Bone-anchored hearing aid is a hearing assisting technology that raise the hearing level via bone conduct and is also the only implantable hearing assisting device working by bone conduct. Because of the superior performance and simple process of implantation, it brings gospel to the patients who are not fitting the air conducting hearing devices. This article is a review of bone-anchored hearing aid from 6 aspects, including history, principle, indication, consulting, surgery and complication.
Hearing Aids ; Humans ; Suture Anchors

PURPOSE: For an isolated tear of the subscapularis tendon, the presented technique using a subclavian portal provides both a good angle for anchor placement and sufficient space for managing the upper portion of a subscapularis tendon tear. MATERIALS AND METHODS: The conventional method needs 2 additional portals for traction, debriding the footprint and anchor fixation for repair. The presented technique requires only an anterior portal for suture management and a subclavian portal without cannula for suture anchoring and placement of suture hooks. RESULTS: The two suture limbs of the anchor can be placed on the subscapularis tendon by the switching technique and these limbs are repaired sequentially. CONCLUSION: This technique is simple and reproducible and it can be applied to partial tears and minimally retracted subscapularis tears.
Catheters ; Extremities ; Suture Anchors ; Sutures ; Tendons ; Traction

Medial meniscal root tears have been repaired using various methods. Arthroscopic all-inside repair using a suture anchor is one of the popular methods. However, insertion of the suture anchor into the proper position at the posterior root of the medial meniscus is technically difficult. Some methods have been reported to facilitate suture anchor insertion through a high posteromedial portal, a posterior trans-septal portal, or a medial quadriceptal portal. Nevertheless, many surgeons still have difficulty during anchor insertion. We introduce a technical tip for easy suture anchor insertion using a 25° curved guide and a soft suture anchor through a routine posteromedial portal.
Menisci, Tibial ; Surgeons ; Suture Anchors* ; Sutures* ; Tears

Ankle sprain secondarily leads to chronic lateral ankle instability in 20%-30% of cases. Many surgical procedures have been presented for lateral ankle instability; however, controversy remains regarding the ideal surgical option. The Brostrom procedure or its modifications have been widely used; however, they have some limitations for the instabilities of over-weight, physically high demanding patients, generalized ligamentous laxity, and especially for significantly deficient or attenuated ligaments. This article reports on the difference between the bone tunnel technique and the suture anchor technique of the modified Brostrom procedure, and also provides a review of several recent debates.
Ankle Injuries ; Ankle* ; Humans ; Ligaments ; Suture Anchors

PURPOSE: The purpose of our study was to perform a comparison of the outcomes of the modified Brostrom procedure using only a suture anchor compared with using a suture anchor with a pushlock anchor. MATERIALS AND METHODS: This was a retrospective study of chronic lateral ankle instability that underwent a modified Brostrom procedure using a bioabsorbable suture anchor & a pushlock anchor, performed by a single surgeon. A total of 88 patients were enrolled in the study. The function of the patient's ankles were scored using the American Orthopaedic Foot and Ankle Society (AOFAS), visual analogue scale (VAS) both preoperatively and postoperatively. RESULTS: The difference in the overall means between the group A and group B was not statistically significant. But, the patient's satisfaction was better in the group B, and there were more complications in the group A. CONCLUSION: The technique presented here uses the modified Brostrom procedure with pushlock anchors to prevent the problems associated with subcutaneous knot irritation.
Animals ; Ankle ; Foot ; Humans ; Retrospective Studies ; Suture Anchors ; Sutures

PURPOSE: This study examined the outcomes of reconstruction of the coracoclavicular ligaments with using two suture anchors and performing coracoacromial ligament transfer in patients with acromioclavicular dislocation. MATERIAL AND METHODS: Forty patients with complete acromioclavicular dislocation were included in this study. According to the preoperative radiographs, 5 patients with AC dislocations were diagnosed as type III, 4 patients as type IV and 31 patients as type V. Two 3.5mm suture anchors with four strands of nonabsorbable sutures were separately placed on the anterolateral and posteromedial portion of the base of the coracoid process to stabilize the distal clavicle. The coracoacromial ligament was then transferred to the undersurface of the distal end of the clavicle for augmentation. RESULTS: At a mean follow-up of 28 months, the average Constant score improved to 97 points. All the patients returned to normal life at an average of 3.2 months postoperatively. At the last follow-up, 37 patients achieved anatomical reduction and three patients showed complete redislocation. However, the clinical results of the patients with redislocation were satisfactory. CONCLUSION: Anatomical coracoclavicular reconstruction using two suture anchors and coracoacromial ligament transfer for treating complete acromioclavicular dislocation is a safe, effective procedure for restoring a physiologically stable acromioclavicular joint.
Clavicle ; Dislocations ; Follow-Up Studies ; Humans ; Ligaments ; Suture Anchors ; Sutures

The arthroscopic rotator cuff repair is now considered a mainstream technique with highly satisfactory clinical results. However, concerns remain regarding healing failures for large and massive tears and high revision rate. In recent decades, various repair strategies and construct configurations have been developed for rotator cuff repair with the understanding that many factors contribute to the structural integrity of the repaired construct. The focus of biomechanical test in arthroscopic repair has been on increasing fixation strength and restoration of the footprint contact characteristics to provide early rehabilitation and improve healing. These include repaired rotator cuff tendon-footprint motion, increased tendon-footprint contact area and pressure, and tissue quality of tendon and bone. Recent studies have shown that a transosseous tunnel technique provides improved contact area and pressure between rotator cuff tendon and insertion footprint, and the technique of using double rows of suture anchors to recreate the native footprint attachment has been recently described. The transosseous equivalent suture bridge technique has the highest contact pressure and fixation force. In this review, the biomechanical tests about repair techniques of rotator cuff tear will be reviewed and discussed.
Rehabilitation ; Rotator Cuff* ; Suture Anchors ; Sutures ; Tears* ; Tendons

BACKGROUNDFor partial-thickness tears of the rotator cuff, double-row fixation and transtendon single-row fixation restore insertion site anatomy, with excellent results. We compared the biomechanical properties of double-row and transtendon single-row suture anchor techniques for repair of grade III partial articular-sided rotator cuff tears.

METHODSIn 10 matched pairs of fresh-frozen sheep shoulders, the infraspinatus tendon from 1 shoulder was repaired with a double-row suture anchor technique. This comprised placement of 2 medial anchors with horizontal mattress sutures at an angle of ≤ 45° into the medial margin of the infraspinatus footprint, just lateral to the articular surface, and 2 lateral anchors with horizontal mattress sutures. Standardized, 50% partial, articular-sided infraspinatus lesions were created in the contralateral shoulder. The infraspinatus tendon from the contralateral shoulder was repaired using two anchors with transtendon single-row mattress sutures. Each specimen underwent cyclic loading from 10 to 100 N for 50 cycles, followed by tensile testing to failure. Gap formation and strain over the footprint area were measured using a motion capture system; stiffness and failure load were determined from testing data.

RESULTSGap formation for the transtendon single-row repair was significantly smaller (P < 0.05) when compared with the double-row repair for the first cycle ((1.74 ± 0.38) mm vs. (2.86 ± 0.46) mm, respectively) and the last cycle ((3.77 ± 0.45) mm vs. (5.89 ± 0.61) mm, respectively). The strain over the footprint area for the transtendon single-row repair was significantly smaller (P < 0.05) when compared with the double-row repair. Also, it had a higher mean ultimate tensile load and stiffness.

CONCLUSIONSFor grade III partial articular-sided rotator cuff tears, transtendon single-row fixation exhibited superior biomechanical properties when compared with double-row fixation.

PURPOSE: To evaluate the result of arthroscopic modified Brostrom procedure with suture anchor for chronic lateral ankle instability. MATERIALS AND METHODS: Fifty-two patients with chronic lateral ankle instability were analyzed, who underwent arthroscopic modified Brostrom procedure between December 2010 and May 2012. Clinical evaluation was performed using AOFAS scroring and Sefton grading system. RESULTS: The average AOFAS hind foot score increased from preoperative 61.9 to 88.8 at the last follow up. There were 35 excellent, 9 good, 4 fair, 4 poor results according to Sefton grading system. For one patient, lateral ankle instability recurred. CONCLUSION: Arthroscopic modified Brostrom procedure is considered to be an effective and satisfactory technique.
Ankle* ; Arthroscopy ; Follow-Up Studies ; Foot ; Humans ; Suture Anchors

The purpose of this study was pertinent design of the framework of the fixed bone anchored bridge using implants in the edentulous mandible through analysis of stress distribution by the three dimensional finite element analysis method. The results were as follows: 1. The L-shaped framework was favorable in restoring the edentulous mandible by implants and fixed bone anchored bridge. 2. The structure of the framework should be designed to endure the occlusal load because of stress concentration at the most distal abutment of the framework. 3. The stress at the distal implant where cantilever starts was twice as much as that of other portions. 4. Compressive stress was generated on the framework of the mesial side of the distal implant and extrusive force was induced to the mesially positioned implants. 5. The height of vertical plate was high as possible as can be to distribute stresses concentrating bucco-lingually and labio-lingually in the framework between abutments, 6. Reinforcement of the horizontal plate thickness was needed because stress was loaded more on the horizontal plate than on the vertical plate of the framework. 7. Lengthening of the vertical plate can compensate for any limitations in horizontal plate width.
Dental Implants* ; Finite Element Analysis ; Mandible ; Suture Anchors*