In order to investigate working conditions of underground coal mines, this work was undertaken to evaluate the respirable dust and the concentration of quartz in Taeback and Kangneung areas. The concentration of quartz was determined by Fourier Transform Infrared Spectrophotometry. The results were as follows; 1) The concentration of respirable dust of drilling and coal face in Taeback and Kangneung areas were as followed. 2) Distribution of respirable dust was well fitted to the long-normal distribution and geometric mean value was log(-1) 0.37+/-log(-1) 0.47 (2.34+/-2.95) mg/m3. 3) The difference of respirable dust concentrations in Taeback and Kangneung areas was not significant statistically (p>0.05). 4) The concentration of quartz of drilling and coal face in Taeback and Kangneung areas were as followed. 5) Distribution of quartz concentrations was well fitted to the log-normal distribution and geometric mean value was log(-1) 0.33+/-log(-1) 0.45 (2.14+/-2.82)%. 6) The difference of quartz concentrations in Taeback and Kangneung areas was not significant (p>0.05), but significant at drilling sites and coal faces (p<0.05).
Coal* ; Dust* ; Fourier Analysis ; Gangwon-do* ; Quartz* ; Spectrophotometry, Infrared

Mid-infrared (MIR) spectroscopy is applicable to blood glucose sensing without using any reagent, however, due to a result of inadequate accuracy, till now this method has not been used in clinical detection. The principle and key technologies of blood glucose sensing by MIR spectroscopy are presented in this paper. Along with our experimental results, the paper analyzes ways to enhance measurement accuracy and prediction accuracy by the following four methods: selection of optimized spectral region; application of spectra data processing method; elimination of the interference with other components in the blood, and promotion in system hardware. According to these four improving methods, we designed four experiments, i.e., strict determination of the region where glucose concentration changes most sensitively in MIR, application of genetic algorithm for wavelength selection, normalization of spectra for the purpose of enhancing measuring reproduction, and utilization of CO2 laser as light source. The results show that the measurement accuracy of blood glucose concentration is enhanced almost to a clinical detection level.
Blood Glucose ; analysis ; Humans ; Hyperglycemia ; blood ; Spectrophotometry, Infrared ; methods

OBJECTIVETo establish a rapid determination method of pinoresinol diglucoside in Eucommiae unloads by near-infrared reflectance spectroscopy (NIRS).

METHODForty-one samples of E. unloads were collected from three different producing areas and their main component, namely pinoresinol diglucoside, was determined by HPLC. Corresponding data of samples were collected from 12 000 to 4 000 cm(-1) by near-infrared reflectance spectroscopy. The spectral pretreatment was optimized by OPUS software and the calibration equations between the content of pinoresinol diglucoside and spectrum data were constructed by partial least squares regression.

RESULTAvailable information could be extracted from spectra in the range from 7 502 to 4 597.6 cm(-1) after corrected by applying second derivative transformation and subtract a linear correction. Cross validation was used to prevent over-fitting. Good correlation existed between pinoresinol diglucoside content and NIR spectra ( R2 = 0.926 4, SEC = 0.029 and SEP = 0.066 2).

CONCLUSIONNIRS calibration equations developed in this study could be applied to the rapid analysis of the pinoresinol diglucoside content.

PURPOSE: Hepatolithiasis is a recurrent disease and common in Far East Asia. In Korea, almost all intrahepatic duct (IHD) stones were pigment stones 30~40 years ago. The nationwide cooperative study showed a higher cholesterol content of IHD stones compared to the previous data. Some reports have shown a close relationship between urbanization and the cholesterol content of stones. The purpose of this study was to evaluate the cholesterol content of IHD stones in the West Gyeongnam region and evaluate the associated clinical and demographic variables. METHODS: The IHD stones were removed surgically from twenty patients who had hepatolithiasis between July 2005 and April 2007. The stones were grouped by their gross findings. The cholesterol contents were measured quantitatively by infrared spectrophotometry and compared with the clinical variables. RESULTS: Among twenty patients, 19 had pigment stones and only one had gross evidence of a cholesterol stone. The cholesterol content of the stones were 30%~50% in 13 patients, 50~70% in 6 patients and over 70% in one patient. In urban patients, the cholesterol contents of the IHD stones were higher (567.029 mg/g) than in rural patients (421.822 mg/g)(p<0.05). All stones in rural patients were pigment stones; the stones of urban patients consisted of 5 pigment, 6 mixed and 1 cholesterol stone (p<0.05). CONCLUSION: The mean cholesterol content of the IHD stones was 508.946 mg/g; the content of the stone was significantly related to the residence of the patients. These results suggest that the cholesterol content of IHD stones are likely to increase in West Gyeongnam as urbanization increases.
Asia ; Cholesterol* ; Far East ; Humans ; Korea ; Spectrophotometry, Infrared ; Urbanization

A Fourier transform infrared spectrophotometric method was described for the determination of quartz, mica(sericite) and feldspar(potassium feldspar) in respirable dust in Taebaek area. The results were as follows; 1) The concentration of minerals were determined from the intensity of absorption peak of quartz at 799 cm-1, sericite at 539 cm-1, and potassium feldspar at 648 cm-1 respectively. 2) The precision(C. V. %) for the quartz determination was 7.70+/-2.68 % from 10 to 200 microgram of quartz. 3) The precision for the sericite determination was 16.34+/-6.82 % from 30 to 500 microgram of serictite. 4) The precision for the potassium feldspar determination was 5.28+/-1.74 % from 30 to 500 microgram of potassium feldspar. 5) The concentration of respirable dust in Taebaek area was 4.90+/-3.29 mg/m3(0.4-93.7%), percent quartz was 1.80+/-4.14% (0.01-20.56%), percent sericite was 11.37+/-6.43% (0.00-29.69%), percent potassium feldspar was 8.15 % (n=7, 3.41-19.70%). 6) The difference of respirable coal dust, quartz, and sericite concentration in drilling, coal cutting, hauling and separating was significant respectively (p<0.05).
Absorption ; Coal ; Dust* ; Fourier Analysis* ; Minerals ; Potassium ; Quartz* ; Spectrophotometry, Infrared*

An apigenin molecularly imprinted polymer was prepared by bulk polymerization using apigenin as template, acrylamide (AA) as a functional monomer, ethylene glycol dimethacrylate (EDMA) as a crosslinking agent, acetonitrile and N, N-dimethylformamide as porogenic solvents, and 2, 2'-azobisisobutyronitrile (AIBN) as an initiator. The interaction between template and functional monomer was proved by ultraviolet visible (UV) spectrophotometry and based on the results, appropriate reaction solvent was selected and the synthesizing process was estimated. The molecularly imprinted polymer structure was analyzed by Fourier Transform Infrared (FT-IR) spectrophotometry. The molecularly imprinted polymer was investigated in equilibrium binding experiment to evaluate its adsorption property, the results showed that the adsorption of apigenin on molecularly imprinted polymer is higher than that on blank polymer in the studied concentration range (0.1-2.5 mmol x L(-1)). Scatchard analysis showed that two classes of binding sites existed in the apigenin imprinted polymers, with their KD and Qmax estimated to be 2.52 x 10(-4), 0.54 x 10(-3) mmol x L(-1) and 2.65, 18.89 micromol x g(-1), respectively. Molecularly imprinted polymer showed higher affinity than blank polymer.
Apigenin ; chemical synthesis ; chemistry ; Molecular Imprinting ; Molecular Structure ; Polymers ; chemical synthesis ; chemistry ; Spectrophotometry, Infrared ; Spectrophotometry, Ultraviolet

To reveal the possible mechanism of silica deposition in higher plants, lignin was isolated from rice straw following a modified method to conduct a simulation experiment in vitro. UV and infrared absorption spectra showed that the substance had the unique characteristics of pure lignin. The presence of silicon in the precipitation was revealed by TEM (transmission electron microscopy) with EDXA (energy dispersive X-ray analysis) device. It was found that in the borax solution where lignin precipitation occurred silica-lignin co-precipitation was produced but not in the DMSO solution where lignin was broken into its composition compounds and did not precipitate. This means that it is macromolecular lignin itself but not its compounds that could induce silica deposition in higher plants.
Lignin ; analysis ; chemistry ; metabolism ; Microscopy, Electron, Transmission ; Oryza ; chemistry ; metabolism ; Silicon Dioxide ; analysis ; chemistry ; metabolism ; Spectrophotometry, Infrared ; Spectrophotometry, Ultraviolet

5R-5-hydroxytriptolide (LLDT-8) is a new drug candidate which is in clinical trial treating rheumatoid arthritis. Polymorph screening of the compound was carried out in this study. Polymorph of LLDT-8 was prepared by evaporative crystallization and antisolvent crystallization methods and was characterized by powder X-ray diffraction (p-XRD), infrared spectrometry (IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TG). It was found that p-XRD patterns, DSC curves, TG curves and IR spectra of the LLDT-8 samples prepared by the above recrystallization methods were all consistent. The 20 of main peaks in the p-XRD patterns appeared at 7.58 degrees, 8.14 degrees, 8.66 degrees, 15.46 degrees, 16.46 degrees, 29.54 degrees, 31.16 degrees and 38.26 degrees, while the infrared absorption peaks appeared at 3 471.3, 2 962.2, 2 887.0, 1 762.6, 1 677.8, 1 432.9, 1 365.4, 1 247.7, 1 080.0, 1 031.7 and 877.5 cm(-1). LLDT-8 was decomposed at 271.2 degrees C based on the determination from DSC and TG. It was showed in single crystal X-ray diffraction study that LLDT-8 crystal was monoclinic with the space group being P2 (1). The cell parameters were found to be: a = 11.460 1 (11), b = 6.320 5 (6), c = 13.028 1 (12), alpha = 90.00, beta = 115.557 (2) and gamma = 90.00. The crystal was a hydrogen-bonded dimmer. The slurry experiments, which were further conducted in solvents with different polarities, confirmed the stability of solid state of LLDT-8 based on the p-XRD determination. The polymorph of LLDT-8 made assurance of its efficacy consistence during its clinical trials.
Calorimetry, Differential Scanning ; Crystallization ; Diterpenes ; chemistry ; Drug Stability ; Spectrophotometry, Infrared ; Thermogravimetry ; X-Ray Diffraction

OBJECTIVETo study the dispersivity of baicalin solid dispersion by Raman spectrometry and infrared spectrometry in order to obtain a new and simple method in examining the dispersivity of solid dispersion.

METHODBaicalin solid dispersion was prepared by solvent method. The Raman spectra, infrared spectra and X-ray powder diffraction patterns of crude baicalin, PVP K30, physical mixture, solid dispersion were acquired by Raman and Fourier transform infrared spectrometers and X-ray powder diffractometry. Then the spectra were compared with each other in order to find out the differences between baicalin solid dispersion and other materials.

RESULTThe result of Raman spectrometry was that amorphous baicalin presented in the solid dispersion, which was in agreement with that of X-ray powder diffractometry.

CONCLUSIONRaman spectrometry which is fast, direct and non-destructive is an ideal method for examining the dispersivity of solid dispersion.

OBJECTIVETo establish a method for rapid detecting nitric oxide (NO) and nitrogen dioxide(NO2) in the workplace air with infrared spectrometer.

METHODSThe method of infrared spectrometer was developed to detect nitrogen oxide in laboratory, then applied to detect the concentration of nitrogen oxide in workplace air. The present method was compared with National Standard Methods.

RESULTSNO and NO2 in air were detected simultaneously with the infrared spectrometer, not interfering each other. In standard condition, the minimum detectable concentrations of NO and NO2 were 0.67 and 1.03 mg/m3, the inferior limits of concentrations were 0.67 and 1.03 mg/m3 respectively. When the concentrations of NO and NO2 were 0.67-133.93 mg/m3 and 1.03-102.68 mg/m3, the accuracy and precision of detection were higher. As compared with National Standard Methods, the ratio of the results of two methods was 86.96% and 112.56%.

CONCLUSIONThe method of infrared spectrometer is a rapid, simple and accurate method for detecting the concentrations of nitrogen oxide in the workplace air.