OBJECTIVE To investigate the effects of metformin （Met） on liver injury in non-alcoholic steatohepatitis （NASH） rats by regulating the PI3K/AKT/PDGF signaling pathway. METHODS NASH model was constructed by feeding rats with a high- glucose and high-fat diet， and assigned into Model group， Met low-dose group （Met-L group， 100 mg/kg）， Met medium-dose group （Met-M group， 200 mg/kg）， Met high-dose group （Met-H group， 400 mg/kg）， and high dose of Met+PI3K activator group （Met-H+740 Y-P group， 400 mg/kg Met+50 mg/kg 740 Y-P）， with 12 rats in each group. Another 12 rats were regarded as the Control group. Each group of rats was orally administered/injected with the corresponding medication once a day for 6 consecutive weeks. The changes in body weight and liver index of rats were recorded and analyzed. The pathological damage [evaluation of non-alcoholic fatty liver disease activity score （NAS）]， lipid deposition （calculation of the proportion of oil red O-positive staining area）， and fibrosis （calculation of collagen deposition score） were observed in liver tissue of rats. The levels of inflammatory factors [interleukin-6 （IL-6） and tumor necrosis factor-α （TNF-α）] in serum and liver tissue， the levels of serum lipid metabolism indicators [total cholesterol （TC）， triglyceride （TG）， and low-density lipoprotein cholesterol （LDL-C）] and liver function indicators [aspartate aminotransferase （AST） and alanine Δ 基金项目 武汉市知识创新专项项目（No.2022020801010588）； aminotransferase （ALT）] were measured. The expression levels of PI3K/AKT/PDGF signaling pathway-related proteins and Caspase-3 in liver tissue of rats were determined. RESULTS Compared with the Control group， body weight， liver index， the levels of serum lipid metabolism indicators and liver function indicators， the levels of IL-6 and TNF-α in serum and liver tissue， the NAS， the proportion of oil red O-positive staining area， the collagen deposition fraction， and the levels of phosphorylated PI3K and AKT proteins， as well as the expression levels of PDGF and Caspase-3 proteins in liver tissue， were all significantly increased （P＜0.05）. The liver tissue showed severe pathological damage， characterized by an abundance of lipid droplets and pronounced collagen deposition. After the intervention with Met， the aforementioned quantitative indicators and pathological changes in rats were significantly improved in a dose- dependent manner （P＜0.05）. 740 Y-P could reverse the improvement effects of high dose of Met on the above indexes of rats （P＜ 0.05）. CONCLUSIONS Met can improve liver damage， and alleviate inflammatory reactions and liver fibrosis of NASH rats， the mechanism of which may be associated with inhibiting PI3K/AKT/PDGF signaling pathway.

To investigate the efficacy of amiodarone and lidocaine in cardiac arrest patients.

BACKGROUND:There is still no consensus on the optimal internal fixation for the treatment of Pauwels Ⅲ femoral neck fracture,and most of the related finite element analyses have been performed using a single simplified loading condition,and the biomechanical properties of commonly used internal fixation devices need to be further investigated. OBJECTIVE:To analyze the biomechanical characteristics of Pauwels Ⅲ femoral neck fractures treated with cannulated compression screw,dynamic hip screw,and femoral neck system by finite element method under different loading conditions of single-leg standing loads and sideways fall loads. METHODS:The DICOM data of healthy adult femur were obtained by CT scanning,imported into Mimics 15.0 software to obtain the rough model of bone tissue.The data exported from Mimics were optimized by Geomagics software,and then three internal fixation models were built and assembled with the femur model according to the parameters of the clinical application of the cannulated compression screw,dynamic hip screw,and femoral neck system by using Pro/E software.Finally,the three internal fixation models were imported into Ansys software for loading and calculation to analyze the stress distribution and displacement of the femur and the internal fixation under different working conditions of single-leg standing loads and sideways fall loads,as well as the stress characteristics of the calcar femorale and Ward's triangle. RESULTS AND CONCLUSION:(1)Under the single-leg standing load and the sideways fall load,the proximal femoral stress of the three internal fixation models was mainly distributed above the fracture end of the femoral neck.The peak stress of the proximal femoral end,fracture end,Ward triangle,and calcar femorale of the three internal fixation models were the smallest in the femoral neck system model and the largest in the cannulated compression screw model.(2)Under the single-leg standing load and the sideways fall load,the peak displacement of the proximal femur of the three internal fixation models was all located at the top of the femoral head,and the peak displacement was the smallest in the femoral neck system model and the largest in the cannulated compression screw model.(3)The peak displacement of the three internal fixation models was all located at the top of the internal fixation device under the single-leg standing and sideways fall loading conditions,and the peak displacement values were the smallest in the femoral neck system internal fixation model and the largest in the cannulated compression screw internal fixation model.(4)The internal fixation stress of the three internal fixation models was mainly distributed in the area near the fracture end of the internal fixation device under the single-leg standing and sideways fall loads,and the peak value of internal fixation stress was the smallest in the femoral neck system model and the largest in the cannulated compression screw model.(5)These results suggest that the mechanical stability of the femoral neck system is the best,but there may be a risk of stress shielding of the fracture end and calcar femorale.The stress of the internal fixation device of the femoral neck system is more dispersed,and the risk of internal fixation break is lower.

BACKGROUND:The treatment of distal tibial comminuted fractures with soft tissue injury has always been challenging.The new retrograde tibial nailing and supercutaneous locking plate are important treatment methods,but their strain and stress shielding at the fracture end during different periods of fracture healing and different load conditions have not been reported. OBJECTIVE:To explore the biomechanical stability of retrograde tibial nailing and supercutaneous locking plate in different periods of fracture healing by finite element analysis to offer a scientific foundation for clinical application and rehabilitation exercise. METHODS:The finite element model of distal tibial comminuted fracture was established by utilizing the CT data of the tibia from a 40-year-old healthy male.Retrograde tibial nailing,supercutaneous locking plate,and callus models were assembled in accordance with the principle of fracture fixation.The finite element analysis was performed using ANSYS software to compare the displacement of the fracture end,the stress shielding of the tibia,the stress of the callus,and the stress distribution of the tibia and the fixation device during different periods of fracture healing. RESULTS AND CONCLUSION:(1)The relative displacement of the tibial fracture decreased gradually with the healing of the fracture,and the displacement decreased significantly after 3 months.At 0 and 1 months after operation,the vertical displacement and total displacement of the supercutaneous locking plate group were higher than those in the retrograde intramedullary nail group.The Z-axis displacement(horizontal medial and lateral displacement)of the two fixation methods was more obvious than the X-axis and Y-axis,and the Z-axis displacement of supercutaneous locking plate group was the most obvious.The maximum Z-axis displacement of the two fixation methods was located on the outside of the tibia,and the minimum displacement was located on the inside of the tibia.(2)The stress shielding rate at different periods of fracture healing gradually decreased with time.The stress shielding rate of the retrograde intramedullary nail was higher than that of the supercutaneous locking plate at different stages of fracture healing.After 3 months,the stress shielding rate of the supercutaneous locking plate was reduced to about 4%,and the stress shielding rate of the retrograde intramedullary nail was reduced to about 40%.(3)The stress of the stress concentration site of the callus in the two fixation methods increased with the increase of the load,and the stress of the callus in the supercutaneous locking plate group was always greater than that in the retrograde intramedullary nail group.The maximum stress distribution of the callus was approximately equally distributed among the two modes of fixation,both in the lateral portion of the tibia.(4)As the fracture healed,the maximum stress of the tibia in the two groups decreased gradually,and the stress in the supercutaneous locking plate group was always greater than that in the retrograde intramedullary nail group.The average stress of the maximum stress area of the tibia in the supercutaneous locking plate group under 1 500 N load was 285 MPa,while that in the retrograde intramedullary nail group was 26 MPa.(5)As the fracture healed,the stress of the fixation device in the two groups decreased gradually,and the stress in the supercutaneous locking plate group was significantly higher than that in the retrograde intramedullary nail group.After 3 months,the stress of the two fixation devices decreased significantly.(6)It is indicated that in the early stage of fracture healing,the strain on the fracture end in the retrograde intramedullary nail group is small,and the maximum stress of the tibia is moderate,allowing early loaded.The fractured ends in the supercutaneous locking plate group had too large strain and too large maximum stress of the tibia,which needed to be partially loaded under protection and could not be fully loaded.In the middle and late stages of fracture healing,the tibial retrograde intramedullary nail and the supercutaneous locking plate could be completely loaded,and the stress shielding rate of the supercutaneous locking plate was significantly lower than the tibial retrograde intramedullary nail.

"Toxicity Testing in the 21st Century—A Vision and Strategy"proposed by the National Research Council of US has brought innovative directives and objectives for toxicity evaluation and risk assessment,pushing forward the next generation of toxicity testing and risk assessment.In this initiative,the concept of adverse outcome pathways(AOPs)has emerged as a prominent methodology,capturing the attention of toxicologists and researchers due to its promising applications in recent years.The quantitative AOP(qAOP)is an extension of the adverse outcome pathway,which is built upon the foundational qualitative adverse outcome pathway model and leverages mathematical frame-works to depict dose-response and/or response-response relationships.This article reviews the princi-ples and advancement surrounding qAOP,introduceds two prevalent methodologies for constructing qAOP,Bayesian network models and regression models,and demonstrates diverse applications of qAOP.Actual cases are used to underscore the transformative role of qAOP in contemporary toxicology and risk assessment practices.

Objective To evaluate the relationship between perceived risk of complications of hypertension and medication adherence among patients with known hypertension. Methods Data were collected using a structured administrative questionnaire that mainly included information on basic demographic information, smoking history, access to healthcare services, duration of antihypertensive treatment, number of concurrent medications, and their perceived risk of complications related to hypertension. Morisk Medication Adherence Scale (MMAS-8) was used to measure the patients' antihypertensive medication adherence, and multivariate logistic regression analysis was used to identify independent factors related to adherence. Results Nearly half (48.8%) of the participants had uncontrolled hypertension, and more than one fifth (22.3%) of the patients had high adherence to antihypertensive medication. Independent factors highly associated with antihypertensive medication adherence were higher education level (OR:1.71, 95% CI: 1.06-2.75), never smoking (OR: 1.62 , 95% CI: 1.06-2.46), easy access to health care (OR: 1.91, 95% CI : 1.10-3.35), lower average treatment duration (OR: 0.96, 95% CI: 0.92-0.99), and higher perceived risk of hypertension-related complications (OR: 2.34 , 95% CI: 1.52-3.60). Conclusion High perceived risk of hypertension-related complications is significantly correlated with adherence to antihypertensive treatment.

In 2009,the World Health Organization included snakebite on the list of neglected tropical diseases,acknowledging it as a common occupational hazard for farmers,plantation workers,and others,causing tens of thousands of deaths and chronic physical disabilities every year.This guideline aims to provide practical information to help clinical professionals evaluate and treat snakebite victims.These recommendations are based on clinical experience and clinical research evidence.This guideline focuses on the following topics:snake venom,clinical manifestations,auxiliary examination,diagnosis,treatments,and prevention.

BACKGROUND:Sepsis is one of the main causes of mortality in intensive care units(ICUs).Early prediction is critical for reducing injury.As approximately 36%of sepsis occur within 24 h after emergency department(ED)admission in Medical Information Mart for Intensive Care(MIMIC-IV),a prediction system for the ED triage stage would be helpful.Previous methods such as the quick Sequential Organ Failure Assessment(qSOFA)are more suitable for screening than for prediction in the ED,and we aimed to find a light-weight,convenient prediction method through machine learning. METHODS:We accessed the MIMIC-IV for sepsis patient data in the EDs.Our dataset comprised demographic information,vital signs,and synthetic features.Extreme Gradient Boosting(XGBoost)was used to predict the risk of developing sepsis within 24 h after ED admission.Additionally,SHapley Additive exPlanations(SHAP)was employed to provide a comprehensive interpretation of the model's results.Ten percent of the patients were randomly selected as the testing set,while the remaining patients were used for training with 10-fold cross-validation. RESULTS:For 10-fold cross-validation on 14,957 samples,we reached an accuracy of 84.1%±0.3%and an area under the receiver operating characteristic(ROC)curve of 0.92±0.02.The model achieved similar performance on the testing set of 1,662 patients.SHAP values showed that the five most important features were acuity,arrival transportation,age,shock index,and respiratory rate. CONCLUSION:Machine learning models such as XGBoost may be used for sepsis prediction using only a small amount of data conveniently collected in the ED triage stage.This may help reduce workload in the ED and warn medical workers against the risk of sepsis in advance.

Screening and evaluating the diseases responding specifically to traditional Chinese medicine （TCM） will help to highlight the advantages of TCM treatment， and the evaluation method should be standardized with consideration to the unique characteristics of the diseases. The incidence of Sjögren's Syndrome （SS） is increasing year by year， while the pathogenesis of this disease remains unclear. Modern therapies for this disease include biological agents and immunosuppressants， which generally have unsatisfactory efficacy. The TCM treatment of SS focuses on the harmony of the physical and mental health. The Rheumatology Branch of the China Association of Chinese Medicine organizes experts in TCM， Western medicine， and evidence-based medicine to form working groups. Delphi method and bibliometric method were used for analysis， and SS was selected as a disease responding specifically to TCM. Furthermore， the evaluation system was established for this disease， and the consensus regarding this disease was reached after seminar discussion. This paper summarized the whole process of the evaluation of the advantages of TCM treatment of SS. First， because TCM atomization is widely used in clinical practice and enriches TCM administration methods， this therapy is included after other non-drug therapies were taken as characteristic therapies. Second， the evaluation indicators of therapeutic effect should be determined with consideration to international acceptance and the current research status. Third， the expression method should be accurate， standardized， and objective， highlight the natural advantages of TCM， and avoid arbitrary extension. This paper provides a reference for clinicians to explore other diseases responding specifically to TCM.

Objective:To identify micronuclei through the cytochalasin B blocking micronucleus method-based assay using scanning microscope, combined with the slide scanning software Metafer 4 and, accordingly, to establish a dose-response relationship between the dose of 60Co γ-rays and the frequency of micronuclei in human peripheral blood lymphocytes using artificial intelligence-based color recognition. Methods:Blood samples were collected from four healthy individuals (two men and two women) and were then exposed to varying doses of 60Co γ-ray radiation (0, 0.25, 0.5, 1, 2, 3, 4, 5 Gy) at a dosage rate of 0.74 Gy/min. Micronucleus slides were prepared as per the GBZ 128-2023 standard. The numbers of binuclear cells and micronuclei were recorded using an artificial intelligence-based color recognition analysis system. The dose-response curve was determined through fitting using the CABAS software. Then, the doses to both independent samples were estimated based on the curve. Results:Within a dose range of 0 to 5 Gy, the fitted micronucleus dose-response curve aligned with a quadratic polynomial model, with a regression equation of y = 0.032 1 D2+ 0.023 7 D+ 0.012 7 ( D denoting the dose, correlation coefficient R2=0.998). The dose estimations from the validation samples closely corresponded to the actual irradiation doses. Conclusions:Establishing the micronucleus dose-response curve provides a feasible method and basis for the rapid and accurate estimation of radiation biological doses in laboratory automation.