Objective:To simultaneously determine the contents of ginsenoside Rb1 , ginsenoside Rb2 , ginsenoside Rb3 , ginsen-oside Re, ginsenoside Rg1 , ginsenoside Rf and ginsenoside Ro in Qipi pills by HPLC-QTOF-MS. Methods: The determination was performed on an Agilent Poroshell 120 EC-C18 column (2. 1 mm × 50 mm,2. 7 mm) with mobile phase consisting of acetonitrile( A)-water(B, containing 0. 1% formic acid) with gradient elution. The flow rate was 0. 21 ml·min-1. The column temperature was 30℃. The MS instrument was equipped with an ESI+ ion source. The exacted ion chromatograms were used to determine the quantities of different compounds in the samples while the mass spectra of product ions were used for confirming the compounds. Results:All the 7 kinds of ginsenoside showed good linearity (r>0. 9993). The RSDs of precision, repeatability and stability tests were all less than 5%. The average recoveries were within the range of 97. 11%-101. 98%. Conclusion:The method is simple, rapid and reliable with high specificity, which can be used for the quality control of Qipi pills.

Objective: To investigate the hydrolysis conversion rate of alcohol amine-diterpene alkaloids from aconitum alkaloids, hydrolyze aconitum alkaloids reference substance, calculate the amount of alcohol amine-diterpene alkaloids in the hydrolysis solution by the hydrolysis conversion rate, which is used as the amount of alcohol amine-diterpene alkaloids reference substance, and establish a content determination method for aconine, hypaconitine and aconine in Aconiti radix cocta.Methods: Through controlling the hydrolysis conditions of aconitine, hypaconitine and mesaconitine, aconine, hypaconitine and aconine were obtained.The determination was performed on an Agilent ZORBAX Extend-C18 RRHT(2.1 mm×50 mm,1.8 μm) column with the mobile phase consisting of methanol(A)-water(B containing 0.1% formic acid and 2.5 mmol·L-1 ammonium acetate) with gradient elution by HPLC-QTOF-MS.The flow rate was 0.21 ml·min-1.The column temperature was 30 ℃.MS instrument was equipped with an ESI+ ion source.Results: Under the hydrolysis conditions of this study, the conversion rate of aconine from aconitine was 99.64%;the conversion rate of hypaconitine from hypaconine was 99.94%;the conversion rate of mesaconitine from mesaconine was 99.57%.The HPLC-QTOF-MS methodological investigation showed the 3 kinds of alcohol amine-diterpene alkaloids were with good linearity (r>0.999 1).The RSD of the precision, repeatability and stability tests were less than 5%.The average recoveries were within the range of 99.43%-100.10%.Conclusion: The validated method is simple, specific, reliable and reproducible.In the absence of reference substance, it can be used for the quality control of the herbs of Aconitum L.species.

Objective:To develop a method of quantitative analysis of multi-components by single marker( QAMS) for nine kinds of alkaloids in Xiaohuoluo pills. Methods: An HPLC-QTOF-MS method with an Agilent ZORBAX Extend-C18 RRHT(2. 1 mm × 50 mm,1. 8 μm) column was applied. The flow rate was 0. 21 ml·min-1 . The column temperature was 30 ℃. The mobile phase was methanol (A)-water (B;containing 0. 1％ formic acid and 2. 5 mmol·L-1 ammonium acetate) with gradient elution. The aconitine was used as the internal standard, and the relative correction factor ( RCFs) of hypaconitine, mesaconitine, benzoylaconine, benzoyl-hypaconine, benzoylmesaconine, aconine, hypaconine and mesaconine was respectively established, and the reproducibility inspection on the RCF was performed. The contents of the other 8 kinds of aconitum alkaloids were calculated according to the RCF. At the same time, an external standard method ( ESM) was performed for the content determination of the nine alkaloids. The results of the two methods were compared. The feasibility and accuracy of the QAMS method were verified. Results:Within a certain range,the RCF of hypacontine,mesacontine, benzoylaconine, benzoylhypaconine, benzoyl mesaconine, aconine, hypaconine and mesaconine to aconitine was 1. 736,1. 979,1. 0471,0. 9242,1. 2901,1. 3078,1. 2859,and 1. 0948,respectively. The QAMS method was established for determi-ning alkaloids. There were no significant differences between the results of the QAMS method and those of the external standard method ( ESM) . Conclusion:With the validation of methodology, the method established in our study can be used for the content determina-tion of aconitine, hypaconitine, mesaconitine, benzoylaconine, benzoylhypaconine, benzoylmesaconine, aconine, hypaconine and mesaconine in xiaohuoluo pills.

Objective:To establish a GC method for the imultaneous determination of cinnamaldehyde, bornyl acetate, costunol-ide,dehydrocostus lactone,magnolol and honokiol in Dutong pills. Methods: The determination was performed on an HP-5 column (30 m ×0.32 mm,0.25 μm) with programmed temperature. The carrier gas was nitrogen with the flow rate of 2.0 ml·min-1. The injection volumn was 1 μl and the sample split ratio was 5:1. The inlet temperature was 280 ℃. The detector was a flame ionization detector with temperature at 300 ℃. Results:The linear ranges were 32.28-516.40 μg·ml-1for cinnamaldehyde(r=0.999 3), 27.06-433.00 μg·ml-1for bornyl acetate(r=0.999 2),25.65-410.40 μg·ml-1for costunolide(r=0.999 3),26.10-417.60 μg ·ml-1for dehydrocostus lactone(r=0.999 3),24.01-384.20 μg·ml-1for magnolol(r=0.999 0) and 18.32-293.10 μg·ml-1 for honokiol(r=0.999 4). The average recovery was 99.71%(RSD=0.67%),99.34%(RSD=1.18%),100.16%(RSD=0. 34%),100.40%(RSD=0.39%),99.32%(RSD=1.22%) and 99.58%(RSD=0.58%)(n=6),respectively. Conclusion:The method is simple,sensitive and accurate,can be used to supplement the insufficient quality control of Dutong pills.

Objective To evaluate the relationship between concurrent myocardial bridge at anterior descending branch and the formation of coronary atherosclerosis plaques by using transluminal attenuation gradient (TAG). Methods A total of 198 patients underwent coronary CTA in Renji Hospital of Shanghai Jiaotong University School of Medcine from June 2017 to March 2018 and the results showed the anterior descending myocardial bridge. The data were retrospectively analyzed. All patients completed the coronary CTA with 320?row detector CT. According to the manifestations of myocardial bridge on CTA,the patients were divided into deep and superficial myocardial bridge groups. According to whether the patients were complicated with coronary atherosclerotic plaques, they were divided into isolated myocardial bridge group and myocardial bridge with coronary atherosclerotic plaque group. The thickness and length of myocardial bridge, the volume of coronary atherosclerotic plaques at the site of myocardial bridge, the pre?bridge and post?bridge TAG values, and the K ratio were recorded. Independent sample t test (normal distribution) or Mann?Whitney U test (skewed distribution) was used to compare the difference of measurement data among different groups. χ2 test was used to compare the difference of enumeration data among different groups. Pearson correlation test was used to analyze the correlation among pre?bridge and post?bridge TAG values,K ratio,thickness and length of myocardial bridge and plaque volume. The influence of above indexes on plaque occurrence was analyzed by binary logistic regression analysis. The relationship between main influence indexes and plaque formation was analyzed by receiver operating characteristic curve (ROC). Results Ninety nine patients had isolated myocardial bridge,99 with myocardial bridge and coronary atherosclerotic plaques,27 with superficial myocardial bridge and 171 with deep myocardial bridge. All atherosclerotic plaques occurred in pre?bridge and the mean volume of plaques was (91.6±83.0)mm3. The differences in sex, age, height, body weight and body mass index werenot statistically significant between isolated myocardial bridge group and myocardial bridge with coronary atherosclerotic plaque group (all P>0.05). The difference in pre?bridge TAG value was statistically significant between the isolated myocardial bridge group and myocardial bridge with coronary atherosclerotic plaque group (all P<0.05), but not statistically significant in post?bridge TAG value and K ratio (all P>0.05). The difference in pre?bridge and post?bridge TAG values and K value was not statistically significant between the superficial group and the deep group (all P>0.05). There was a weak negative correlation (r=-0.205,-0.316,-0.339,respectively,P<0.05) between the plaque volume and pre?bridge&post?bridge TAG values and K ratio. The pre?bridge TAG value significantly affected the plaque formation (P=0.014) and the odds ratio was 0.884 (95% CI 0.801 to 0.976). While other factors had no significant effects on plaque formation (all P>0.05). The area under curveof plaque formation promoted by pre?bridge TAG value was 0.582. When the diagnostic critical value was －37.26 HU/mm, the sensitivity and specificity of pre?bridge TAG value in plaque formation were 31.31% and 81.82%, respectively. Conclusion The TAG value of anterior descending bridge is an independent risk factor for plaque occurrence. The abnormal TAG value of anterior descending myocardial bridge can be detected early by CTA.