Objective To establish an HPLC method for content determination of Ginsengnoside Rg1, Ginsengnoside Rb1 and Notoginsenoside R1 inTianqi Tongjing Capsule.Methods An Agilent ZORBAX SB-C18 column (4.6 mm × 250 mm, 5μm) was used. The mobile phase was composed of acetonitrile (A) and water (B) with gradient elution (0-20 min, 19%→21%A;20-50min, 21%→36%A) at a flow rate of 1.0 mg/mL;the wavelength of detector was 203 nm;the temperature of the column was 25℃.Results The calibration curves of Ginsengnoside Rg1, Ginsengnoside Rb1 and Notoginsenoside R1 showed good linearity within the range of 0.442 4-3.981 6μg (r2=1.000 0), 0.524 8-3.673 6μg (r2=0.999 4) and 0.203 2-1.016μg (r2=0.999 2), respectively. The average recoveries (n=9) were 99.49%, 99.02% and 99.98%, and RSD were 2.44%, 2.45% and 2.14%, respectively.Conclusion The method is simple, reliable, rapid and with good repeatability, and can effectively control the quality ofTianqi Tongjing Capsule.

Journal of Clinical Endocrinology and Metabolism (JCEM), sponsored by U.S. Endocrine Society, is particularly appreciated by clinical endocrine doctors worldwide. It is intimately related to clinical practice while still catching up state of art research methods and recent discoveries and its creativity, novelty, scientific reliability, feasibility and readability are highly appraised. Compared to JCEM, our Chinese Journal of Endocrinology and Metabolism seems to be inadequate in certain aspects and needs to be improved in the future.

This paper focuses on investigating the spectral changes of EEG in overtrained athletes through self-normal controls and thus establishing a digital quantitative approach to recognize the EEGs of overtrained ones. In addition, the VEPs of those with overtraining were analysed.During a period of 11 months, EEGs of each of 20 athletes were recorded separately at their overtrained and normal states. A control group was formed of 19 normal athletes, each of whom two EEG exams were made too. The EEG was taken at rest, during periodic flash stimulation and after hyperventilation (HV). Paired t test was performed on the power spectra of EEGs and VEPs, and Fisher classifier were established by the differences of spectral features (DSF) between the two EEGs in each of almost all of the 30 cases.The relative powers of the EEGs in the overtrained cases showed a significant increase (P

This study aims to construct the plasmid of human Runx1 and observe its possible effects on Runx1 gene expression in human pulmonary adenocarcinoma cells (A549). The shRNA sequence targeting human Runx1 was designed and synthesized, then inserted into pSuper plasmid by DNA recombination technology. The recombinant plasmid was confirmed by bacterial colonies PCR, enzyme digestion analysis and DNA sequencing. A549 cells were transfected by Runx1 shRNA plasmid. The inhibition efficiency of pSuper-Runx1-shRNA plasmid on Runx1 at mRNA level and protein level were measured with real-time PCR and Western blot. The results of real-time PCR and Western blot indicated that the mRNA and protein levels of Runx1 in A549 cells were inhibited by the pSuper-Runx1- shRNA expression plasmid, and the inhibition rate were 33% and 50%, respectively.
Cell Line, Tumor ; Core Binding Factor Alpha 2 Subunit ; genetics ; Gene Expression ; Genetic Vectors ; Humans ; Plasmids ; genetics ; RNA, Messenger ; genetics ; RNA, Small Interfering ; genetics ; Real-Time Polymerase Chain Reaction ; Transfection

Objective By the modern manufacture regulation of original equipment manufacture(OEM),the quality of large scale X-ray equipment is ensured by means of assembling the purchased key components,such as high frequency and high voltage generators and X-TV systems,etc.Methods The technology of Programmable Logic Controller(PLC)was utilized to improve the reliability of X-ray examination table.Results The design of PLC-controlled X-ray examination table was used in the digital X-ray equipment yeas ago.The malfunction probability of mechanic parts was very low,whereas the electric circuit part was almost zero.Conclusion The practice of PLC improves the reliability and control level for X-ray equipment.

Objective To improve X-ray equipment for better medical treatment by digitally transform normal X-ray equipment.Methods Digital image workstation was equipped for digital photography so that ordinary X-ray equipment has the function of a digital X-ray equipment.Results The digital transformation enhance the clinical performance of X-ray equipment.Conclusion It has been proved that some ordinary X-ray equipment can be equipped with digital workstation.

A chiral LC-MS/MS method for the simultaneous analysis of desvenlafaxine (DVS) enantiomers in human plasma was developed and applied to a pharmacokinetic study on 12 Chinese healthy volunteers. d6-Desvenlafaxine was used as internal standard (IS). Chromatographic separation was performed on the Astec Chirobiotic V chiral column (150 mm x 4.6 mm, 5 μm). The assay was linear over the concentration range of 0.500-150 ng x mL(-1) for both enantiomers (r2 > 0.99). The method was successfully applied to a stereoselective pharmacokinetic study of 100 mg desvenlafaxine sustained release tablets on 12 Chinese healthy volunteers under fasting conditions. The results showed that the pharmacokinetic parameters were similar to both enantiomers in Chinese healthy volunteers. The AUC(0-t), and C(max) of the two enantiomers were about 1.5 times higher than those of blacks and whites reported in the literature.

Objective To study on the CDKN2/P16 gene in primary osteosarcoma.Method By using molecular biological methods that inclued genome DNA extraction from paraffined tissue and PCR SSCP analysis technique, we studied alternations of CDKN2/P16 gene in 25 primary osteosarcomas.Results (1)The deletions frequency in differentiation degree of osteosarcomas was① bone brood cell, 16.7% ;② cartilage brood cell,12.5% ;③ Fiber brood cell:20% ,(P >0.05).(2)The deletion frequency in male patients was 17.6% , female patients 12.5% ,(P >0.05).(3)In early metastatic osteosarcomas the deletion rate was 33.3% ,which was significantly higher than that of the control group with the rate of 10.5% (P< 0.05).(4)The deletion rate was 16% and the mutations were not found.Conclusion (1)The deletion rate was 16% and the mutations were not found.This suggests that the deletions of CDKN2/P16 gene were closely related to the genesis of primary osteosarcoma and that the main type of the alternation of CDKN2/P16 gene was deletion.(2)In early metastatic osteosaarcomas the deletion rate was 33.3% , which was significantly higher than that of the control group with the rate of 10.5% .This indicates to great extend that the deletions of CDKN2/P16 gene were closely related to the metastatic ability.(3)The deletions frequency had no significant relationship with differentiation degree of osteosarcomas, so was with the sex of the patient.

OBJECTIVEThis study aims to evaluate the optical data of the different sites of the cobalt-chrome (Co-Cr) alloy abutments covered by four different all-ceramic crowns and the color difference between the crowns and target tab using a digital dental spectrophotometer.

METHODSTen Co-Cr alloy abutments were made and tried in four different groups of all-ceramic crowns, namely, Procera aluminia, Procera zirconia, Lava zirconia (Lava-Zir), and IPS E.max glass-ceramic lithium disilicate-reinforced monolithic. The color data of the cervical, body, and incisal sites of the samples were recorded and analyzed by dental spectrophotometer. The CIE L*, a*, b* values were again measured after veneering. The color difference between the abutments covered by all-ceramic crowns and A2 dentine shade tab was evaluated.

RESULTSThe L* and b* values of the abutments can be increased by all of the four groups of all-ceramic copings, but a* values were decreased in most groups. A statistical difference was observed among four groups. After being veneered, the L* values of all the copings declined slightly, and the values of a*, b* increased significantly. When compared with A2 dentine shade tab, the ΔE of the crowns was below 4.

CONCLUSIONFour ceramic copings were demonstrated to promote the lightness and hue of the alloy abutments effecttively. Though the colorimetric baseline of these copings was uneven, veneer porcelain can efficiently decrease the color difference between the samples and thee target.

Ceramics ; Chromium Alloys ; Cobalt ; Color ; Colorimetry ; Crowns ; Dental Materials ; Dental Porcelain ; Dental Prosthesis Design ; Humans ; Metal Ceramic Alloys ; Titanium ; Zirconium

OBJECTIVEThis study investigates the effect of temporomandibular joint osteoarthritis (TMJOA) on different stages of condylar three-dimensional position and provides a theoretical basis for clinical application.

METHODSThe cone beam computed tomography (CBCT) images of 108 TMJOA patients were analyzed and divided into four stages based on the stage standard of osteoarthrosis X-ray performance proposed by Xuchen Ma in 2005. A total of 28 defect-free temporomandibular joint disorders were used as the control group. Differences in condylar position and condylar axis horizontal angle were evaluated and compared.

RESULTSNo significant differences were found in terms of sagittal relationship, but condylar axis horizontal angle showed a significant difference (F = 3.872, P = 0.005). The horizontal angle values of stage 1 in the TMJOA group were lower than those in stages 2 and 3 (P = 0.027, P = 0.000), whereas the horizontal angle values of stage 2 and control groups were lower than those of stage 3 group (P = 0.004, P = 0.047).

CONCLUSIONCondylar horizontal angle differed in each stage of TMJOA, but no significant difference between the parasagittal positions of the condyles was observed in each stage.

Case-Control Studies ; Cone-Beam Computed Tomography ; Humans ; Mandibular Condyle ; Osteoarthritis ; diagnostic imaging ; Temporomandibular Joint ; diagnostic imaging ; pathology ; Temporomandibular Joint Disorders ; diagnostic imaging