Objective To construct and evaluate a prognostic model for clear cell renal cell carcinoma(ccRCC)based on preoperative lipid ratios, cM0(i+)staging, and other clinical characteristics, so as to provide a precise tool for clinical prognosis assessment. Methods A retrospective analysis was conducted on the clinical data of 215 ccRCC patients treated in our hospital during May 2014 and May 2023. Lipid ratios were calculated using preoperative lipid data, and patients were divided into cM0(i+)stage or cM0 stage according to postoperative circulating tumor cells(CTCs)test results. The optimal lipid ratio and cutoff value were selected using receiver operating characteristic(ROC)curves and the X-tile method. Patients were subdivided into three groups based on the level of the low-density lipoprotein cholesterol to non-low-density lipoprotein cholesterol ratio(LNLR)and cM0(i+)staging:Group A [LNLR＞1.68 and diagnosed with cM0(i+)], Group B [LNLR＞1.68 or diagnosed with cM0(i+)], and Group C(LNLR ≤1.68 and diagnosed with cM0). Kaplan-Meier survival analysis was used to plot survival curves for patients in different groups. The log-rank test was employed to compare differences in recurrence-free survival(RFS)among the subgroups. Multivariate Cox regression analysis was conducted to identify the independent risk factors influencing RFS, and a nomogram prediction model was constructed based on these results. The predictive performance of the model was validated using ROC curves, calibration curves, and decision curves. Results ROC curves were plotted for lipid markers, and LNLR was identified as the most predictive for RFS. Its optimal cutoff point was 1. 68. Patients in Group A experienced a significantly shorter postoperative RFS. Multivariate Cox regression analysis identified preoperative LNLR, cM0(i+)staging, pathological grade, and stage as independent risk factors for RFS. A nomogram model was constructed based on these risk factors. The area under the ROC curve(AUC)for 1-, 3-, and 5-year RFS was 0.896(95% CI:0.8121-0.9627), 0.890(95%CI:0.7879-0.9641), and 0.870(95%CI:0.7697-0.9526), indicating good discriminatory ability and predictive performance. Calibration plots demonstrated good agreement between predicted and actual outcomes. Clinical decision curve analysis showed high clinical net benefit. Conclusion Preoperative LNLR level is an independent risk factor for RFS in ccRCC patients. The prognostic prediction model based on LNLR, cM0(i+)staging, patient pathological grade, and staging demonstrates good predictive performance for RFS and holds potential clinical application value.

Lung transplantation is a definitive treatment for end-stage lung disease and can significantly improve patient prognosis. However, postoperative complications such as infection, rejection, ischemia-reperfusion injury and chronic lung allograft dysfunction intertwine to form a complex pathological network, posing persistent challenges to long-term patient survival. In 2025, research teams worldwide have made systematic progress in the field of basic lung transplantation research. By integrating cutting-edge technologies including single-cell multi-omics, spatial transcriptomics and novel animal models, significant breakthroughs have been achieved in the evolutionary dynamics of drug-resistant infections, molecular mechanisms of immune regulation, programmed cell death, optimization of donor lung protection strategies and early warning of chronic lung allograft dysfunction. This article systematically reviews the representative advances in basic lung transplantation research worldwide in 2025, and deeply analyzes the implications of mechanistic breakthroughs for optimizing diagnosis and treatment strategies, aiming to anchor the direction for innovative breakthroughs and clinical translation in basic lung transplantation research.

Electroencephalogram (EEG) is a non-invasive, high temporal-resolution technique for monitoring brain activity. However, affected by the volume conduction effect, EEG has a low spatial resolution and is difficult to locate brain neuronal activity precisely. The surface Laplacian (SL) technique obtains the Laplacian EEG (LEEG) by estimating the second-order spatial derivative of the scalp potential. LEEG can reflect the radial current activity under the scalp, with positive values indicating current flow from the brain to the scalp (“source”) and negative values indicating current flow from the scalp to the brain (“sink”). It attenuates signals from volume conduction, effectively improving the spatial resolution of EEG, and is expected to contribute to breakthroughs in neural engineering. This paper provides a systematic overview of the principles and development of SL technology. Currently, there are two implementation paths for SL technology: current source density algorithms (CSD) and concentric ring electrodes (CRE). CSD performs the Laplace transform of the EEG signals acquired by conventional disc electrodes to indirectly estimate the LEEG. It can be mainly classified into local methods, global methods, and realistic Laplacian methods. The global method is the most commonly used approach in CSD, which can achieve more accurate estimation compared with the local method, and it does not require additional imaging equipment compared with the realistic Laplacian method. CRE employs new concentric ring electrodes instead of the traditional disc electrodes, and measures the LEEG directly by differential acquisition of the multi-ring signals. Depending on the structure, it can be divided into bipolar CRE, quasi-bipolar CRE, tripolar CRE, and multi-pole CRE. The tripolar CRE is widely used due to its optimal detection performance. While ensuring the quality of signal acquisition, the complexity of its preamplifier is relatively acceptable. Here, this paper introduces the study of the SL technique in resting rhythms, visual-related potentials, movement-related potentials, and sensorimotor rhythms. These studies demonstrate that SL technology can improve signal quality and enhance signal characteristics, confirming its potential applications in neuroscientific research, disease diagnosis, visual pathway detection, and brain-computer interfaces. CSD is frequently utilized in applications such as neuroscientific research and disease detection, where high-precision estimation of LEEG is required. And CRE tends to be used in brain-computer interfaces, that have stringent requirements for real-time data processing. Finally, this paper summarizes the strengths and weaknesses of SL technology and envisages its future development. SL technology boasts advantages such as reference independence, high spatial resolution, high temporal resolution, enhanced source connectivity analysis, and noise suppression. However, it also has shortcomings that can be further improved. Theoretically, simulation experiments should be conducted to investigate the theoretical characteristics of SL technology. For CSD methods, the algorithm needs to be optimized to improve the precision of LEEG estimation, reduce dependence on the number of channels, and decrease computational complexity and time consumption. For CRE methods, the electrodes need to be designed with appropriate structures and sizes, and the low-noise, high common-mode rejection ratio preamplifier should be developed. We hope that this paper can promote the in-depth research and wide application of SL technology.

BACKGROUND: Chronic kidney disease (CKD)-associated anemia (CKD-anemia) is associated with poor survival, and hemoglobin targets are often not achieved with current therapies. Phase 3 trials have demonstrated the treatment efficacy of roxadustat for CKD-anemia. This phase 4 study aims to evaluate the long-term (52-week) safety and effectiveness of roxadustat in a broad real-world patient population with CKD-anemia with and without dialysis in China. METHODS: This Phase 4 multicenter, open-label, prospective study, conducted from 24 November 2020 to 11 November 2022, evaluated the long-term safety and effectiveness of roxadustat for CKD-anemia in China. Patients aged ≥18 years with CKD-anemia with or without dialysis were included. The initial oral dose was 70-120 mg (weight-based followed by dose adjustment) over 52 weeks. The primary endpoint was safety based on adverse events (AEs). The secondary endpoints were hemoglobin changes from baseline and the proportion of patients who achieved mean hemoglobin ≥100 g/L. Effectiveness evaluable populations 1 (EE1) and EE2 included roxadustat-naïve and previously roxadustat-treated patients, respectively. The safety analysis set (SAF) included all patients who received ≥1 occasion. RESULTS: The EE1, EE2, and SAF populations included 1804, 193, and 2021 patients, respectively. In the SAF, the mean age was 50 ± 14 years, and 1087 patients (53.8%) were male. Mean baseline hemoglobin was 96.9 ± 14.0 g/L in EE1 and 100.3 ± 12.9 g/L in EE2. In EE1, the mean (95% confidence interval) hemoglobin changes from baseline over weeks 24-36 and 36-52 were 14.2 (13.5-14.9) g/L and 14.3 (13.5-15.0) g/L, respectively. Over weeks 24-36 and 36-52, 83.3% and 86.1% of patients in EE1 and 82.7% and 84.7% in EE2 achieved mean hemoglobin ≥100 g/L, respectively. In the SAF, 1643 (81.3%) patients experienced treatment-emergent AEs (TEAEs). Overall, 219 (10.8%) patients experienced drug-related TEAEs. Thirty-eight (1.9%) patients died of TEAEs (unrelated to the study drug). Vascular access thrombosis was uncommon. CONCLUSIONS: Roxadustat (52 weeks) increased hemoglobin and maintained the treatment target in Chinese patients with CKD-anemia with acceptable safety, supporting its use in real-world settings. REGISTRATION Chinese Clinical Trial Registry ( www.chictr.org.cn ) ChiCTR2100046322; CDE ( www.chinadrugtrials.org.cn ) CTR20201568.
Humans ; Male ; Female ; Anemia/etiology* ; Middle Aged ; Renal Insufficiency, Chronic/complications* ; Glycine/adverse effects* ; Isoquinolines/adverse effects* ; Aged ; Prospective Studies ; Adult ; Hemoglobins/metabolism* ; Treatment Outcome ; China ; Registries ; East Asian People

This study aims to reveal the effect and mechanism of Gentianella turkestanorum total extract(GTI) in ameliorating non-alcoholic steatohepatitis(NASH). UPLC-Q-TOF-MS was employed to identify the chemical components in GTI. SwissTarget-Prediction, GeneCards, OMIM, and TTD were utilized to screen the targets of GTI components and NASH. The common targets shared by GTI components and NASH were filtered through the STRING database and Cytoscape 3.9.0 to identify core targets, followed by GO and KEGG enrichment analysis. AutoDock was used for molecular docking of key components with core targets. A mouse model of NASH was established with a methionine-choline-deficient high-fat diet. A 4-week drug intervention was conducted, during which mouse weight was monitored, and the liver-to-brain ratio was measured at the end. Hematoxylin-eosin staining, Sirius red staining, and oil red O staining were employed to observe the pathological changes in the liver tissue. The levels of various biomarkers, including aspartate aminotransferase(AST), alanine aminotransferase(ALT), hydroxyproline(HYP), total cholesterol(TC), triglycerides(TG), low-density lipoprotein cholesterol(LDL-C), high-density lipoprotein cholesterol(HDL-C), malondialdehyde(MDA), superoxide dismutase(SOD), and glutathione(GSH), in the serum and liver tissue were determined. RT-qPCR was conducted to measure the mRNA levels of interleukin 1β(IL-1β), interleukin 6(IL-6), tumor necrosis factor α(TNF-α), collagen type I α1 chain(COL1A1), and α-smooth muscle actin(α-SMA). Western blotting was conducted to determine the protein levels of IL-1β, IL-6, TNF-α, and potential drug targets identified through network pharmacology. UPLC-Q-TOF/MS identified 581 chemical components of GTI, and 534 targets of GTI and 1 157 targets of NASH were screened out. The topological analysis of the common targets shared by GTI and NASH identified core targets such as IL-1β, IL-6, protein kinase B(AKT), TNF, and peroxisome proliferator activated receptor gamma(PPARG). GO and KEGG analyses indicated that the ameliorating effect of GTI on NASH was related to inflammatory responses and the phosphoinositide 3-kinase(PI3K)/AKT pathway. The staining results demonstrated that GTI ameliorated hepatocyte vacuolation, swelling, ballooning, and lipid accumulation in NASH mice. Compared with the model group, high doses of GTI reduced the AST, ALT, HYP, TC, and TG levels(P<0.01) while increasing the HDL-C, SOD, and GSH levels(P<0.01). RT-qPCR results showed that GTI down-regulated the mRNA levels of IL-1β, IL-6, TNF-α, COL1A1, and α-SMA(P<0.01). Western blot results indicated that GTI down-regulated the protein levels of IL-1β, IL-6, TNF-α, phosphorylated PI3K(p-PI3K), phosphorylated AKT(p-AKT), phosphorylated inhibitor of nuclear factor kappa B alpha(p-IκBα), and nuclear factor kappa B(NF-κB)(P<0.01). In summary, GTI ameliorates inflammation, dyslipidemia, and oxidative stress associated with NASH by regulating the PI3K/AKT/NF-κB signaling pathway.
Animals ; Non-alcoholic Fatty Liver Disease/genetics* ; Mice ; Network Pharmacology ; Male ; Drugs, Chinese Herbal/administration & dosage* ; Chromatography, High Pressure Liquid ; Liver/metabolism* ; Mice, Inbred C57BL ; Humans ; Mass Spectrometry ; Tumor Necrosis Factor-alpha/metabolism* ; Disease Models, Animal ; Molecular Docking Simulation

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.