OBJECTIVE:To establish a rapid method for the concentration determination of lamotrigine (LTG) in human se-rum. METHODS:HPLC was adopted after serum samples treated with methanol. The column was Hypersil BDS C18(200 mm×4.6 mm,5μm)with the mobile phase of methanol-KH2PO4(45∶55,V/V)at the flow rate of 1 ml/min,the detection wavelength was 250 nm,and the temperature was 35℃. RESULTS:The linear range of LTG was 0.5-30.0 μg/ml(r=0.999 9). The RSDs of intra-day and inter-day were all less than 5% and the recovery was 101.96%-102.74%. CONCLUSIONS:The method is simple,accurate and fast,and suitable for the monitoring of LTG serum concentration.

Object To supply the basis for the optimal collecting period for Herba Rabdosiae Serrae (HRS). To lay down relevant Standard Operating practice (SOP) in accordance with GAP of Chinese medicinal materials and put them into practice with providing basic researching data. Methods To determine the contents of 2?-hydroxy-ursolic acid in HRS by various collecting periods (cultured under GAP) by RP-HPLC. Chromatographic conditions: Kromasil RP-C_ 18 (250 mm ? 4.6 mm,5 ?m) column;the mobile phase was acetonitrile-0.05% trifluoro-acetic acid solution (70.5∶29.5);the velocity of flow was 0.8 mL/min;column temperature was 25 ℃;and the detection wavelength was at 210 nm. Results In various collecting periods,contents of 2?-hydroxy-ursolic acid in HRS are the highest in the collection of earlier flower of Rabdosia Lophanthoides var. gerardianus (Beutham) H. Hara in August. Conclusion It suggests that HRS be gathered in the leaves luxuriance before blooming.

Objective: To discuss the entry point of clinical pharmacists for providing pharmaceutical care in clinics. Methods:Clinical pharmacists participated in making drug treatment regimen for one child with nephritic type NS combined with hypertension,and provide pharmaceutical care and medical education for the patient. Results: According to the situation of the patient, the treatment regimen was made out, evaluated and adjusted, and ADR was dealt with in time, therefore, the individualized treatment showed obvious effect, and the child was discharged with an improved condition. Conclusion: Clinical pharmacists can participate in clinical treatment with pharmaceutical professional knowledge to ensure safer and more effective drug use in child patients.

Objective To evaluate the expression of human kallikrein10 (KLK10) in different endometrioid tissues and analyse the relationship of KLK10 with ER and PR in endometrioid adenoearcinoma.Methods The expression of KLK10 protein in 12 normal endometria,19 endometrial hyperplasia and 34 endometrial carcinoma were detected by immunohistochemistry.The correlations of the expression of KLK10 protein,ER and PR were analyzed.Results The expression of KLK10 in stage Ⅰ,Ⅱ and Ⅲ were 64.3 ％(9/14),30.0 ％ (3/10),10.0 ％ (1/10),and the difference was statistically significant (P ＜ 0.05).The expression of KLK10 in endometrial carcinoma,normal endometria,endometrial hyperplasia were 66.7 ％ (8/12),33.3 ％(4/12),10.0 ％ (1/10),and the difference was statistically significant (P ＜ 0.05).The expression of KLK10 in G1,G2,G3 were 66.7 ％,33.3 ％,10.0 ％,and the difference was statistically significant (P ＜ 0.05).The positive rate of KLK10 expression was 38.2 ％ and the positive rates of ER and PR expression were 67.6 ％and 55.9 ％,respectively,in 34 endometrial carcinoma.The expression of KLK10 was positively correlated with ER and PR expression (x2 =0.448,P ＜ 0.01).Conclusion Absence or down-regulated expression of KLK10 may play an important role in the formation and development of endometrioid adenocarcinoma.The low expression of KLK10 is correlated with low expression of ER and PR in endometrioid adenocarcinoma.The positive expression of KLK00,ER and PR predicts a better prognosis.

Objective High-density porous polyethylene(Medpor)has been widely used in chin augmentation in recent years.The study aimed to observe the outcomes of clinical use of high-density porous polyethylene implant in chin augmentation in contour plastic surgery of low face.Methods From 2005 to 2008,149 cases of chin augmentations intraorally with Medpor implants combined with were collected.121 of them received bilateral mandibular angle osteotomy and 28 cases received bilateral mandibular angle osteotomy and bilateral malar reduction simultaneously.They wre all females aged from 17 to 46 years.The patients were followed up for 6 to 36 months(average 24 months)and photographs were taken before and after operations.Clinical outcomes were observed and analysed.Resuits 145 patients(97.3%)were satisfied with their chin and contour of low face.2 patients (1.3%)were not satisfied with the projection of their chin,and 1 of them were admitted to take out the implant and received sliding advancement genioplasty.1 patient(0.7 0A)felt the implants was too large to some extent and was admitted to modify the implant.1 patient(0.7%)received genioplasty 6months after operation because of the deviation of the implant.20 patients(13.4%)felt numbness of the lower lip which gradually disappeared 1 to 3 months postoperatively.Complications such as infection,edema and extrusion,break of the implant were not found during the following period.Conclusions Medpor is an excellent biomaterial with good biocompatibility.Simultaneously chin augmentation with Medpor combined with bilateral mandibular angle osteotomy intraorally shows a good result in contour plastic surgery of low face.

Objective To explore the risk and treatment of laparoscopic cholecystectomy(LC) in patients with liver cirrhosis and cholelithiasis.Methods To summarize the clinical data of 28 patients with liver cirrhosis and cholelithiasis.The patients were repeated right upper quadrant pain,including 4 cases of gallbladder neck stones incarcerated,gallbladder effusion.Among them,there were 20 cases of hepatitis B cirrhosis,5 cases of schistosomiasis cirrhosis,3 cases of alcohol.Results There were 6 patients with hemorrhage during operation.Among them,5 patients were treated with gelatin sponge,hemostatic gauze and bio-glue spray to stop bleeding,1 case was transferred to open surgery because of bleeding.The remaining 27 cases of LC were successful.Complications occurred in 8 patients,3 cases of increased liver function abnormalities,1 case of upper gastrointestinal bleeding,1 case of mild hepatic encephalopathy,2 cases of significant ascites formation,1 patient underwent subtotal resection of the gallbladder with Hartmanns bag,and bile was found in the ascites after surgery,but the bile disappeared after five days.All patients with complications after symptomatic treatment were cured,no death,no major bleeding and liver failure,bile duct injury,severe biliary fistula and other serious complications.Conclusion Although the risk of LC in patients with liver cirrhosis is higher than that in the general population,with the help of current high-tech surgical instruments,we can safely accomplish this with an improved surgical procedure.As these patients require high technical requirements of surgery,surgeons must have a wealth of experience and familiar laparoscopic liver and gallbladder anatomy.

OBJECTIVETo investigate the application of three-dimensional CT(3D-CT) in the treatment of oblique facial clefts with mandibular outer cortex, including the surgical design and results assessment.

METHODSFrom Jan. 2003 to Dec. 2013, 22 cases with oblique facial cleft, who underwent mandibular outer cortex onlay bone graft were retrospectively studied. 3D images from CT data were reconstructed before operation for design. Then the mandibular outer cortex onlay bone transplant was performed to reconstruct the bone defect and cleft. 3D CT was performed 5-10 days postoperatively and 6- 12 months postoperatively to assess the facial symmetry.

RESULTSAccording to the results of CT measurement, the average volume of the orbital bone defects on the affected side decreased by(64. 6 ± 14. 4)% 5 to 10 days after operation. The average volume of the maxillary and zygomatic bone defects on the affected side decreased by(71.4 ± 15.7)% after surgery. After 6 to 12 months,the average recovery of the mandibular donor site was (57. 9 ± 13. 9)% of the removed mandibular outer cortex. The average absorption of grafted bones was(24.7 ± 25.6 )%. The average height difference between the centre of pupils on both sides before surgery was(3.76 ± 1.27) mm,which decreased to( 1. 15 ± 1.00) mm 5 to 10 days after surgery(P =0. 000) , and( 1.35 ± 1. 13) mm 6 to 12 months after surgery(P = 0. 003). The relapse may be caused by the absorption of the grafted bones.

CONCLUSIONS3D-CT can be used for preoperative design and postoperative assessment in the treatment of oblique facial cleft with mandibular outer cortex.

Bone Transplantation ; Cleft Palate ; surgery ; Craniofacial Dysostosis ; surgery ; Eye Abnormalities ; surgery ; Facial Bones ; abnormalities ; Humans ; Imaging, Three-Dimensional ; Mandible ; transplantation ; Maxillofacial Abnormalities ; surgery ; Retrospective Studies ; Tomography, X-Ray Computed ; methods ; Transplant Donor Site

Objective: To discuss the establishment of three-dimensional mirror image plane ofhemifacial microsomia. Methods: 32 cases of hemifacial microsomia from Jan. 2006 to Jan. 2017 were collected in our hospital. CT scanning was performed for all patients. Then, the deformity characteristics were summarized through three steps: 3D reconstruction, mirror and discrepancy analysis. Results: After statistical analysis, the stability of these three points was good. Clinical result showed that the patient′s appearance was greatly improved. Conclusions Using these three points to determine the mirror image plane is helpful to analyze the patient's facial features and facilitate the surgical design.

Objective To aesthetically evaluate the mandible,to position the gonion landmark of the aesthetic female with digital techniques and to establish three-dimensional mandibular measurements database of the aesthetic female.Methods 14 aesthetic volunteers were chosen by plastic surgeons and ordinary people based on the identical view of esthetic mandible.The heads were scanned by a spiral CT scanner,and the data were imported into Mimics 18.0 to generate the 3D skull images.Distance,angle and ratio measurements,which could represented the aesthetic characters of the mandible,were made on the images.All the data were transferred into the SPSS 22.0 software to perform statistical analysis.A two-tailed t test was used to compare the symmetry of bilateral mandibles.Dynamic database of aesthetic mandibles was established.The mean,standard deviation,standard error and 95％ confidence interval of data were calculated by statistical software automatically.Results The results suggested that the mean of aesthetic mandibular angle was 123.91°,and the mean of mandibular plane angle was 27.03°.The ratio between the mandibular body and ramus approximated to 2 ∶ 1,and the ratio of the distance between gonion and mental foramen to ramus was close to 1.4.Conclusions The study of mandibular esthetics contributes to positioning the new gonion accurately for patients with prominent mandibular angle and gonion reconstruction,and it can assist surgeons in surgical designing,simulating and performing.

Objective To establish a cranial bone defect model of goat and to study application in craniomaxillo-facial surgery.Methods Electron beam computed tomography (EBCT) scanner was used to scan goat'heads and faces in series and thin layers.Data of EBCT were input in workstation from digital inlet,and then to three-dimensional reconstruction with method of surface shadow.After final data were transformed to the files,the rapid prototyping machine was able to identify and establish the 3D model.Results The EBCT continuous thin-layer (1 mm) scanning data were passed to wave filter,falling coarse,distinguishing and collecting the outline,3D-reconstruction,curved surface reconstruction with CAD and the substance reconstruction.The final data were input into the laser rapid prototyping machine.Three-dimensional bionic cranium models were fabricated by machine in layer by layer manufacturing principle.Conclusions Establishment of the cranial bone defect model in the goat is very useful to the three-dimensional measurement,individualized reconstruction and basic and clinical research for the cranial bone defect.