PURPOSE: The purpose of this study was to develop a dental image processing system using a three-dimensional (3D) camera and stereovision technology. The reliability of the system for measuring axial wall convergence angles was evaluated. MATERIALS AND METHODS: The new system predicted 3D coordinate points from 2D images and calculated distances and angles between points. Two examiners measured axial wall convergence angles for seven artificial abutments using a traditional tracing-based method (TBM) and the stereovision-based method (SVBM). Five wax abutment models of simplified abutment forms were made and axial wall convergence angles of wax models were measured by both methods. The data were statistically analyzed at the level of significance, 0.05. RESULTS: Intraclass correlation coefficients showed excellent intra-examiner and inter-examiner reliabilities for both methods. Bland-Altman plots and paired t-tests showed significant differences between measurements and true values using TBM; differences were not significant with SVBM. CONCLUSION: This study found that the SVBM reflected true angle values more accurately than a TMB and illustrated an example of 3D computer science applied to clinical dentistry.
Dentistry

No abstract available.
Dentistry*

Novel methods producing supplementary and prosthetic material by cutting or discharge processing via computer design have been proposed as alternatives for traditional casting methods and are being utilized for commercial purposes. The CAD/CAM system used in dentistry can be classified into three-dimensional input of target values, restoration design, and material processing. The marginal fidelity in production of In-Ceram core has important clinical implications and is a key consideration issue in CAD/CAM production as well. Through this research, the author arrived at the following conclusion after conducting comparison analysis of marginal fidelities between the In-Ceram core produced via CAD/CAM and that produced through the traditional method: 1. In the cases of mesial, distal, and lingual margins, the core margins via CAD/CAM produced lower values than those via the traditional method, but the differences were found to be statistically insignificant. 2. In the case of labial flange, the core margins via CAD/CAM produced lower values than those via the traditional method and the differences were found to be statistically significant. (p<0.05) 3. In comparision with overall marginal fidelity, the core margins via CAD/CAM produced lower values than those via the traditional method, but the differences were found to be statistically insignificant. 4. Among the core margins produced via the traditional method did not have statistically significant differences but for those produced via CAD/CAM had statistically significant differences between labial and lingual sides and between labial and mesial sides. (p<0.05)
Dentistry

No abstract available.
Dentistry

No abstract available.
Dentistry

PURPOSE: Accurate information is essential in dentistry. The image information of missing teeth is used in optically based medical equipment in prosthodontic treatment. To evaluate oral scanners, the standardized model was examined from cases of image recognition errors of linear discriminant analysis (LDA), and a model that combines the variables with reference to ISO 12836:2015 was designed. MATERIALS AND METHODS: The basic model was fabricated by applying 4 factors to the tooth profile (chamfer, groove, curve, and square) and the bottom surface. Photo-type and video-type scanners were used to analyze 3D images after image capture. The scans were performed several times according to the prescribed sequence to distinguish the model from the one that did not form, and the results confirmed it to be the best. RESULTS: In the case of the initial basic model, a 3D shape could not be obtained by scanning even if several shots were taken. Subsequently, the recognition rate of the image was improved with every variable factor, and the difference depends on the tooth profile and the pattern of the floor surface. CONCLUSION: Based on the recognition error of the LDA, the recognition rate decreases when the model has a similar pattern. Therefore, to obtain the accurate 3D data, the difference of each class needs to be provided when developing a standardized model.
Dentistry ; Tooth

No abstract available.
Dentistry* ; Microbiota*

The school-based dental preventive program has been developed strongly in many areas of the whole country. Especially, the program has been covered at level of province such as Ninh B×nh and Nam §Þnh. Its preventive results were very high. Dental caries were reduced and periodontal status is improved. Through the study of fluoride concentration in the natural water, we determine that the use of fluoride mouthwash for children at school is necessary to reduce dental caries.
Preventive Dentistry

ABSTRACT Teledentistry has been proven to have the potential in addressing the gap in accessing oral health care worldwide. Nevertheless, more information is needed to support evidence-based teledentistry practice in Malaysia. The article aims to review teledentistry in view of implementing it to be a common practice in Malaysia. The authors describe teledentistry application worldwide, as well as its uses in the field of service and education. The article summarises the needs of teledentistry in South East Asia, as well as the ethical perspectives and legal practices. In addition, the article also reviews the opportunities arising from practicing teledentistry, including during the unprecedented COVID-19 pandemic. Following review, teledentistry seems to be a promising path as it could offer solutions to shortages in the workforce, high demand for treatment needs and unequal service distribution due to lack of accessibility in rural areas in Malaysia. Furthermore, teledentistry can extend care to underserved patients and provide opportunities to supplement teaching in dental education. The authors provide recommendations to overcome challenges to ensure a sustainable teledentistry. Incorporating teledentistry into practice in Malaysia is achievable but proper guidelines are required.
Telemedicine ; Dentistry

PURPOSE: The purpose of this study was to compare the qualities of the four different processing chemicals(solutions). MATERIALS AND METHODS: With EP 21 films(Ektaspeed plus film, Kodak Co., USA), nine unexposed and nine exposed films of a step wedge were processed utilizing automatic film processor(XR 24, Durr Co., Germany) for 5 days. During 5 days, the total number of processed films including out-patient's intraoral films were about 400-500 for each brand. Base plus fog density, film density, contrast of processed films were measured with densitometer(model 07-443 digital densitometer, Victoreen Co., USA). These measurements were analyzed for comparison. RESULTS: The results were as follows, 1. For the base plus fog density, there was significant difference among the four chemicals (p<0.05). The sequence of the base plus fog densities was in ascending order by Kodak, X-dol 90, Agfa and Konica. 2. For the film density, all chemicals showed useful range of photographic densities(0.25-2.5). The sequence of the film densities was in ascending order by Kodak, X-dol 90, Konica and Agfa. But there was no statistically significant difference of film density between X-dol and Kodak (p<0.05). 3. The sequence of the contrasts was in ascending order by Konica, X-dol 90, Kodak and Agfa. But there was no statistically significant difference of contrast between X-dol and Konica (p<0.05). CONCLUSION: These results indicated that the four processing chemicals had the clinically useful film density and contrast, but only Kodak processing chemical had useful base plus fog density.
Dentistry* ; Weather