1.THE ANTIOXIDANT ACTION OF MALTOL ON ERYTHROCYTE MEMBRANE
Limin FENG ; Fubao LIN ; Huazhen PAN
Chinese Pharmacological Bulletin 1986;0(04):-
Maltol is a chemical derived from Chinese herb Panax Ginseng. The effect of maltol on hemolysis and hydroperoxidation of erythro-cytes induced by active oxygen radical is presented. Maltol could protect hemolysis induced by H2O2 in vitro. When erythrocyte membrane protein was exposed to butylhydroperoxide in vitro, membrane protein was polymerized, and membrane lipids were oxidized to hydroperoxide compound. These oxidative reactions could inhibited by maltol. The results showed that maltol might act as a scavenger of superoxide of hydroxy radical as demonstrated by biochemical method and ESR spin method。
2.THF TOXICITY OF MALTOL AND ITS EFFECT ON ANTIOXIDATIVE ENZYME ACTIVITIES OF ERYTHROCYTES IN MICE
Huazhen PAN ; Fubao LIN ; Xiaobing LIU
Chinese Pharmacological Bulletin 1986;0(06):-
According to our previous experimental results, maltol is a powerful antioxidant against autoxidation and oxidative stress of eryth-rocytes. In this report, the toxicity and antioxidative action of maltol in mice was investigated. The results indicated that maltol was not toxic in mice when fed in a dose of 50mg/kg?d-1 (body weight) for 1 month. The antioxidative enzymes ( SOD and Cat ) activities and GSH content of erythrocytes were significantly increased. In addition, the lifespan of houseflies fed with maltol was prolonged.
3.Effect of different polymerization methods on shear bond strength between polymethyl methacrylate and silicone soft liner.
Fubao ZHANG ; Lianshui SHI ; Li DENG ; Lin ZHANG ; Yongfa ZENG ; Tao TU
West China Journal of Stomatology 2014;32(3):292-296
OBJECTIVETo compare shear bond strength (SBS) between two types of silicone soft liner and polymethyl methacrylate (PMMA) under the condition of heat curing and room temperature curing.
METHODSA total of 48 PMMA specimens (50 mm x 10 mm x 3 mm) were made by water-bath heating method, and randomly divided into four groups. By using Ufi Gel P (UGP) as soft liner material, group A1 was prepared under heat curing, and group A2 was prepared under room temperature curing. To form the other two groups, Silagum-Comfort (SLC) as soft-liner material was used. Group B1 was prepared under heat curing, and group B2 was prepared under room temperature curing. Shear bond strength (SBS) was tested by using the electronic universal testing machine. The adhesives layer and surface of silastic and PMMA were observed by optical microscope and scanning electron microscopy (SEM).
RESULTSThe SBS of groups A1, A2, B1, B2 were (2.39 +/- 0.24), (1.74 +/- 0.27), (3.09 +/- 0.26), and (2.21 +/- 0.29) MPa, respectively. Significant differences were found between A1 and A2, B1 and B2, A1 and B1, and A2 and B2 (P < 0.05). Optical microscope showed numerous bubbles in the cured UGP, and no air bubbles in the SLC. The surface of PMMA was rough. SEM images showed that each group had continual consistent adhesive interface and a whisker hump on the adhesive layer of A2 and B2.
CONCLUSIONThe SBS ofUGP, SLC, and PMMA achieved minimum clinical standard of 0.44 MPa. The SBS of UGP and PMMA were higher than that of SLC and PMMA. The polymerization method of heat curing was higher than room temperature curing.
Dental Bonding ; Denture Liners ; Dimethylpolysiloxanes ; Materials Testing ; Polymerization ; Polymethyl Methacrylate ; Silicone Elastomers ; Silicones ; Tensile Strength
4.Prosthodontic treatment on mandibular fracture with poor healing: a case report.
Fubao ZHANG ; Lianshui SHI ; Lin ZHANG
West China Journal of Stomatology 2012;30(3):333-334
A mandibular fracture case of twice internal fixation surgery with poor healing was treated by denture prosthodontics in Affiliated Stomatological Hospital of Nanchang University. The profile of maxillofacial region was improved, the masticatory function was enhanced, and the new bone formation was promoted.
Fracture Fixation, Internal
;
Humans
;
Mandibular Fractures
;
Prosthodontics
5.Clinical evaluation of four different impression methods with vinyl polysiloxane
Li DENG ; Fubao ZHANG ; Lianshui SHI ; Lin ZHANG ; Yongfa ZENG ; Peng ZHOU
Journal of Practical Stomatology 2014;(4):570-571
94 cases with 148 abutments treated by all-ceramic restoration in premaxillary teeth region were randomly divided into 4 groups, and the impressions were prepared by one-step method,double curettage method,double polish method and double microfilm method respec-tively using 3M ESPE Vinyl polysiloxane as impression material.The cervical margin precision of the impressions was compared.Four kinds of impression method can produce qualified impression.Double polish method is easy to teach and learn.
6.High titer ethanol production from an atmospheric glycerol autocatalytic organosolv pretreated wheat straw.
Liang WANG ; Jianquan LIU ; Zhe ZHANG ; Feiyang ZHANG ; Junli REN ; Fubao SUN ; Zhenyu ZHANG ; Cancan DING ; Qiaowen LIN
Chinese Journal of Biotechnology 2015;31(10):1468-1483
The expensive production of bioethanol is because it has not yet reached the 'THREE-HIGH' (High-titer, high-conversion and high-productivity) technical levels of starchy ethanol production. To cope with it, it is necessary to implement a high-gravity mash bioethanol production (HMBP), in which sugar hydrolysates are thick and fermentation-inhibitive compounds are negligible. In this work, HMBP from an atmospheric glycerol autocatalytic organosolv pretreated wheat straw was carried out with different fermentation strategies. Under an optimized condition (15% substrate concentration, 10 g/L (NH4)2SO4, 30 FPU/g dry matter, 10% (V/V) inoculum ratio), HMBP was at 31.2 g/L with a shaking simultaneous saccharification and fermentation (SSF) at 37 degrees C for 72 h, and achieved with a conversion of 73% and a productivity of 0.43 g/(L x h). Further by a semi-SFF with pre-hydrolysis time of 24 h, HMBP reached 33.7 g/L, the conversion and productivity of which was 79% and 0.47 g/(L x h), respectively. During the SSF and semi-SSF, more than 90% of the cellulose in both substrates were hydrolyzed into fermentable sugars. Finally, a fed-batch semi-SFF was developed with an initial substrate concentration of 15%, in which dried substrate (= the weight of the initial substrate) was divided into three portions and added into the conical flask once each 8 h during the first 24 h. HMBP achieved at 51.2 g/L for 72 h with a high productivity of 0.71 g/(L x h) while a low cellulose conversion of 62%. Interestingly, the fermentation inhibitive compound was mainly acetic acid, less than 3.0 g/L, and there were no other inhibitors detected, commonly furfural and hydroxymethyl furfural existing in the slurry. The data indicate that the lignocellulosic substrate subjected to the atmospheric glycerol autocatalytic organosolv pretreatment is very applicable for HMBP. The fed-batch semi-SFF is effective and desirable to realize an HMBP.
Biofuels
;
Carbohydrates
;
chemistry
;
Cellulose
;
chemistry
;
Ethanol
;
metabolism
;
Fermentation
;
Furaldehyde
;
chemistry
;
Glycerol
;
chemistry
;
Hydrolysis
;
Triticum
7.Occlusal reconstruction of a patient with hypohidrotic ectodermal dysplasia.
Yongfei ZENG ; Lianshui SHI ; Fubao ZHANG ; Lin ZHANG
West China Journal of Stomatology 2013;31(1):99-103
Prosthodontic treatment for patient with hypohidrotic ectodermal dysplasia (HED) is difficult to manage because of the loss of occlusal vertical dimension, abnormal alveolar ridge and anodontia A 20-year-old case with HED was reported. The patient was treated with occlusal reconstruction by a maxillary fixed prosthesis and mandibular telescopic prosthesis. At one-year's follow-up, dentures were well used and occlusal function of the patient returned to normal.
Anodontia
;
Ectodermal Dysplasia 1, Anhidrotic
;
Humans
;
Male
;
Reconstructive Surgical Procedures
;
Young Adult
8.Mechanisms underlying internal heat-type acupuncture in the treatment of steroid-induced osteonecrosis of the femoral head in rabbits
Liangchen MA ; Fubao TIAN ; Yujuan XU ; Xinbao TIAN ; Ying TAO ; Mengying CHEN ; Jiawei LIAN ; Ruizhu LIN ; Ning ZHU
Chinese Journal of Tissue Engineering Research 2024;28(27):4353-4359
BACKGROUND:Internal heat-type acupuncture therapy is a new treatment technique that combines acupuncture therapy with hyperthermia.It has good clinical effects on steroid-induced osteonecrosis of the femoral head,but the mechanism of action is still not fully clear. OBJECTIVE:To explore the possible mechanism of internal heat-type acupuncture therapy in treating steroid-induced osteonecrosis of the femoral head in rabbits. METHODS:Thirty-two New Zealand rabbits were randomly divided into blank group,model group,internal heat-type acupuncture group and shock wave group using a random number table method,with 8 rabbits in each group.The model group,internal heat-type acupuncture group and shock wave group were modeled using methylprednisolone sodium succinate combined with Escherichia coli endotoxin.The internal heat-type acupuncture group received an internal heat-type acupuncture intervention on the buttocks of rabbits,once a week,for 20 minutes each time.The shock wave group received shock wave intervention on the buttocks of rabbits,once a week,with 2 000 beats per session.The blank group and model group were not given any treatment.After 4 weeks of intervention,blood samples and bilateral femoral head samples were collected from experimental rabbits.The levels of tumor necrosis factor-α and interleukin-6 in serum were detected by ELISA;the histomorphology of the femoral head was observed using hematoxylin-eosin staining and the rate of empty lacunae was calculated;the protein expressions of matrix metalloproteinase 2,matrix metalloproteinase 9,matrix metalloproteinase tissue inhibitor 1,and matrix metalloproteinase tissue inhibitor 2 were detected by immunohistochemistry and western blot. RESULTS AND CONCLUSION:Compared with the blank group,the model rabbits showed reduced food intake,mental fatigue,and decreased activity;compared with the model group,the above performance of the experimental rabbits was significantly improved after internal heat-type acupuncture and shock wave treatment.Compared with the blank group,the histomorphology of the femoral head in the model group deteriorated significantly and the rate of empty bone lacuna increased(P<0.001),while the histomorphology of the femoral head in the internal heat-type acupuncture group and shock wave group was significantly improved compared with the model group,and the rate of empty bone lacuna was reduced(P<0.001).The serum levels of tumor necrosis factor-α and interleukin-6 in the model group were significantly higher than those in the blank group(P<0.05),while the serum levels of tumor necrosis factor-α and interleukin-6 in the internal heat-type acupuncture group and the shock wave group were significantly lower than those in the model group(P<0.05).Compared with the blank group,the expression levels of matrix metalloproteinase 2 and matrix metalloproteinase 9 in the femoral head of the model group were significantly increased,while the expression levels of matrix metalloproteinase tissue inhibitor 1 and matrix metalloproteinase tissue inhibitor 2 were significantly decreased(P<0.001);compared with the model group,the protein expression levels of matrix metalloproteinase 2 and matrix metalloproteinase 9 were significantly decreased,while the protein expression levels of matrix metalloproteinase tissue inhibitor 1 and matrix metalloproteinase tissue inhibitor 2 were significantly increased in the internal heat-type acupuncture group and the shock wave group(P<0.001).Overall,these findings indicate that internal heat-type acupuncture may promote the repair of the necrotic femoral head by regulating the levels of matrix metalloproteinases/matrix metalloproteinase tissue inhibitors and serum inflammatory factors,thus treating early steroid-induced osteonecrosis of the femoral head.