Objective To investigate the correlation between histone deacetylase 1(HDAC1) and vascular endothelial growth factor(VEGF) in the patients with lung adenocarcinoma.Methods Eighty cases of lung adenocarcinoma in our hospital from August 2014 to April 2016 served as the research subjects,and contemporaneous 80 individuals undergoing healthy physical examination were taken as the control group.The fasting venous blood sample was collected in all subjects.Then serum HDAC1 and VEGF levels were detected by ELISA.The differences of serum HDAC1 and VEGF expression levels were compared between the two groups.The HDAC1 and VEGF expression levels in the patients with different characteristics of lung adenocarcinoma and the relation between serum HDAC1 and VEGF concentrations were analyzed.Furthermore the possible influence factors of HDAC1 protein expression level in the patients with lung adenocarcinoma were analyzed.Results The HDAC1 levels in the control group and observation group were(329.56 ± 23.83) ng/L and(568.20 ± 35.40) ng/L,the difference was statistically significant(t=23.576,P=0.000).The VEGF levels in the control group and observation group were(40.26±9.82)ng/L and(296.56±19.80)ng/L respec tively,the difference was statistically significant(t=31.154,P=0.000).The HDAC1 protein level had statistical difference among different genders,ages,clinical stages and smoking history,the HDAC1 protein level in male,age ＞60 years old,clinical stage Ⅲ,V and patients with smoking history were higher(P＜0.05).The Pearson correlation analysis results showed that serum HDAC1 in the patients with lung adenocarcinoma was positively correlated with VEGF protein concentration(r=0.526,P =0.000).The Logistic regression analysis showed that influence factor of HDAC1 protein expression level in the patients with lung adenocarcinoma was clinical stage.Conclusion The high expression of HDAC1 protein in lung adenocarcinoma patients may also simultaneously regulate the VEGF expression,thus promotes the development of lung adenocarcinoma.

BACKGROUND: Osteosarcoma is the most common type of bone tumor and generally occurs between the age of 10 to 25; moreover, in clinical practice osteosarcoma is found to occur more often in minority nationalities in Xinjiang Autonomous Region. Do its incidence and prognosis vary between nationalities at gene levelOBJECTIVE: To observe the different expressions of p53, bcl-2 and proliferative cell nucleus antigen (PCNA) gene during the development of osteosarcoma between various Xinjiang nationalities.DESIGN: Non-randomized comparative experiment taking clinical pathological specimens as subjects.SETTING: Immunohistochemical Laboratory, the Pathological Center of Xinjiang Medical University.PARTICIPANTS: Totally 52 pieces of specimen were obtained from excised osteosarcoma tissues in the Pathological Department, the First Affiliated Hospital of Xinjiang Medical University, and the Pathological Department, the First Affiliated Hospital of Shihezi University, between January 1,1984 and December 31, 2001. The 52 cases of osteosarcoma included 29cases derived from male patients and 23 from female patients; among them there were 12 cases of Kazak minority, 17 cases of Uygur minority and 23cases of Han nationality. Other 32 specimens were obtained from 32 patients with tumor-like lesions (such as osteofibrous dysplasia or fibrous dysplasia), including 7 cases of Kazak minority, 11 cases of Uygur minority,and 14 cases of Han nationality. The informed consent was obtained from the patients.METHODS: This experiment was carried out at the Immunohistochemical Laboratory, the Pathological Center of Xinjiang Medical University. LSAB method was used to detect p53, bcl-2 and PCNA expression in the two groups. The first antibody was re placed by PBS as blank control, and the available positive expression was taken as positive control. P53 protein and PCNA were observed to express in cell nucleus, appearing obvious redbrown granules with positive expression, whereas Bcl-2 protein was expressed in cytoplasm.lationship between the expression of Bcl-2, p53 and PCNA in osteosarcoma.of different nationalities: The expression of p53, bcl-2 and PCNA in Kazak minority, Uygur minority and Han nationality was not remarkable p53, bcl-2 and PCNA in osteosarcoma and bone tumor-like lesions: The expression of P53, Bcl-2 protein and PCNA in osteosarcoma was remarkably higher than that in tumor-like lesions (42.31% vs. 3.13 %, 59.62%sion of bcl-2, p53 and PCNA in osteosarcoma: There was a close correlation between bcl-2 and p53, as well as between bcl-2 and PCNA in osteosarcoma tissues (X2 =5.818 2, 4.900 0, P＜0.05).CONCLUSION: The results indicate that there was no statistical difference between various nationalities in the expression of p53, bcl-2 and PCNA, as well as osteosarcoma differentiation. Suggesting that these genes may share the common regulation during the development of osteosarcoma,which is less associated with their nationality-related hereditary background.

Objective To establish chronic coronary stenosis model for fractional flow reserve derived from coronary CT angiography (FFRcT) in Bama miniature pig,and to evaluate its reliability.Methods Sixteen Bama miniature pigs were used to establish chronic coronary stenosis models through placing Ameroid constrictor into proximal or middle segments of left anterior descending arteries (LAD).In the 2nd week after modeling,the degrees of stenosis were monitored with coronary CTA.Invasive coronary angiography was used to verify stenosis degrees and measure fractional flow reserve (FFR) within 2 days of last coronary CTA examination.Computational fluid dynamics model was constructed and FFRcT was calculated by the specialized laboratory based on coronary CTA data respectively.Simulated FFRcT and FFR values were compared to verify this model.Results Models were successfully established in 10 pigs with a total of 24 coronary CT examinations,of which image quality met the diagnostic requirements.All models were with LAD stenosis＜25 ％ in the 2nd week after operation.LAD stenosis ＞50％ was found in the 3rd week in 9 pigs,and the other one was found with LAD stenosis ＞50％ in the 4th week.The results of coronary CTA corresponded to those of coronary angiography.There was no significant difference between simulated FFRcT and FFR value (t =-1.13,P =0.29).Conclusion Through placing Ameroid constrictor into LAD of Bama miniature pig and monitoring the degree of stenosis with coronary CTA,model of chronic coronary stenosis could be successfully established,which are suitable for noninvasive simulating hemodynamics study based on coronary CTA.

Objective: To investigate the expression of lncRNA01296 in esophageal cancer (EC) tissues and its effect on the proliferation and migration of EC TE-2 cells. Methods:Atotal of 36 pairs of esophageal cancer tissues and corresponding para-cancerous tissues were collected from EC patients admitted to the Department of Thoracic Surgery,Affiliated Hospital of Chengde Medical College from January 2017 to September 2018. The human normal esophageal epithelial (HEEC) cells and human esophageal cancer cell lines ECA109, TE-1 and TE-2 were cultured. qPCR was used to detect the mRNAexpressions of lincRNA01296, SNRPA(small nuclear ribonucleoproteinA) and NGF (nerve growth factor) in EC tissues and cells. Recombinant lentiviral interference vectoror control vector were used to transfect EC cell lines, as sh-lncRNA01296#1,#2 and Mock groups. WB was used to detect the protein expressions of SNRPAand NGF in transfected cells. MTS assay was used to detect cell proliferation, and Transwell assays were used to detect cell invasion and migration of TE-2 cells after transfection. Results: The mRNAexpressions of lncRNA01296, SNRPAand NGF were significantly increased in esophageal cancer tissues and cell lines (all P<0.01), and these expressions in poorly differentiated TE-2 cells were higher than those in highly differentiated ECA109 and TE-1 cells (all P<0.05). The mRNAexpressions of lncRNA01296 and NGF in sh-lncRNA01296#1 and sh-lncRNA01296#2 groups were significantly lower than those in Mock group (all P<0.01), while the mRNAexpression of SNRPAshowed no statistical difference among three groups (P>0.05). The protein expressions of lncRNA01296 and NGF in sh-lncRNA01296#1 and sh-lncRNA01296#2 groups were significantly lower than those in Mock group (all P<0.01). The relative proliferation ability of cells in sh-lncRNA01296#1 and shlncRNA01296#2 groups was significantly lower than that of Mock group at 48 and 72 h after transfection (P<0.05 or P<0.01). The number of invasive cells was (72.0±6.3), (36.6±4.3) and (33.9±3.7) in Mock, sh-lncRNA01296#1 and sh-lncRNA01296#2 groups, respectively; and the number of migrated cells was (85.2±9.9), (47.5±8.1) and (43.8±6.5), respectively, indicating that the numbers of invasive and migrated cells in sh-lncRNA01296#1 and sh-lncRNA01296#2 groups were significantly less than those in Mock group(all P<0.01). Conclusion: lncRNA01296 can up-regulate SNRPAexpression to promote NGF-mediated proliferation and metastasis of EC cells, which may provide new target for the diagnosis and treatment of esophagealcancer.

The current finite element analysis of vascular stent expansion does not take into account the effect of the stent release pose on the expansion results. In this study, stent and vessel model were established by Pro/E. Five kinds of finite element assembly models were constructed by ABAQUS, including 0 degree without eccentricity model, 3 degree without eccentricity model, 5 degree without eccentricity model, 0 degree axial eccentricity model and 0 degree radial eccentricity model. These models were divided into two groups of experiments for numerical simulation with respect to angle and eccentricity. The mechanical parameters such as foreshortening rate, radial recoil rate and dog boning rate were calculated. The influence of angle and eccentricity on the numerical simulation was obtained by comparative analysis. Calculation results showed that the residual stenosis rates were 38.3%, 38.4%, 38.4%, 35.7% and 38.2% respectively for the 5 models. The results indicate that the pose has less effect on the numerical simulation results so that it can be neglected when the accuracy of the result is not highly required, and the basic model as 0 degree without eccentricity model is feasible for numerical simulation.

Valve transplantation is often used in the treatment of aortic valve insufficiency. However, after surgery, the reconstructed aortic roots have an expansion phenomenon, in which the lack of valve height causes the aortic valve to close again. In this paper, the effects of different aortic valve height design on valve opening and closing performance were studied. The optimal surgical plan was obtained by numerical simulation, providing technical support and theoretical basis. In this paper, six groups of three-dimensional geometric models with a valve height increment of ± 0.5 mm were established with a root diameter of 26.0 mm and a valve height of 14.0 mm. Through the structural mechanics calculation and analysis of the parameters such as maximum stress, valve area and contact force of the model, reasonable geometrical dimensions are obtained. The study found that the maximum stress values of the six groups of models ranged from 640 to 690 kPa, which was consistent with the results of the literature; the three-group models with valve heights of 13.5 mm, 14.0 mm, and 14.5 mm were within a reasonable range. The contact force value of the 6 groups of leaflets increased with the increase of valve height. Studies have shown that the height of the aortic valve has an effect on the aortic valve closure performance. A valve height that is too small or too large will reduce the aortic systolic valve area and affect the aortic function.
Aortic Valve ; physiology ; surgery ; Aortic Valve Insufficiency ; surgery ; Heart Valve Prosthesis ; Humans ; Models, Cardiovascular

To solve the problem of stent malapposition of intravascular stents, explore the design method of intravascular body-fitted stent structure and to establish an objective apposition evaluation method, the support and apposition performance of body-fitted stent in the stenotic vessels with different degrees of calcified plaque were simulated and analyzed. The traditional tube-mesh-like stent model was constructed by using computational aided design tool SolidWorks, and based on this model, the body-fitted stent model was designed by means of projection algorithm. Abaqus was used to simulate the crimping-expansion-recoil process of the two stents in the stenotic vessel with incompletely calcified plaque and completely calcified plaque respectively. A comprehensive method for apposition evaluation was proposed considering three aspects such as separation distance, fraction of non-contact area and residual volume. Compared with the traditional stent, the separation distances of the body-fitted stent in the incompletely calcified plaque model and the completely calcified plaque model were decreased by 21.5% and 22.0% respectively, the fractions of non-contact areas were decreased by 11.3% and 11.1% respectively, and the residual volumes were decreased by 93.1% and 92.5% respectively. The body-fitted stent improved the apposition performance and was effective in both incompletely and completely calcified plaque models. The established apposition performance evaluation method of stent considered more geometric factors, and the results were more comprehensive and objective.
Constriction, Pathologic/surgery* ; Humans ; Plaque, Atherosclerotic ; Stents

Based on the noninvasive detection indeices and fuzzy mathematics method, this paper studied the noninvasive, convenient and economical cardiovascular health assessment system. The health evaluation index of cardiovascular function was built based on the internationally recognized risk factors of cardiovascular disease and the noninvasive detection index. The weight of 12 indexes was completed by the analytic hierarchy process, and the consistency test was passed. The membership function, evaluation matrix and evaluation model were built by fuzzy mathematics. The introducted methods enhanced the scientificity of the evaluation system. Through the Kappa consistency test, McNemer statistical results ( = 0.995 > 0.05) and Kappa values (Kappa = 0.616, < 0.001) suggest that the comprehensive evaluation results of model in this paper are relatively consistent with the clinical, which is of certain scientific significance for the early detection of cardiovascular diseases.
Cardiovascular Diseases ; diagnosis ; Cardiovascular System ; Fuzzy Logic ; Humans ; Models, Cardiovascular ; Research

ObjectiveT o explore the influence of patch shape for intraventricular tunnel (IVT) construction on biomechanical performance of the double outlet right ventricle after correction. Methods Based on the idealized IVT model, a two-dimensional IVT patch was designed. Six groups of patch models with the rhombic long-to-short axis ratio of 1∶0.625, 1∶0.3, 1∶0.2, 1∶0.15, 1∶0.125, 1∶0.1 were established according to the difference between the long and short axis of the rhombus patch in the turning part, and finite element analysis method was used to numerically simulate the process of stitching, holding and propping up the patch into a three-dimensional (3D) IVT model. Results The maximum stresses on suture line of 6 patch models were mainly concentrated at acute-angle corners of the rhombus. As rhombic long-to-short axis ratio of the patch increased, the maximum stress of the IVT suture line first decreased and then increased, and the volume showed an increasing trend. The pressure difference between two ends of the tunnel first decreased and then increased. The patch with the long-to-short axis ratio of 1∶0.15 had a uniform surface stress distribution, and the maximum stress on the suture line was the smallest. Meanwhile the right ventricular volume was less encroached on, and the pressure difference at both ends of the tunnel was small. Conclusions The IVT shape can influence stresses of suture line, the right ventricle volume and the pressure difference of IVT with non-monotonic variations. The suture effect of the patch with the long-to-short axis ratio of 1∶0.15 is relatively better among the constructed models.

Objective To explore the biomechanical mechanism of aortic insufficiency (AI) after single aortic valve replacement (SAVR) in children and propose the corresponding countermeasures. Methods The idealized aortic valve model and postoperative growth model were constructed. By changing the length of leaflet free edge, leaflet height as well as improving the design with a concave structure, the effects of different structure dimensions on movement synchronization and closing performance of the aortic valve after surgery were compared. Results The closure of the replacement leaflet lagged behind the autologous leaflet, which fitted 2 mm below free edge of the replacement leaflet. AI occurred 6 years after operation. Increasing leaflet height could not improve the postoperative effect and would increase the maximum stress of the leaflet. Increasing free edge length by 10% could improve the postoperative outcomes, while increasing free edge length by 15% would cause the leaflet to be too long, hence resulting in a poor fit of the aortic valve. Compared with the traditional structure, the concave structure was more beneficial for closing performance of the aortic valve, and it could effectively reduce the maximum stress by 20% with the best effect. Conclusions The leaflet movement will be out of synchronization after SAVR, the point of convergence will be shifted, and AI will appear 6 years after surgery. It is recommended to use a concave structure with free edge length increased by 10%, while increasing leaflet height is not recommended.