OBJECTIVE: There exists a close relationship between drying of a fresh herb and its preservation and extraction of efficient components. In order to investigate the influences of different drying methods on extraction and separation of ginsenosides, three drying processes, such as drying in the sun, drying in oven and microwave drying, were used to dry fresh ginsengs. METHODS: The ginsenosides of the dry ginsengs were extracted by poaching and microwave heating, and were separated by foam separation. The concentrations of ginsenosides were measured. RESULTS: Microwave drying saved both time and labor, and was favorable for release of ginsenosides. The ginsenosides could be extracted from the dry ginsengs in a shorter time by microwave heating than poaching. The ginsenosides Rb1, Rb2, Rd could be observably concentrated by foam separation. CONCLUSION: Microwave drying and microwave assisted extraction are efficient and economic methods with a high recovery yield of ginsenosides.

Objective To investigate the correlation between the positive rate of PCR-reverse dot blot genotyping test and the loads of the viral nucleic acid. Methods The fluorescent PCR assay was used to detect the high-risk HPV(HR-HPV)DNA loads in the cervical mucus samples from 1162 female pa-tients. Patients with positive HR-HPV DNA were further analyzed by PCR-reverse dot blot hybridization as-say for HPV genotyping. Results The overall positive rate of genotyping test was 68. 8% . The positive rate of genotyping test had a significant positive correlation with the Log Koc of HR-HPV DNA loads(r=0. 944, P﹤0. 01). The quadratic curve fitting formula was Y= -1. 806+0. 558X-0. 031X2(Y for genotyping positive rate,X for Log Koc of HR-HPV DNA loads). There were significant differences with the positive rate of gen-otyping test among patients with different viral loads(P﹤0. 01). When HR-HPV DNA loads were 104-105 copies/ ml,105-106 copies/ ml,106-107 copies/ ml and more than 107 copies/ ml,the positive rate of HPV genotyping test were 27. 8% ,48. 5% ,74. 0% ,97. 5% and 33. 3% ,51. 5% ,78. 0% ,97. 5% respective-ly by using different genotyping detection reagents. Conclusion The positive rate of PCR-reverse dot blot genotyping test was correlated with the loads of HPV nucleic acid.

OBJECTIVE:To compare the composition changes of Aurantii fructus before and after fermentation processing and optimize its fermentation processing technology. METHODS:UPLC was conducted to compare the raw and fermentation processed products of same batch of Aurantii fructus,and ensure the chromatographic peaks after fermentation processing. Using peak areas of 4 chromatographic peaks and mildew characteristics of samples as index,fermentation temperature,humidity and time as factor, L9(34)orthogonal test was designed to optimize the fermentation processing technology,and verified it. RESULTS:After fermenta-tion processing,Aurantii fructus obviously showed 2 new monosaccharide glycosides components;the optimized fermentation tech-nology was as follows as fermentation temperature of 30 ℃,humidity of 70% and time of 7 d;verification test results showed RSD of each indicator of decoction pieces prepared by optimized fermentation technology in 3 tests were lower than 2.0%(n=3). CONCLUSIONS:Fermentation processing may lead obvious chemical composition changes in Aurantii fructus;the optimized fer-mentation processing technology can increase the contents of characteristic peaks.

Objective:To research the solubilization of sulfobutyl ether-β-cyclodextrin ( SEB-β-CD) on voriconazole and the sta-bility of voriconazole with different pH values. Methods:Phase-solubility diagram was applied to study the solubilization of SEB-β-CD on voriconazole. Meanwhile, the impurity of voriconazole was determined to study the stability. Results:SBE-β-CD could increase the solubility of voriconazole significantly and the apparent stability constant was similar within the pH range of 5. 0-8. 0. The stability of voriconazole was decreased with the increase of pH. Conclusion:SEB-β-CD is an ideal solubilizer for voriconazole, while the stability is influenced by pH.

Objective To study the application effect of fibrin sealant(FS) during operation for late-stage portal hypertension caused by schistosomiasis.Methods From Jun,2003 to Jun,2005,92 cases of(late-stage) portal hypertension caused by schistosomiasis treated by portal-systemic disconn-ection(PSD)(operation) were divided into two groups,namely PSD group and PSD+FS group.The early complications such as fever and exudate in splenic fossa,as well as long term complications such as recurrent bleeding,(hypertensive) gastropathy were compared in the 2 groups,and encephalopathy were compared between 64 cases of patients with FS and 28 cases of patients without FS.Results The patients undergoing PSD+FS showed decreased the exudate in splenic fossa and fever(P0 05).Conclusions FS application during operation is effective in attenuating early and long term operative complications of portal hypertension caused by(schistosomiasis),and improving outcome of surgical treatment.

Objective:To investigate the expression of CXC chemokine ligand 11 (CXCL11) in gallbladder cancer (GBC) and its effect on cell proliferation and invasion.Methods:The surgically resected specimens of 47 GBC patients were collected in Lihuili Hospital Affiliated to Ningbo University from January 2017 to December 2020. There were 26 females and 21 males, with the age (62.0±8.2) years. The expression of CXCL11 protein in GBC tissues and corresponding paracancer tissues was detected by immunohistochemistry. Associations between CXCL11 expression and clinicopathological features were analyzed. After co-culturing of GBC-SD cells with exogenous CXCL11, cell counting kit-8 (CCK-8) and Transwell assays were performed to detect cell proliferation and invasion ability. The expression and phosphorylation level of phosphatidylinositol 3 kinase (PI3K) and protein kinase B (Akt) were also detected by Western blot.Results:The positive expression rate of CXCL11 in GBC tissues was significantly higher than that in adjacent paracancerous tissues [63.8% (30/47) vs 31.9% (15/47), χ 2=9.59, P=0.002]. Furthermore, CXCL11 expression was significantly associated with tumor stage (χ 2=6.64, P=0.010) and lymph nodal metastasis (χ 2=7.86, P=0.005). CCK-8 assay revealed that the proliferation ability of GBC-SD cells in CXCL11-treated group significantly increased than that in the control group (absorbance value: 0.59±0.06 vs 0.32±0.04, t=9.64, P<0.001). Transwell assay showed that the cell invasion ability in CXCL11-treated group significantly increased than that in the control group [number of transmembrane cells: (133.4±12.3) cells vs (38.6±4.4) cells, t=16.21, P<0.001]. Western blot analysis showed that the relative expression levels of phosphorylated PI3K (p-PI3K) and phosphorylated Akt (p-Akt) in CXCL11-treated group (0.88±0.06 and 0.83±0.04) were significantly higher than those in the control group (0.17±0.04 and 0.23±0.06), and the differences were statistically significant ( t=18.54, P<0.001 and t=15.21, P<0.001). Conclusion:CXCL11 is highly expressed in GBC and closely related to tumor progression. CXCL11 can promote the proliferation and invasion of GBC cells via PI3K/Akt signaling pathway.

Objective:To evaluate the effect of laparoscopic-assisted anorectoplasty in the treatment of children′s congenital anal atresia.Methods:In this study , 49 children undergoing laparoscopic-assisted anorectoplasty between Mar 2009 and Mar 2015 were compared in terms of outcomes with 42 children under going posterior sagittal anorectoplasty during this period.The post-operative complications, bowel functions and courses were evaluated.Results:The ratio of primary healing in laparoscopic-assisted anorectoplasty was higher than posterior sagittal anorectoplasty(22 % vs. 10%, χ 2=4.306, P=0.038), the age of sequential operation in the former was lower than control group [(9.9±6.5) d vs. (13.4±5.1) d, t=2.823, P=0.003]. The perioperative complications were lower than that in the control group(20% vs. 50%, χ 2=8.817, P=0.003), the bowel function was better than control group(χ 2=7.419, P=0.025). Conclusions:Perioperative complications in laparoscopic-assisted anorectoplasty is lower than posterior sagittal anorectoplasty, with better bowel function and higher primary healing rate.

The purpose of this study was to evaluate the necrosis target and imaging potential of necrotic myocardium of 131I-emodin and 131I-emodic acid. The iodogen coating method was used to radioiodinate emodin and emodic acid with iodine-131. Mice model of muscular necrosis and rat model of myocardial infarction(MI)were established to evaluate the necrosis affinity and imaging potential of 131I-emodin and 131I-emodic acid. Mice were sacrificed at 2, 12 and 24 h after injection respectively. The radioactive uptake in major organs and necrotic muscle were calculated by a γ-counter. At 6 h after administration, SPECT/CT imaging of necrotic myocardium in rats, biodistribution detection, histopathological analysis were applied to evaluate their necrosis affinity and imaging potential. The results of biodistribution from mice demonstrated that 131I-emodin and 131I-emodic acid showed peculiar necrosis target and exhibited an obvious clearance of radioactivity from normal organs. On SPECT/CT images, relatively high uptake as a hot spot was shown in the heart of the model rat, while no obvious uptake was observed in the heart of the control rat. The radioactivity ratios of necrotic to normal myocardium of 131I-emodin and 131I-emodic acid amounted up to 9. 72 and 13. 14 by quantitative autoradiography analysis, respectively. These results suggested that 131I-emodin and 131I-emodic acid possess the necrosis target and imaging potential of necrotic myocardium.

OBJECTIVETo establish a method for the determination of N-butylbenzene in the workplace atmosphere by gas chromatography.

METHODSN-butylbenzene in the workplace atmosphere was collected by activated charcoal tube, desorbed using carbon disulfide, and determined by capillary column gas chromatography.

RESULTSThe method showed a linear relationship within the range of 0∼100 µg/ml. The regression equation was y = 0.870x-0.014, with the correlation coefficient r being 0.999 9. The limit of detection was 0.32 µg/ml. The minimum detectable concentration was 0.21 mg/m³ (with sampled air volume of 1.5 L). The average spike recovery rate was 97.8%∼102.6%. The within-run precision was 3.06% and the between-run precision was 3.64%. The rate of average desorption was 99.6%. The breakthrough volume was 6.34 mg. The sampling efficiency was 100%. The samples could be stored for at least 7 days at room temperature.

CONCLUSIONAll parameters of the method meet the requirements of GBZ/T 210.4-2008 "Guide for establishing occupational health standards-Part 4 Determination methods of air chemicals in workplace" and can be applied for the determination of N-butylbenzene in workplace atmosphere.

Air ; analysis ; Air Pollutants, Occupational ; analysis ; Benzene Derivatives ; analysis ; Chromatography, Gas ; methods ; Linear Models ; Workplace

Objective : To evaluate the clinical outcomes of all-ceramic crowns whose oral digital impressions were scanned by 3Shape Trios. Methods : All the impressions were scanned by Trios and all the crowns were fabricated according to the standard procedure. The restoration quality were evaluated using modified United States Public Health Service (USPHS) criteria one year after treatment. Restoration integrity、 marginal adaptation、enamel wear、 color satisfaction and gingival index (GI) of the prostheses were evaluated according to the modified USPHS criteria. Results: The clinical 1 year survival rate of 92 porcelain crowns fabricated by 3-shape Trios digital impression and made by CAD/CAM was 100%. The scored A rates of restoration integrity、 marginal adaptation、 enamel wear、 secondary caries、color satisfaction and gingival index of the prostheses were 100%、91.3%、 98%、95.6%、96.7% and 94.7% after 1 year, respectively. Conclusion The clinical outcomes of all-ceramic crowns whose oral digital impressions were scanned by 3Shape Trios and whose crowns were made by CAD-CAM are satisfying.