BACKGROUND:Kunming mouse embryonic fibroblasts are the most common feeder layers at present, and there are rare reports addressing C57BL/6 mouse embryonic fibroblasts as feeder layers.
OBJECTIVE:To separate and culture C57BL/6 mouse embryonic fibroblasts in vitro, and produce feeder layers to enlarge the resources of mouse embryonic fibroblasts.
METHODS:C57BL/6 mouse embryonic fibroblasts were isolated and cultured by trypsin digestion method in vitro. The biological characteristics and growth rule of the fibroblasts were investigated, then the feeder layers for the cel culture were produced. The growth of cel colonies on the prepared feeder layer was tested.
RESULTS AND CONCLUSION:C57BL/6 mouse embryonic fibroblasts grew wel with a large amount, by trypsin digestion method at different concentrations. There was no significance in the survival rate after cryopreservation for 1 week, 2 weeks, 1 month, 3 months and 6 months. The cel s were proliferative from the second to fifth passage and declined sharply after the sixth passage. The planted mouse embryonic fibroblasts feeder layers had a high activity within 3 days, but got a sharp decline after 4 days. So it is best to use C57BL/6 mouse embryonic fibroblast feeder layers within 3 days after they’re inactivated. C57BL/6 mouse embryonic fibroblast feeder layer can support embryonic stem cel s and induce pluripotent stem cel s to grow as Kunming mouse embryonic fibroblasts.

Objective To evaluate the changes of cardiac function, cardiac cavity size and hemodynamic after percutaneous balloon mitral valvuloplasty (PBMV) in patients with rheumatic mitral stenosis and small left ventricle Methods PBMV was performed with Inoue technique in 27 patients with rheumatic mitral stenosis and small left ventricle The diameter of balloon was the height (cm) of patient/10+10 mm To measure the changes of hemodynamic during PBMV; to evaluate the cardiac function, size of the left atrium and ventricle, mitral valve area and its mean gradient, maximal pulmonary systolic pressure by echocardiogram 1 week before PBMV and 1 week, 1, 3, 6 month after PBMV Results The left atrial pressure, mean gradient and diastolic murmur decreased; and diastolic pressure of left ventricle increased immediately after PBMV; the cardiac function improved at 1 month after PBMV Conclusion The diameter of balloon can be height (cm) of patient/10+10 mm in the patients with rheumatic mitral stenosis and small left ventricle The cardiac cavity size has significant changes at 1 week and the largest effect was seen at 1 month At 1 month the cardiac function has been improved apparently

Objective:To assess the clinical and microbiologic effects of ultrasonic scaling with simultanous irrigation with chlorhexidine(CHX), conventional ultrasonic scaling or subgingival irrigation. Methods: 20 teeth in 7 patients with periodontitis were equally divided into test and control group. Patients in the test group were treated by irrigation with CHX during ultrasonic scaling(Master400),those in the control with irrigating after scaling(MiNi ). Clinical assessments of bleeding on probing (BOP),probing depth (PD) were made just before and 7 and 14 days after treatment. The subgingival microbiologic examination was performed before and 0,7 and 14 days after treatment. Result: Significant reductions in PD and BOP were observed in both groups 7 and 14 days after treatment(P

The part-time graduate student education is the important part of the graduate student system in Chinese medicine education.Developing and regulating the part-time graduate student education in Chinese medicine is helpful to the consummation of Chinese medicine graduate student system,the cultivation of the high lever talents in Chinese medicine,and keeping up with international graduate student educational system.

Objective To study the effect of the high molecular weight polyethylene on the periprosthetic tissue in diabetic model and investigate the effect of TNF-α in periprosthetic tissue.Methods Induction of experimental diabetes in rabbit with streptozotocin was performed successfully,every rabbit's lower limb was implanted a kirschner wire plug in femur by intereondylar notch.In experimental group,15 mg polyethylene particles,dispersed in 1.5 ml normal saline solution,were injected into one knee joint.The other knee joint was injected 1.5 ml normal saline solution ag control.This procedure was repeated for 2,4,6,8,10,and 12 weeks after the implantation.All animals were killed on the 2nd week after the last injection.Knee joint capsule tissues and periprosthetie tissues were examined by optical microscope.ELISA was used for determing the concentration of TNF-α.Results The results showed that kirschner wire were surrounded by multinueleated foreign-body giant cells and osteoclagt in the experimental group.Synovial membrane proliferation was obvious in the control group.There were no polyethylene particles and multinucleated foreign-body giant cells around plug in the marrpw.New bone wag found,kitschner wire was surrounded by suosteoblast,and normal synovial membrane was appeared.The concentration of TNF-α in experimental group was higher than that in control group.Conclusion Maximal ultra high molecular weight polyethylene and diabetic mellitus can restrain diabetic rabbit pefiprosthetic bone formation and increase the secretion of TNF-α.which may play an important role in the periprosthetic osteolysis.

Objective:To investigate the expression of MMP-1 and MMP-8 in periodontal tissues in rats with periodontitis at different stages of inflammation with varied severity. Methods:Periodontitis was induced by silk ligature. P.gingivalis(Pg) or Pg with F.nu were used to induce the varied severity of periodontitis in 40 rats. 14 and 28 days after periodontitis induction the animals were sacrificed, periodontal tissues were immunohistochemically stained by antibody of MMP-1 and MMP-8 respectively. Results:MMP-1 and MMP-8 were both strongly positive in gingival epithelia cells and fibroblasts in periodontal ligament in rats with periodontitis.Higher expression of MMP-1 and MMP-8 was observed at 14 d than at 28 d(P0.05). Conclusion:The expression of MMP-1 and MMP-8 varies in different stage of periodontitis. MMP-1 and MMP-8 may play an important role in development of periodontitis.

Objective:To compare the compressive strength of porcelain crown with Co-Cr,CAD/CAMpure titanium and CAD/CAM zirconia respectively.Methods:Metal models of simulating crown core of the ideal premolar were manufactured,digital data of the met-al model were obtained by CAD/CAMsystem,the basement crowns of Co-Cr,CAD/CAMpure titanium and CAD/CAMzirconia were respectively made(n =5),size of each crown was kept the same and the spcimens were set as group A,B and C respectively.Then masking porcelain and body porcelain were fired on basement crowns according to the instructions.The thickness of the porcelain was kept the same.All of the porcelain crowns were located on the Instron testing machine,the compression strength force values were measured.Data were statistically analysed by SPSS 1 3.0 software.The bonding surface of basement material and porcelain was observed by SEMafter compressive failure.Results:The compressive strength(N)of group A,B and C was 2 990 ±1 88,2 305 ±1 57,2 1 50 ± 1 31 ,A vs B or C,P <0.05,B vs C,P >0.05.Conclusion:All the 3 base materials with porcelain crown satisfy the clinical require-ments.The compressive strength of Co-Cr porcelain crown is stronger than that of CAD/CAMpure titanium porcelain crown and CAD/CAMzirconia porcelain crown.

Objective To maintain the good psychological state of new nurses, stabilize nursing troop and improve nursing quality, we investigate the work pressure source and mental health of new nurses and analyze the correlation among work pressure, mental resilience and mental health. Methods According to the principle of convenience sampling,a total of 116 new nurses who get the job less than one year in the first hospital of Jilin university were investigated using the method of questionnaire survey. The Conner Davidson Resilience Scale (CD-RISC), Self-rating Anxiety Scale (SAS) and Self-rating Depression Scale (SDS) were involved in the questionnaire. Results Mental resilience scores of new nurses were (63.73±15.11), the scores of anxiety and depression were (34.49±6.45) and (35.59±7.24). Work pressure was negatively correlated with mental resilience (P<0.01) and positively correlated with anxiety and depression (P<0.01). New nurses worried about making mistakes in the work accounted for 89.42 percents (93/104), which was the highest score in the stress source. Conclusions New nurses have good mental resilience and psychological health level, but work pressure has certain impact on mental resilience and mental health. Hospital managers should take active measures which include reducing pressure and improving the ability to help the new nurses through the adaptation as soon as possible.

Objective To summarize the imaging features of intra-pancreatic accessory spleen (IPAS)with multidetector computed tomography (MDCT) and improve the awareness and correct diagnosis of IPAS.Methods MDCT images of seven consecutive patients with surgically and pathologically confirmed IPAS were reviewed retrospectively.The investigated features included the location,size,shape,margin,density,and enhancement of the lesions.Results Four patients were male and three were female with a mean age of 49 years old.All the lesions were located at the dorsal side of parenchyma under the capsule of pancreatic tail.Three lesions were in round-like shape,and 4 in oval shape and all were well-defined.All the lesions were mass-like without necrosis and calcification.The maximum diameter of lesion ranged from 0.9 ～ 1.8 cm with a mean value of 1.4 cm.Compared with pancreatic parenchyma,the density of lesions were homogeneous on unenhanced CT,in arterial phase,slightly increased heterogeneous density was observed in 3 patients,slightly increased homogeneous density was observed in 4 patients.All the lesions appeared as slightly increased homogeneous density in portal phase.The CT value in unenhanced phase ranged from 50 ～ 61 Hu with a mean number of 55 Hu; and it ranged from 80 ～ 110 Hu with a mean number of 97 Hu in arterial phase; and the corresponding value was from 99 ～ 120 Hu with a mean number of 102 Hu in portal phase.Among the three patients underwent MDCT angiography,neither artery nor vein was compressed or invaded,and there was no vessel connected with lesions.Conclusions IPAS has some MDCT characteristics.For small solid mass in pancreatic tail,if the density and enhancement pattern is similar to that of spleen,the diagnosis of IPAS should be considered.

Objective To investigate the influence of calcitonin on bone mineral density and biomechanics around the artificial pros-thesis in ovariectomized diabetic rabbit model. Methods Fourteen femina New Zealand white rabbits at the age of 5 months old were select-ed, which weight 2.24 -2.65kg, averaging 2.26kg. First, the model of rabbit with diabetic osteoporosis was successfully established by the compound method of ovariectomy plus streptozotocin. Osteotomy in the middle part of femur was performed in both groups, fixation of artifi-cial prosthesis was done with 3.0 kirschner wire. After that, Rabbit models with diabetic osteoporosis were randomly divided into experimen-tal group and control group. Rabbits in the experimental group were treated with calcitonin 6U intramuscular injection once every other day. In control group, intramuscular injection of normal saline solution 1.5ml once every three days. Rabbit models of two groups were sacrificed in the 24th week. The BMD of the region of interest (ROI) around the prosthesis were detected before experiment and 8, 16 and 24 weeks after injection. After rabbits were killed, experimental femurs in both groups were complete removal and soft tissues were rejected. Determi-nation of the pull-out and torsion bone biomechanics experiments of prosthesis was done in both groups respectively. Results The BMD of ROI in the experimental group before operation was (0.1863±0.004)g/cm2 and (0.1753±0.005)g/cm2 in 24 weeks after operation, in control group before operation was (0.1865±0.002)g/cm2 and (0.1638±0.005)g/cm2 in 24 weeks after operation. There were significant difference between the two groups(P < 0.05). Biomechanical show that the pull-out strength in the experimental group was (312.68±8.73 )N/cm2 and (205.43±12.45 ) N/cm2 in control group. There were significant difference between the two groups(P < 0.05). The tor-sion strength in experimental group was (80.47±2.51) N/cm2 and (38.52±0.64) N/cm2 in control group. There were significant differ-ence between the two groups(P < 0.05). Conclusion Salmon calcitonin can reduce the bone turnover rate around prosthesis and decrease bone absorption in the rabbit of diabetic osteoporosis models, accelerate the bone formation around prosthesis, and increase the BMD. It can ameliorate the quality of bone around prosthesis, improve its biomechanics property, and increase the holding power between prosthesis and body mass. It is of clinical significance for the prevention and treatment of aseptic loosening artificial prosthesis.