OBJECTIVES: The aim of this study was to compare the mechanical properties of various nickel-titanium (NiTi) files with similar tapers and cross-sectional areas depending on whether they were surface-treated. MATERIALS AND METHODS: Three NiTi file systems with a similar convex triangular cross-section and the same ISO #25 tip size were selected for this study: G6 (G6), ProTaper Universal (PTU), and Dia-PT (DPT). To test torsional resistance, 5 mm of the straightened file's tip was fixed between polycarbonate blocks (n = 15/group) and continuous clockwise rotation until fracture was conducted using a customized device. To evaluate cyclic fatigue resistance, files were rotated in an artificial curved canal until fracture in a dynamic mode (n = 15/group). The torsional data were analyzed using 1-way analysis of variance and the Tukey post-hoc comparison test, while the cyclic fatigue data were analyzed using the Mann-Whitney U test at a significance level of 95%. RESULTS: PTU showed significantly greater toughness, followed by DPT and G6 (p < 0.05). G6 showed the lowest resistance in ultimate torsional strength, while it showed a higher fracture angle than the other files (p < 0.05). In the cyclic fatigue test, DPT showed a significantly higher number of cycles to failure than PTU or G6 (p < 0.05). CONCLUSIONS: Within the limitations of this study, it can be concluded that the torsional resistance of NiTi files was affected by the cross-sectional area, while the cyclic fatigue resistance of NiTi files was influenced by the surface treatment.
Fatigue

No abstract available.
Fatigue*

No abstract available.
Fatigue*

Listening effort is defined as a listener's mental exertion required to understand a speaker's auditory message, especially when distracting conditions are present. This review paper analyzed several subjective scaling tools used to measure the listening effort in order to suggest the best tool for use with hearing-impaired listeners who have to expend much effort even in everyday life. We first explained the importance of measuring listening effort and discussed various kinds of measurements. We then analyzed and categorized 15 recently published articles (i.e., from 2014 to 2016) into three topics: performance and listening effort, listening effort and fatigue, and clinical implication of listening effort. We compared the articles in terms of pros and cons and also identified 10 tools for use in the subjective scaling. Although none of these tools were unified or standardized easily, we concluded that 7-point scale would be the most reasonable as a less time-consuming measurement for compartmentalizing the degree of listening effort. If used with objective tools for measuring the listening effort, the subjective scaling could be a powerful tool for clinical use.
Fatigue

No abstract available.
Fatigue* ; Thorax*

No abstract available.
Fatigue* ; Thorax*

Fatigue is a universally common word. The subject has been studied in different disciplines, but the basic concept of the term still remains unidentified. It becomes especially important for the medical communications between nurses and clients. Based on the framework outlined by Walker and Avant(1995), this analysis attempts to clarify and examine the symptoms of fatigue. The attributes of fatigue identified in this paper were exhaustion, weighted psychological burden, shortage in capacity or lack of energy, shortage incapacity(motivation and excitement), and imbalance of energy. Therefore, the definition of fatigue refers to a subjective feeling from various internal or external stresses. The consequences of fatigue bring reduced capacity and imbalance of energy. The symptoms show a homeostatic disability or shortage of capacity (physical, psychological, environmental and physiological factors). A precise understanding of 'fatigue' will be utilized in defining the causes and measuring outcomes. Also, it will enhance the effective medical communications with clients and nurses. In conclusion, more work is needed to develop objective measurement and effective nursing intervention.
Fatigue* ; Nursing

OBJECTIVES: The aim of this study was to investigate the effect of glide path preparation with PathFile and ProGlider nickel-titanium (NiTi) files on the cyclic fatigue resistance of WaveOne NiTi files. MATERIALS AND METHODS: Forty-four WaveOne Primary files were used and divided into four groups (n = 11). In the first group (0 WaveOne), the WaveOne Primary files served as a control group and were not used on acrylic blocks. In the 1 WaveOne Group, acrylic blocks were prepared using only WaveOne Primary files, and in the PF+WaveOne group and PG+WaveOne groups, acrylic blocks were first prepared with PathFile or ProGlider NiTi files, respectively, followed by the use of WaveOne Primary files. All the WaveOne Primary files were then subjected to cyclic fatigue testing. The number of cycles to failure was calculated and the data were statistically analyzed using one-way analysis of variance (ANOVA) and the Tukey honest significant difference multiple-comparison test at a 5% significance level. RESULTS: The highest number of cycles to failure was found in the control group, and the lowest numbers were found in the 1 WaveOne group and the PF+WaveOne group. Significant differences were found among the 1 WaveOne, PF+WaveOne, and control groups (p < 0.05). No statistically significant differences were found between the PG+WaveOne group and the other three groups (p > 0.05). CONCLUSION: Glide path preparation with NiTi rotary files did not affect the cyclic fatigue resistance of WaveOne Primary files used on acrylic blocks.
Endodontics ; Fatigue

The purpose of this study is to correlate the material properties of TiZr alloy material (Roxolid) and the mechanical strength of the implant fixture (BLT) through the maximum compressive load test and the fatigue test. Implant samples were purchased with BLT (Roxolid, Straumann, Switzerland) and Octa1 (cold-worked, Megagen Implant, Korea) fixtures made of two materials (TiZr and cold-worked Ti Grade 4). After the maximum compressive load test, the test specimens were analyzed with a optical microscope to confirm the fracture pattern. After the fatigue test, the samples that passed 5 million cycles were analyzed for the precision fit using a scanning electron microscope. Data were analyzed using Student's t-test (α=0.05). In the compressive load test, the small diameter (3.3 mm) implants with the same length and the common diameter (4.1 mm) implants had fracture or bending regardless of the material in both the test and control groups. The fatigue load showed the same results without significance and the gap between the fixture and abutment interface was within 10 µm in both the test and control groups in the precision fit test. There was no statistically significant difference in the maximum compressive load and fatigue test for the comparison of mechanical strength between two systems (BLT vs. Octa1) with same diameter and length, similar shapes and connections.
Alloys ; Fatigue

No abstract available.
Fatigue* ; Sciatica*