) and an EA group ( n=8). In the EA group, electroacupuncture was applied at the bilateral Hou san li and Kunlun acupoints starting on the 15th day after the STZ injection. The daily sessions lasted 30 minutes for 1 week. Body weight (BW), fasting blood glucose (FBG) and paw withdrawal latency (PWL) were observed before the STZ injection and on the 7th, 14th, and 21st days afterward. The expression of p-ERK1/2 and p-CREB in the dorsal horns of the rats′ spinal cords was detected using western blotting. The count of p-CREB-positive cells in the dorsal horns and their co-localization with neurons was detected using immunofluorescence. Results:In comparison with the N group, the average BW of the M group on the 7th, 14th and 21st days after the STZ injection was significantly lower, while the average FBG was significantly higher. There was no significant difference between the M and N groups in the average PWL on the 7th day after the STZ injection, but it had decreased significantly in the M group on the 14th and 21st days. Compared with the M group, the average PWL of the EA group was significantly longer on the 21st day after the injection. The expression of p-ERK1/2 and p-CREB protein in the spines of the M group was significantly higher than in the N group. p-CREB positive cells were more numerous in the M group compared with the N group, while in the EA group they were fewer. P-CREB was co-located with neurons in the spinal dorsal horn.Conclusion:EA can alleviate neuropathic pain effectively, perhaps by inhibiting the expression of p-ERK1/2 and p-CREB in the dorsal horns of the spinal cord.

Objective: To analyze the quantitative relationship between the number of layers of laser pulses and the amount of step in ultra-short pulse laser cutting of cortical bone, optimize the robot's vertical single stepping parameters, and to explore the feasibility of automatic preparation of dental implant cavity using robot controlling ultra-short pulse laser, in order to lay the foundation for automated dental implant surgery. Methods: Eight pig ribs were segmented into to make 16 specimens. Using the robotic surgical system and path planning software independently developed by our group, circular holes with a diameter of 4 mm were cut two-dimensionally in the rib segments to obtain the quantification relationship of the number of laser pulse layers (n) and the depth of two-dimensional (2D) cutting (d). When conducting the three-dimensional (3D) cutting procedure, the number of pulse layers were set to 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 layers, the vertical single step amount was an integer value corresponding to the results of 2D cutting depth, and the number of pulses (n') corresponding to the minimum difference between the theoretical depth of cut and the actual depth of cut was obtained. The n' was taken as the most suitable single step pulse layer, the rib segment was cut, and the depth of single cut was measured while the integer value was taken as the most appropriate vertical single step amount (d'). The vertical parameters of laser single stepping were set as n' layer pulse and d′ μm step size. The 3D cutting produces a cylindrical cavity with a diameter of 4 mm and a height of 2 mm to evaluate the 3D cutting accuracy (the difference between the measured value and the theoretical value of cutting diameter or depth). Ten 4 mm×3 mm implant holes were automatically prepared on the bilateral femurs of 5 Japanese big white rabbits, and ten 4 mm×3 mm implants made by 3D printer were artificially implanted, and the preparation effect of the implant cavities was evaluated. Results: The quantitative relationship curve between the number of laser pulses (n) and 2D depth of cut (d) showed a linear upward trend. The linear fitting obtained the quantitative relation function formula d=9.278 4 n±26.763 0, R²=0.988 9. The optimum number of single step pulse layers was 5 layers, and the vertical single step amount was 50 μm, so as to set the vertical parameters of a single step of a 3D cutting, and the 3D cutting diameter accuracy was (3.98±2.87) μm, with a depth accuracy of (15.42±5.44) μm. Automated preparation of 10 implant cavities on the femur of the rabbit were completed. When the implants were placed into the implant cavities, there was resistance, but they were fully seated and primary stability has been achieved after seating implant placement. Conclusions The method of non-contact automatic preparation of dental implant cavities using robot controlling ultra-short pulse laser is feasible. By optimizing the single cutting process parameters, precise control of laser cutting cortical bone can be realized.