Objective: To explore the relationship between serum homocysteine (Hcy), interleukin-5 (IL-5), folate and core symptoms in children with autism spectrum disorders, so as to provide potential biomarkers for early diagnosis and intervention of diseases. Methods: A total of 106 children with autism spectrum disorders and 106 healthy children with matched sex and age in Lu an People s Hospital were enrolled as autism group and healthy group between May 2020 to December 2023. On the day of admission, levels of serum Hcy, IL-5 and folate were detected. The core symptoms in autism group were evaluated by Autism Behavior Checklist (ABC), Wechsler Preschool and Primary Scale of Intelligence-fourth edition(WPPSI-IV), Childhood Autism Rating Scale (CARS) and Social Responsiveness Scale (SRS). The levels of serum Hcy, IL-5 and folate in the two groups were compared by t- test. The relationship between serum Hcy, IL-5, folate and core symptoms in children with autism spectrum disorders was determined by Pearson correlation analysis. Results: The levels of serum Hcy and IL-5 in autism group were (7.48±0.32) μmol/L and (345.77±32.51) pg/mL, higher than those in healthy group [(6.11±0.54) μmol/L, (274.04±25.17) pg/mL], while folate level was lower than that in healthy group [(15.24±3.47) ng/mL, (22.51±4.69) ng/mL], the differences were statistically significant ( t =22.47, 17.96, 12.83, all P < 0.05 ). In autism group, levels of serum Hcy and IL-5 were positively correlated with scores of ABC, CARS and SRS ( r =0.29, 0.53 , 0.54; 0.45, 0.41, 0.50), while negatively correlated with WPPSI-IV score ( r =-0.28, -0.26)(all P <0.05). The folate level was negatively correlated with scores of ABC, CARS and SRS ( r =-0.55, -0.40, -0.25), while positively correlated with WPPSI-IV score ( r =0.41) (all P <0.05). Conclusion Children with ASD show elevated serum Hcy and IL-5 alongside decreased folate,and three markers correlate with core symptoms and intellectual level.

OBJECTIVE To investigate the effects of osthole （OST） on skin wound healing and angiogenesis in rats by regulating the sonic hedgehog （SHH） signaling pathway. METHODS Full-layer skin defect wound model rats were established and then randomly separated into Model group， OST low-dose， medium-dose and high-dose groups （OST-L group， OST-M group， OST-H group， 20， 30， 40 mg/kg OST）， high-dose OST+SHH inhibitor cyclopamide group （OST-H+cyclopamide group， 40 mg/kg OST+10 mg/kg cyclopamide）， with 12 rats in each group. Another 12 rats were selected as the control group. The wound healing of rats on 1， 7 and 14 days of administration was observed， and the wound healing rate of rats in each group was measured. The pathological changes and collagen deposition in rat wound tissue were observed； the levels of angiopoietin-1 （Ang-1） and basic fibroblast growth factor （bFGF） in wound tissue of rats were detected； the relative expressions of vascular endothelial growth factor A （VEGFA） and vascular endothelial growth factor receptor-2 （VEGFR-2） mRNA were also detected in wound tissue of rats； the protein expressions of VEGFA， VEGFR-2， SHH and glioma-associated oncogene homolog-1 （GLI1） were determined in wound tissue of rats. RESULTS Compared with Model group， the healing rate of skin wound， relative expression of collagen protein， the levels of Ang-1 and bFGF， the mRNA and protein expressions of VEGFA and VEGFR-2， and the protein expressions of SHH and GLI1 were all significantly increased in OST-M and OST-H groups （P＜0.05）. The wound tissue underwent significant re- epithelialization， with reduced inflammatory cell infiltration and granulation tissue edema， and an increase in the number of new blood vessels. SHH inhibitor cycloparamide weakened the promoting effects of OST on skin wound healing and angiogenesis in rats. CONCLUSIONS OST may promote skin wound healing and angiogenesis in rats by activating the SHH signaling pathway.

BackgroundPerceived discrimination has been identified as a main risk factor for depression in maintenance hemodialysis patients. Chronic Illness Rejection and Discrimination Scale （CIRDS） is a measure for assessing perceived discrimination in individuals with chronic disease. However， the Chinese version of CIRDS for maintenance hemodialysis patients has not yet been established. ObjectiveTo translate CIRDS into Chinese version and evaluate its reliability and validity in maintenance hemodialysis patients， so as to provide an effective tool for assessing the perceived discrimination among maintenance hemodialysis patients. MethodsThe Brislin's model for translation， back-translation， cross-cultural adaptation and pre-experimentation was utilized to develop a Chinese version of CIRDS. A coherent of 250 maintenance hemodialysis patients attending Taihe Hospital Affiliated to Hubei Medical College， from July to October 2023 were selected as the research subjects. The formal scale was refined by employing item analysis， exploratory factor analysis and confirmatory factor analysis. The validity of the scale was evaluated using content validity and construct validity. The reliability of the scale was evaluated using Cronbach's α coefficient， test-retest reliability and split-half reliability. ResultsThe Chinese version of CIRDS consisted of 11 items， including 2 factors （perceived discrimination and perceived rejection）. The scale-level content validity index （S-CVI） value was 0.898 and the item-level content validity index （I-CVI） values ranged from 0.875 to 1.000. Two common factors were extracted by exploratory factor analysis and explained 65.41% of the total variance. Confirmatory factor analysis also indicated that the model provided a good fit for the data. The Cronbach's α coefficient of the scale was 0.910， with Cronbach's α coefficients of 0.835 and 0.912 for the perceived discrimination and perceived rejection， respectively. The split-half reliability of the scale was 0.803， and the test-retest reliability was 0.920. ConclusionThe Chinese version of CIRDS has excellent reliability and validity， which can be used to evaluate the perceived discrimination in maintenance hemodialysis patients.

BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

This paper discussed the nature of ulcerative colitis， that is deficiency of the root and excess of the branch， from the theory of sweat pore， and to explore the theoretical basis and experience of treating this disease with retention enema of traditional Chinese medicine （TCM）. The main location of this disease is in the intestine. As a part of sweat pore， the intestinal sweat pore serves as the gateway for the ascending， descending， exiting and entering of qi movement in the zang fu （脏腑） organs， meridians and collaterals， as well as the channel for the transportation of qi， blood and body fluids. The constraint and closure of the intestinal sweat pore are the main pathological basis of ulcerative colitis. According to the manifestations of colonoscopy， and the different etiological factors and pathogenesis that lead to the constraint and closure of sweat pore， there should be different treatment focuses such as expelling wind to open sweat pore， clearing fire to open sweat pore， promoting blood circulation to open sweat pore， for which wind-dispersing herbs， heat-clearing herbs， and blood-activating herbs are used accordingly. The method of retention enema can directly induce Chinese medicinal herbs to the affected part， so as to diffuse and unblock the sweat pore， regulate qi and blood， and thus restore the normal function of the intestinal sweat pore.

ObjectiveTo observe the clinical effectiveness and safety of Xiaozhong Zhitong Mixture （消肿止痛合剂） combined with antibiotic bone cement in the treatment of diabetic foot ulcer （DFU） with damp-heat obstructing syndrome. MethodsA total of 72 DFU patients with damp-heat obstructing syndrome were randomly assigned to treatment group （36 cases） and the control group （36 cases）. Both groups received standard treatment and topical antibiotic bone cement for ulcer wounds， while the treatment group received oral Xiaozhong Zhitong Mixture （50 ml per time， three times daily） in additionally. Both groups underwent daily wound dressing changes for 21 consecutive days. Ulcer healing rate， serum levels of tumor necrosis factor-alpha （TNF-α）， interleukin-1 beta （IL-1β）， malondialdehyde （MDA）， superoxide dismutase （SOD）， C-reactive protein （CRP）， and white blood cell （WBC） count were observed before and after treatment， and visual analog scale （VAS） scores for wound pain， traditional Chinese medicine （TCM） syndrome scores， and the DFU Healing Scale （DMIST scale） were also compared. Liver and kidney function were evaluated before and after treatment， and adverse events such as allergic reactions， worsening ulcer pain were recorded. ResultsTotally 35 patients in the treatment group and 33 in the control group were included in the final analysis. The ulcer healing rate in the treatment group was （87.93±9.34）%， significantly higher than （81.82±12.02）% in the control group （P = 0.035）. Compared to pre-treatment levels， both groups showed significant reductions in serum CRP， WBC， MDA， IL-1β， and TNF-α levels， with an increase in SOD level （P＜0.05）. TCM syndrome scores， VAS， and DMIST scores also significantly decreased in both groups （P＜0.05）， with greater improvements in the treatment group （P＜0.05）. No significant adverse reactions were observed in either group during treatment. ConclusionXiaozhong Zhitong Mixture combined with antibiotic bone cement has significant advantages in promoting DFU healing， reducing inflammatory response， and alleviating oxidative stress in DFU patients with damp-heat obstructing syndrome， with good safety for DFU patients with damp-heat obstructing syndrome.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.