BACKGROUND:Studies have shown that the physical development potential is often associates with certain combinations of hand print features.
OBJECTIVE:To analyze the body shape and structure characteristics of national women’s handbal team athletes.
METHODS:Fifty national women’s handbal team athletes were col ected from Shanghai, Beijing, Tianjin and Anhui provinces and PLA. The body shapes of the athletes were measured by the Research Institute of National Sports Council, and the hand prints were col ected. The common factors of body shape and structure characteristics were analyzed with factor analysis method, including height, weight, forearm length, wrist circumference, hand length, hand width and index finger length and large-handedness index.
RESULTS AND CONCLUSION:The body shape and structure characteristics of national women’s handbal team athletes could be divided into four types:long trunk lean type indicator, hand skeleton and muscle fiber development level index, flexible quality indicators as wel as the alertness and mental level indicators. The long trunk lean type indicator was the main factor to affect body shape and structure characteristics of national women’s handbal team athletes.

BACKGROUND: The development of hip joint in children with developmental dislocation of the hip (DDH) has been evaluated by X-ray plain film, which mainly presents Shen Tong's line continuity and epiphyseal nucleus position. There is still a lack of quantitative and objective evaluation methods. OBJECTIVE: To evaluate the rotation center and dislocation degree in DDH children by using three-dimensional (3D) computed tomography (CT).METHODS: Preoperative 3D CT was performed for 16 unilateral DDH from December 2010 to December 2014 in Tongji Hospital of Huazhong University of Science and Technology, with 4 males and 12 females, at the mean age of (4.42±2.59) years. There were 10 cases on the left side and 6 cases on the right side. 3D digital models were constructed by analysis. The 3D coordinate system was established with reverse engineering software. In 3D coordinatesystem, using inverse solution method of sphere fitting engineering, the rotation center of the acetabulum, the rotationalcenter of the femoral head, and the radius of ossification were constructed. Ossific radius ratio and dislocation lengthwere calculated. RESULTS AND CONCLUSION: (1) The acetabulum has the same point as the rotation center with the head of femur,and no significant difference in X, Y, and Z coordinates was detected (Px > 0.05, Py > 0.05, Pz > 0.05). However, it is notthe same condition in ipsilateral acetabular rotation center and femoral head rotation center, showing significant differences (Px=0.052, Py < 0.05, Pz < 0.05). (2) There were no significant differences in ossific radius between the healthy and affected sides (P > 0.05). The ossific radius was (21.37±4.42) mm and (20.14±3.14) mm on the healthy and affected sides of the femoral head (P < 0.05). (3) There was no significant difference in ossific radius ratio between healthy and affected sides (0.544±0.069 and 0.522±0.088; P > 0.05). (4) The dislocation length was 8.64-35.28 mm, mean (19.47±7.84) mm. (5) These findings suggest that 3D CT reconstruction can construct 3D digital models of DDHchildren. Thus, the accurate rotation center of the hip can be identified so as to precisely measure the dislocation length.

A L-arginine-producing mutant UN100-12(SG~(r),AE~(r)) was derived from Corynebacterium glutamicum ATCC138761 by combination treatment with ultraviolet(UV) and N-methyl-N-nitro-N-nitrosoguanidine(NTG). It could accumulate 16.6g/L L-arginine in the medium containing glucose as carbon source and ammonium sulfate as nitrogen source, when it was culrured at 30℃ for 4 days. And also this mutant has good stability of descendiblity of L-arginine.

Objective: To investigate the neuroendocrine properties of adrenalcortical tumors. Methods: We retrospectively reviewed the clinical data of 99 adrenalcortical tumor patients, who were treated in Changzheng Hospital form June 1999 to June 2005. Expression of neuron specific enolase (NSE), chromogranin A (CgA) and synaptophysin (Syn) proteins were examined by immunohistochemistry (S-P method) using monoclonal antibodies. The general data of patients, including the age, symptoms, laboratory findings, and pathological types, were collected and subjected to statistical analysis with SAS v6. 12 software. Results: The expression of all the above 3 proteins was found in adrenalcortical adenoma tissues, with the positive rate of NSE being 80%, the positive rate of CgA being 48.9%, and the positive rate of Syn being 75.6%; the positive rates in the adrenalcortical carcinoma tissues were 77.8%, 22.2%, and 77.8%, respectively; and those in the normal adrenal tissues was 20%, 0%, and 10%, respectively. The positive rates of 3 proteins in adrenalcortical tumors was significantly higher than those in the normal adrenal tissues (P

As one of the most serious hereditary neuromuscular disease, spinal muscular atrophy (SMA) is caused by the loss or mutation of survival motor neuron 1 (SMN1) gene. It leads to a decrease in the level of SMN protein and a consequent loss of alpha neurons and progressive muscle atrophy resulting in the progressive muscle weakness, the significant disability and the shortened lifespan. Up till now, only three drugs have been approved for SMA, including the gene therapy drug onasemnogene abeparvovec. The antisense oligonucleotide drug nusinersen and and the small molecule chemical drug risdiplam were briefly introduced. Some representative samples of the small molecule chemical drugs and antisense oligonucleotide drugs targeting SMN2 in the clinical trial or preclinical research phases were also reviewed.

[Objective]To simulate the biomechanics mechanism and environment of humeral fracture caused by indirect impact force for the purpose of biomechanics understanding and treatment of such fracture.[Method]Based on the data source, which was high-resolution anatomic slice images from approximal clavicle to distal humerus, 1 mm thickness and totally 380 layers, the geometric model of total shoulder joint was established according to the order:point, line,area, and further meshed to set up the three dimension finite element model of shoulder, fracture sites and instantaneous stress and strain of humerus were simulated and analyzed under the condition which longitudinal impact force was loaded on the humerus based on the 12 functional positions of shoulder(abduction 30?、 45?、 60?、 90?, and simultaneous neutrality, internal rotation 45?,external rotation 45?).[Result]According to the humeral shaft load-strain curve in different functional positions of shoulder, linear relation was found when load changed from 0 N to 250 N, after which non-linear come out, and even load was removed , bone was deformed eternally. With the rise in load amount, the increase in stress was detected. When abduction degree changed from 90? to 30?, the strain of humerus, both the lateral and the medial increased gradually,and increase in internal rotation 45?and external rotation 45? was more significant than that in neutrality. Meanwhile, stress difference could be seen between the lateral and the medial , and medial was larger than the lateral. Increase in stress in rotation positions was quicker and more than that in other functional positions.[Conclusion]Based on 4 abduction degrees (30?, 45?, 60?, 90?) and 3 rotation degrees(neutrality, internal rotation 45?,external rotation 45?) ,the three dimensional finite element shoulder could simulate precisely stress, strain, general trend of fracture line, three dimension images of bone failure. Three dimension finite element simulation and analysis of shoulder is a valuable mechanical method for research on biomechanics theory related to humerus fracture.

0.05).There were no pseudoarthrosis and internal fixation failure.The incidence of proximal junction kyphosis was higher in group B(P

[Objective]To investigate the methods of surgical treatment of complicated lumbar spinal stenosis. [Methods]Totally 176 patients who were diagnosed as having complicated lumbar spinal stenosis,operated by back decompression,fused by bone graft and internal fixed by pedicle screws from January 1997 to January 2001 were retrospectively analyzed.Ninety-eight were males and 78 were females,with an average age of 58.5 years.Patient history was from 2 to 31 years.Thirty-five patients had a previous surgery on lumbar vertebrae,and 19 patients had two or more.Forty patients were complicated with one degree degenerated olisthe,42 were complicated with lumbar scoliosis and Cobb's angle more than 20?,21 had lumbar unsteadiness after surgery,19 patients had spinal stenosis in juncture after surgery.One ore two segments intervertebral discs were removed and vertebral plate were closed together,fused by bone graft and fused articular process.To the patients with more than two segments affection,processus articularis and processus transverses were fused to the patients need not remove intervertebral disk or remove less than half of processus articularis and interbody vertebral were fused to the patient need remove intervertebral disk.Patients with scoliolosis were decompressed and inserted pedicle screws.Revolve rod combined with compression and brace technique was used to correct scoliolosis,fuse the disk and articular process to the patient with severe intervertebral disk hernia and others were fused post-lateraly.[Results]Operation time was from 80 to 250 minutes.Blood loss was from 450ml to 1600ml and no patient died.The follow-up duration averaged 5.6 years.Fused disks had good to excellent rate of 87.4%,and multi-segments had good to excellent rate of 86.1%,and combined with scoliolosis good to excellent rate of 89.8%.The Cobb's angle was average 6.7? and correct rate was 73.8%.The fused rate of post-lateral was 92%(60/65),while the interbody vertebral fused rate was 97.9%(139/142).[Conclusion]The operation of complicated lumbar spinal stenosis is difficult to operate and has high risk.Back decompression,fused by bone graft and internal fixation by pedicle screws is a good method.