Objective: To investigate the association between monocyte to high-density lipoprotein cholesterol ratio (MHR) and periodontitis and to provide new epidemiologic evidence on the factors affecting periodontitis. Methods: Data on MHR, periodontitis, and other covariates were selected from the NHANES(National Health and Nutrition Examination) database for 3 cycles of subjects in 2009-2010, 2011-2012, and 2013-2014, and a total of 8 456 study subjects were included. The study participants were grouped according to the prevalence of periodontitis (presence or absence), and three regression models (unadjusted covariates, partially adjusted covariates, and fully adjusted covariates) were constructed to analyze the relationship between MHR and periodontitis by using a weighted logistic regression method with stepwise adjustment for confounders. MHR was divided into four groups from Q1 to Q4 according to quartiles from small to large for weighted trend analysis, and the nonlinear relationship between MHR (continuous) and periodontitis was analyzed using a restricted cubic spline with subgroup analysis and sensitivity analysis. Results: All three logistic regression models showed a positive association between MHR and periodontitis (OR = 2.92, 95%CI: 2.14-3.99, P<0.001 (not adjusted); OR = 1.97, 95%CI: 1.39-2.78, P<0.001 (partially adjusted); OR = 1.62, 95%CI: 1.10-2.39, P = 0.017 (fully adjusted)). Trend analysis showed a significantly higher risk of developing periodontitis in the Q4 group compared with the Q1 group in both single (OR = 1.92, 95% CI: 1.58-2.33, P<0.001) and multifactorial analyses (OR = 1.30, 95% CI: 1.03-1.64, P = 0.029). Restricted cubic spline results did not support a nonlinear relationship between MHR and periodontitis (P for nonlinear>0.05), subgroup analysis showed no significant interaction between the covariates and MHR (P>0.05), and sensitivity analysis also showed a positive correlation between MHR and periodontitis (OR = 1.67, 95%CI: 1.31-2.14, P<0.001). Conclusion MHR is positively associated with the risk of developing periodontitis.

BACKGROUND: To date, results on relationship between CYP3A4 gene polymorphism were limited and inconclusive, and no study focused on the influence of CYP3A4 gene-obesity interaction on breast cancer risk, especially in Chinese women. The purpose of this study was to evaluate the impact of four single nucleotide polymorphisms (SNPs) of CYP3A4 gene, the SNP-SNP and gene-environment interactions on the susceptibility to breast cancer in Chinese women. METHODS: Logistic regression was used to explore the relationship between four SNPs of CYP3A4 gene and the risk of breast cancer. Generalized multifactor dimensionality reduction (GMDR) was used to screen the best SNP-SNP and gene-abdominal obesity interaction combinations among four SNPs and abdominal obesity. Haplotype examination among 4 SNPs was conducted using the SHEsis web-based platform. RESULTS: Logistic regression analysis showed that carriers of rs2242480- T allele have significantly higher breast cancer risk, than those with rs2242480- CC genotype, adjusted OR (95%CI) was 1.68 (1.23-2.16) and 2.03 (1.53-2.58) for participants with CT genotype and TT genotype under additive model. We did not find any notable interactions between the four SNPs within the CYP3A4 gene. GMDR model found a significant association in a two-locus model involving rs2242480 and obesity, with a p-value of 0.018. Stratified analysis found that breast cancer risk was the highest in obese participants with rs2242480- CT or TT genotype, compared to those non-obese participants with rs2242480- CC genotype, OR (95%CI) was 3.02 (1.83-4.25). We found that all haplotype combinations were not correlated with breast cancer risk. CONCLUSIONS We found that the T allele of rs2242480 within the CYP3A4 gene and interaction between rs2242480 and obesity were associated with an increased risk of breast cancer. However, the results of this study were only applicable to the Han ethnic group and cannot be generalized to other ethnic groups in China, and more SNPs of CYP3A4 gene should been enrolled in the analysis in the future, to verify the results obtained in this study.
Adult ; Aged ; Female ; Humans ; Middle Aged ; Breast Neoplasms/etiology* ; China/epidemiology* ; Cytochrome P-450 CYP3A/metabolism* ; Gene-Environment Interaction ; Genetic Predisposition to Disease ; Haplotypes ; Obesity/epidemiology* ; Polymorphism, Single Nucleotide ; Risk Factors ; East Asian People

Objective: To explore the effect of different miniscrew placement heights on the distribution of biological forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization, to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments. Methods: Mimics, GeomagicStudio 2017, SolidWorks 2016, and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the following six working conditions: working condition 1 was the control group without miniscrews; working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm, 7 mm, 4 mm, and 1 mm from the top of the alveolar crest, respectively; working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane. Results: On the sagittal axis, miniscrew anchorage caused distal displacement of all teeth. Compared to the control group, in the miniscrew group, the displacement of the anterior molars exceeded that of the second molars. On the vertical axis, the result in the control group was similar to backward bending; the results in the miniscrew groups resembled the effect of a lever, lowering the lateral incisors and canines and raising the central incisors and first premolars. On the coronal axis, the second premolars and the first molars showed lingual displacement in the control group, and only the premolars and first molars showed lingual displacementin the miniscrew groups. The canines were the teeth that were most strongly affected by the change in miniscrew placement height. Conclusion The higher the miniscrew position is, the stronger the protective effect on the anterior anchorage. According to the miniscrew placement height, the mandibular arch should be properly narrowed, the central incisors and first premolars should be lowered, and the lateral incisors and canines should be raised when designing clinical treatments.

Objective This study aims to analyze the proteomic characteristics of peripheral blood in patients with lung cancer coexistent with pulmonary tuberculosis(LC-PTB),identify the differential proteins compared with lung cancer(LC)patients,and conduct functional analysis on these proteins.Methods The study included 8 LC-PTB patients and 10 LC patients.The LC patients were newly diagnosed and confirmed by pathology and did not receive any anti-tumor treatment before,while the PTB patients were Mycobacterium tuberculosis positive at the time of sampling.Liquid chromatography-tandem mass spectrometry(LC-MS/MS)was applied to perform proteomic mass spectrometry to assess the differential proteins,and then functional analysis was conducted via bioinformatics.Results A total of 5,185 proteins were detected between two groups.Through differential expression screening,190 proteins(58 upregulated and 132 downregulated)were identified to be differentially expressed.Subcellular localization analysis revealed that the differential proteins were mainly concentrated in the cytoplasm,nucleus,and extracellular matrix.KEGG pathway and GO analysis showed the roles of differential proteins in biological processes including immune response,metabolism,and secretion regulation.Protein interaction network analysis highlighted the importance of SORT1,SAR1B,RPS6KB1,VWF,SHC1,SRPRB,CTSD,TARDBP,RPLP0,PSMA2,RPS6,XPO1,PRKACB,and HLA-DRB1 in LC-PTB.Additionally,the expression changes in proteins like ADA2,MAP3K1,and GLS2 might be closely associated with the development of LC-PTB.Conclusions The proteomic profile comprehensively described the proteomic characteristics of LC-PTB and identified numerous differentially expressed proteins,which could provide further clues for research on biological mechanism of LC-PTB.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.