AIM: To compare two methods of HPLC-MS/MS and MEIA to monitor the tacrolimus concentrations for organ transplantation patient.METHODS: After developing and validating the HPLC-MS/MS method to determine the concentrations of tacrolimus,the tacrolimus samples were quantitated by two methods of HPLC-MS/MS and MEIA,respectively.Evaluate two methods by statistical analysis of quantitative results.RESULTS: The mean concentration were(4.86?0.46) ng/mL by HPLC-MS/MS and(5.52?0.43) ng/mL by MEIA.The coefficient correlation of two methods was 0.8771,and the two methods have good correlations in statistics.The mean concentration ratio was(90.3?5.3)%.CONCLUSION: The HPLC-MS/MS method is a more precise method for to determining the effective concentration of tacrolimus,which is suitable for daily TDM.

Great difficulties were existed in clinical teaching in hospitals for infectious diseases. Therefore,a centralized hospital teaching rounds,a new clinical teaching practice was taken in a hospital for infectious diseases. During seven years' practice,a basic mode of centralized hospital teaching rounds was established,which contains many aspects such as organizational form,time arrangement,case se-lection and operation procedures. Its effectiveness was evaluated accoding to the following aspects:number of people attending hospital teaching rounds,composition of these people,satisfaction of these people, comparison of ward rounds data recorded nowadays and 7 years before and assembling all the rounds records into a book. Results indicated that this measure overcame the limitations of the specialized hospi-tals to some extent and played an important role in improving clinical teaching quality.

BACKGROUND: The rudiment of tissue engineering is to obtain tissue from patients. The cells are expanded into a population through cellular culture, and seeded into scaffolds, which can accommodate and guide the growth and proliferation of new cells in the three-dimensional scaffolds. At last, the constructed tissue is transplanted in vivo to repair or replace damaged or diseased tissues. Afterward neovascularization of the graft, the scaffolds are absorbed gradually. Finally, the new tissue replaces completely the damaged or diseased tissuesOBJECTIVE: To evaluate the feasibility of designing and fabricating customized anatomical-shaped bone tissue-engineering scaffolds with reverse engineering and rapid prototyping (RP) techniques. To avoid the disadvantage of the conventional fabricated methods of the scaffolds.DESIGN: The method of fabricating customized anatomical-shaped bone tissue engineering scaffolds.SETTING: Computer-aided design (CAD) of the scaffold was conducted in CAD training center, Guangdong Machinery Research Institute. Rapid prototyping fabrication of the scaffold was conducted in Guangdong Longchuangyu Limited Cooperation. The scaffold was fabricated by sterophotocureable technology and was made of photosensitized resin.METHODS: This experiment was carried out at the Center of Department of Traumatic Orthopedics, General Hospital of Guangzhou Military Area Command of Chinese PLA from October 2004 and January 2005. According to reverse engineering, layered image information of skeleton of the patients was scanned with CT/MRI. Anatomical models of region of interesting were created by means of CT or MRI three-dimensional reconstruction and surface reconstruction. The internal construction of the scaffolds was designed with CAD software in the outline of the anatomical models to develop computer-aided model. The prototypes of the scaffolds were fabricated by RP process.MAIN OUTCOME MEASURES: ①CT/MRI scanning, three-dimensional reconstruction, anatomical modeling; ② computer-aided design of customized bone tissue engineering scaffolds; ③rapid prototyping fabrication of customized bone tissue engineering scaffold.RESULTS: ①Anatomical models of bone joint were established through CT/MRI three-dimensional reconstruction. ② The internal structure of the scaffold was designed to establish the entity model of bone tissue engineering scaffold successfully with computer-aided design software. ③ CAD model of bone tissue engineering scaffold guided prototypes to develop the customized anatomical-shaped bone tissue engineering scaffolds. The internal structure of bone tissue engineering scaffold was fine and had high degree of porosity-and pore interconnectivity.CONCLUSION: Customized anatomical-shaped bone tissue engineering scaffolds can be fabricated with reverse engineering and RP technology. Among all RP processes, stereophotocureable technology (SLA) is the best one with good precision, smooth surface and good shaping.

Objective To establish multidrug resistant (mdr) model in nude mice via orthotopic implantation of human multidrug resistant hepatocellular carcinoma cells. Methods Orthotopic mdr1 hepatoma were obtained by injecting human hepatocellular carcinoma cells HepG2 and multidrug resistant human hepatocellular carcinoma cells HepG2/ADM subserosally into the mouse liver. Ultrasonography and laparotomy were used to detect tumor growth, and integrity of MDR1 gene from multidrug resistant human hepatocellular carcinoma cells HepG2/ADM. Implantated tumor tissues were amplificated by long PCR technique and sequenced. Furthermore, the MDR1 mRNA and P-gp protein expression were evaluated by reverse transcription and polymerase chain reaction ( RT-PCR )、 Western blotting、immunohistochemistry ( IHC). Results The successful rate of tumor implantation was 100% and multidrug resistant induced rate was 95% (19/20) respectively. 3. 8 kb mdrl integrity gene band was identified from both HepG2/ADM cells line and corresponding implantated tumor tissues by long RT-PCR technique. MDR1 gene sequence was in coincidence to that reported in genebank. The expression of MDR1 mRNA and P-gp protein in multidrug resistant groups were significantly higher than that in control groups. P-gp protein expression in multidrug resistant groups (42.6% ? 1.7%) was higher than controls (2.6% ? 0. 1%), P

OBJECTIVEThe aim of this study is to analyze the processing mechanism of calamine.

METHODXRD, TEM and IR were adopted to analyze the structures and the components of original and calcined calamine. Their antibacterial activities were also determined.

RESULTThe results indicated that zinc carbonate in original calamine was decomposed into zinc oxide after processing at 700 degrees C for 1 hour using original calamine of 40 mesh, and the particle size was smaller than before processing. All of ZnO, ZnCO3 and Zn5 (CO3) 2 (OH) 6 had antibacterial activitives.

CONCLUSIONOriginal calamine is deposed to ZnO after being calcined for 1 h at 700 degrees C and wet milling. The content of ZnO and antibacterial activity of calcined calamine are better than those of original calamine, moreover, the particle size diminishes and become dimensional uniformity, and the contents of dissolved impurities is decreased. The antibacterial activitives of original and calcined calamine are decided by zinc.

Anti-Bacterial Agents ; chemistry ; pharmacology ; Bacteria ; drug effects ; Drug Combinations ; Ferric Compounds ; chemistry ; pharmacology ; Particle Size ; Zinc Oxide ; chemistry ; pharmacology

OBJECTIVELuteolin, a flavone, has considerable neuroprotective effects by its anti-oxidative mechanism. However, it is still unclear whether luteolin can protect neurons against oxygen-glucose deprivation/reperfusion (OGD/R) induced injury.

METHODAfter 2 hours oxygen-glucose deprivation and 24 hours reperfusion treatment in primary cultured hippocampal neurons, the neuron viability, survival rate and apoptosis rate were evaluated by MTT assay, lactate dehydrogenase (LDH) leakage assay and Hoechst staining, respectively. The activity of Na+/K+ -ATPase was examined in cultured neurons or in the hippocampus of SD rats treated by 10 minutes global cerebral ischemia and followed 24 hours reperfusion.

RESULTTreatment by OGD/R markedly reduced neuronal viability, increased LDH leakage rate and increased apoptosis rate. Application of luteolin (10-100 micromol x L(-1)) during OGD inhibited OGD/R induced neuron injury and apoptosis in a dose-dependent manner. Compared to the control group or OGP/R-treated neurons, the activity of Na+/K+ -ATPase was significantly suppressed in global ischemia/reperfusion group or OGD/R-treated neurons. Application of luteolin during ischemia or OGD preserved the Na+/K+ -ATPase activity. Furthermore, inhibition of Na+/K+ -ATPase with ouabain attenuated the protective effect afforded by luteolin.

CONCLUSIONThe data provide the evidence that luteolin has neuroprotective effect against OGD/R induced injury and the protective effect may be associated with its ability to improve Na+/K+ -ATPase activity after OGD/R.

Animals ; Antioxidants ; pharmacology ; Apoptosis ; drug effects ; Cell Hypoxia ; Glucose ; metabolism ; Luteolin ; pharmacology ; Neurons ; drug effects ; enzymology ; metabolism ; pathology ; Neuroprotective Agents ; pharmacology ; Rats ; Rats, Sprague-Dawley ; Reperfusion Injury ; enzymology ; metabolism ; pathology ; prevention & control ; Sodium-Potassium-Exchanging ATPase ; metabolism

The use of mechanical ventilation is more common in the diagnosis and treatment of clinical critically ill patients. However, in the process of mechanical ventilation, it may be difficult to withdraw from the machine due to various factors other than the primary disease. Among them, intra-abdominal hypertension, accumulation of analgesic and sedative drugs, and weakness of diaphragmatic function are common causes of difficulty in weaning. Acupuncture has obvious efficacy in regulating gastrointestinal function, exerting analgesic and sedative effect and improving muscle weakness. Acupuncture intervention can optimize the scheme of mechanical ventilation weaning, and improve the success rate by correcting different concurrent factors.

Endoscopic teaching has always been a difficult point in clinical medical skill teaching.A standardized teaching plan was set up for the beginners to learn gastroscopy skills,which took 16 weeks.This training program included teaching the basic structure of a gastroscopy,the theory of operation skills,cleaning and disinfection of gastroscopy,and the operation of the virtual digestion endoscopy simulation training system.Only by passing the examinations of what mentioned above,could a beginner do gastroscopy of clinical subjects and write reports.According to a questionnaire survey of 15 trainees,100％ of trainees believed that virtual digestive endoscopy was necessary for the teaching of endoscopic skills.It was believed that the teaching plan were very strict and strict with 63.3％ and 33.3％ respectively.Therefore,this teaching plan with higher recognition and acceptance is suitable for the clinicians specializing in liver diseases and infectious diseases in infectious diseases specialist hospitals,who want to learn gastroscopy skills.

Objective:To evaluate the application effect of the "group-based" teaching assistant (TA) guidance model in homogenized clinical skill training.Methods:A pilot study was conducted on the cardiopulmonary resuscitation training course, and 32 students majoring in clinical integrative Chinese and Western medicine (five-year program) who were admitted to Shanghai University of Traditional Chinese Medicine in 2018 were randomly divided into control group ( n = 16) and TA group ( n = 16). The control group received traditional teaching methods, and the TA group was further divided into subgroups A, B, C, and D, with four graduate TAs providing group-based teaching. The groups were compared in terms of their satisfaction and test scores. SPSS 25.0 was used for t-test and analysis of variance. Results:The satisfaction survey showed that compared with the control group, the TA group had significantly higher degree of satisfaction with the increased practical opportunities, clinical skill practical ability, learning effect, and overall satisfaction. The immediate test showed that there was no significant difference in test score between the TA group (85.19±2.93) points and the control group (82.75±4.52) points. The test 30 days later showed that the TA group (83.50±5.13) points had a significantly higher test score than the control group (74.68±3.87) points, and the control group had a significantly lower test score than that in the immediate test ( P <0.001); however, there was no significant difference in the TA group's score between the immediate test and the test 30 days later. Conclusion:The "group-based" TA guidance model has a good effect in homogenized clinical skill training, and has a stable long-term effect, with high student satisfaction.

Objective:To explore the surgical procedure and effect of reconstruction of soft tissue defects in the distal segment of dorsal finger with a perforator(joint branch) flap of proper palmar digital artery combined with a dorsal metacarpal artery flap.Methods:From January 2019 to June 2022, 9 patients with soft tissue defects in distal dorsal finger, mostly with avulsion at the extensor tendon insertion point, were treated in Department of Hand and Foot Microsurgery, the Affiliated Hospital of Qingdao University. The defect areas were 1.0 cm×1.0 cm-2.5 cm×2.0 cm. Steel wires were used to reconstruct the extensor tendon insertion point. The defects were reconstructed by a perforator(joint) flap of proximal phalanx artery and a dorsal metacarpal artery flap was used to repair the donor site for proximal flap. Postoperative follow-up and evaluation included flap survival, flap appearance, scars and function of interphalangeal and metacarpophalangeal joints, through outpatient clinical, WeChat and so on.Results:The flap of digital artery perforator (joint branch) and the fasciocutaneous flap of dorsal metacarpal artery all survived. One flap of the digital artery perforator(joint branch) appeared purple and tension blisters after surgery. The stitches of the pedicle of the flap were partially dismantled at 36-48 hours after surgery. The flap was then turned to ruddy in colour 7 days after surgery. The wounds of the distal finger joint and nail bed healed well without redness and infection. The postoperative follow-up lasted for 5 to 12 months, 9 months in average. The appearance, colour and texture of the skin at distal finger were similar to those at the dorsal proximal finger and dorsal palm. Sensation recovered well, all flaps exceeding S 3. The two-point resolution (TPD) was 8-10 mm, with an average of 9.5 mm. According to the Evaluation Standard of Upper Limb Partial Functional of Hand Surgery of Chinese Medical Association, 5 cases were in excellent and 4 in good. Conclusion:The perforator(joint branch) flap of proper palmar digital artery combined with a dorsal metacarpal artery flap is simple and safe treatment. It has a fast functional recovery with an aesthetic appearance in reconstruction of the soft tissue defect in distal segment of dorsal finger.