No abstract available.
Cadaver

Objectives: The celiac trunk (CT) is the first major branch of the abdominal aorta and typically gives rise to the left gastric artery (LGA), common hepatic artery (CHA), and splenic artery (SA), which supply blood to the abdominal viscera. Variations in the branching pattern of the CT exist and knowledge of such is crucial when performing surgical, laparoscopic, and angiographic procedures. The aim of this study is to determine the anatomic variations of the CT in adult Filipino cadavers and to compare the proportions of these with those reported in the foreign literature. Methods: Adult Filipino cadavers from the University of the Philippines College of Medicine Anatomy Laboratory were dissected by first year medical students from 2014-2019. The CT and its branches were identified, drawn on a separate piece of paper, and confirmed to be correct and accurate by an anatomist. The data collected from that period was reviewed. Percentages were calculated for the branching patterns identified. A Z-test of Two Populations was used to compare the results of the current study to that of Pinal-Garcia (2018), Pillay (2020) and Venieratos (2013). Results: A total of 107 drawings based on 107 dissected preserved cadavers were reviewed. Ninety-two specimens (85.98%) showed typical branching into the LGA, CHA, and SA. The CT presented as a true tripod (tripus Halleri) in 75 specimens (70.09%) and as a bifurcation with one of the three arteries arising first along the trunk (false tripod) in 17 specimens (15.89%). Nine cadavers (8.41%) showed additional branches arising from the CT and four (3.74%) showed bifurcation of the CT with the third branch arising from a different artery. Conclusion The most common configuration of the CT among Filipino adult cadavers is a true tripod, followed by a false tripod, additional branching, and bifurcation of the CT with the third branch arising elsewhere. The present study most closely resembles the results of the study of Venieratos.
Cadaver

PURPOSE: The purpose of this report is to evaluate the measured values of normal Korean calcaneus by conduct of a cadaveric study. MATERIALS AND METHODS: A total of 42 calcanei were obtained from Korean cadavers. A digital goniometer was used for measurement of Bohler's angle, Gissane angle, posterior facet articular inclination angle, and Fowler-Philip angle of calcaneus. A vernier caliper was used for measurement of the maximal antero-posterior length, maximal transverse width, and maximal height of calcaneus. RESULTS: The average Bohler's angle, Gissane angle, posterior facet articular inclination angle, and Fowler-Philip angle was 32.3degrees+/-5.0degrees, 114.4degrees+/-8.2degrees, 61.2degrees+/-4.4degrees, and 60.3degrees+/-7.6degrees. The average maximal antero-posterior length, maximal transverse width, and maximal height of calcaneus was 74.2+/-3.0 mm, 43.0+/-4.0 mm, and 42.5+/-3.0 mm. CONCLUSION: The measured values of normal Korean calcaneus were lower than the values reported in the international literature. Therefore, development of appropriate instruments reflecting the anatomical characteristics of Koreans will be needed.
Cadaver* ; Calcaneus*

Introduction: Dissecting cadavers to study Human Anatomy is an integral part of first year medical education. The aim of this study was to describe the experiences of the first year medical students during their first day of cadaver dissection. Methods: This study analyzed interviews of three first year medical students, chosen via purposive sampling, who were present during the first day of cadaver dissection in gross anatomy. Interviews were transcribed and analyzed through a Husserlian descriptive phenomenological approach. Results : Five common themes were identified: 1) fear of the unknown, 2) group dynamics, 3) sense of awe and amazement of the cadaver's body, 4) respect for the body, and 5) taming of death as a rite of passage to being a doctor. Conclusion Of the five emergent themes, taming death as a rite of passage to being a doctor is the essence of the experiences of the first year medical students during the first day of cadaver dissection.
Cadaver ; Anatomy

PURPOSE: The purpose of this study was to provide an actual guideline in determining the shape, diameter, and position of the implant in immediate implantation by the measurement of the thickness of facial and palatal plate, the thickness of cortical bone on the facial and palatal plate, the diameter of the root, and the distance between the roots in the cadavers. MATERIALS AND METHODS: The horizontal sections of 20 maxillae were measured and analyzed to obtain the average values. Resin blocks were produced and cut serially at 1 mm intervals from the cervical line to the root apex. Images of each section were obtained and the following measurements were performed: The thickness of the facial and palatal residual bone at each root surface, the thickness of the facial and palatal cortical bone at the interdental region, the diameter of all roots of each section on the faciopalatal and mesiodistal diameter, and the interroot distance. Three specimens with measurements close to the average values were chosen and 3-dimensional images were reconstructed. RESULTS: The thickness of the facial and palatal cortical bone at the interdental region in the maxilla, the buccal cortical bone was thicker in the posterior region compared to the anterior region. The interroot distance of the alveolar bone thickness between the roots increased from anterior to posterior region and from coronal to apical in the maxilla. CONCLUSION: In this study, the limited results of the morphometric analysis of the alveolar ridge using the sections of maxilla in the cadavers may offer the useful information when planning and selecting optimal implant for immediate implantation in the maxilla.
Alveolar Process ; Cadaver ; Maxilla

PURPOSE : The aim of this study was simply assessing linear measurements in the lateral and medial approach, respectively, for bone harvesting using anatomic and three-dimensional (3D) computed tomographic (CT) analyses on a dried cadaveric proximal tibia. In addition, the availability of the three-dimensional computed tomographic (3D-CT) analysis was also estimated. MATERIALS AND METHODS : Ten dried proximal tibia were obtained from five Korean cadavers. Four the reference points, the SM (superior-medial), IM (inferior-medial), SL (superior-lateral), and IL (inferior-lateral) were marked around the tibial tuberosity. The PM (posterior-medial) and PL (posterior-lateral) points were randomly marked at points farthest from the lateral and medial reference points, respectively, in the posterior border of the superior articular surface of both condyles. All measurements were obtained on the dried proximal tibia. After computed tomography had been performed, the three dimensional images were reconstructed using V works 4.0(TM) (Cybermed Inc., Seoul, Korea), and the length between the reference points were measured three dimensionally using the method described above. The error between the mean actual and mean 3D-CT measurements was calculated in order to determine the availability of the three dimensional computed tomographic analysis. RESULTS : The length between the reference points was greatest at the IL-PM, which averaged 65.39 mm+/-10.35. This was followed by the SL-PM with 63.24 mm+/-8.10, the IM-PL with 58.09 mm+/-10.02, and the SM-PL with 51.99 mm+/-9.06. The differences between the IL-PM and SM-PL were 13.4 mm. The mean values were 55.04 mm in the medial approach and 64.32 mm in the lateral approach, and the differences between medial and lateral were 9.28 mm. The error between the mean actual and mean 3D-CT measurements was 0.31% and the standard deviation was 0.28%. CONCLUSION : The anatomical and three dimensional computed tomographic analysis indicates that there was only a 9.28 mm linear difference between the lateral and medial approach. This is consistent with previous studies, which showed that there was little difference between the two approaches in terms of the bone volume. In addition, the error (0.31%) and the standard deviation (0.28%) were considered low, demonstrating high accuracy of 3D-CT. Therefore it can be used in preoperative treatment planning.
Cadaver ; Seoul ; Tibia*

No abstract available.
Cadaver* ; Kidney Transplantation* ; Kidney*

PURPOSE: We wanted to compare the results between cadaveric and radiological measurements of calcaneus. MATERIALS AND METHODS: Sixty three calcaneus of 33 cadavers donated between December 2012 and December 2014 were actually measured. Computed tomography (CT) images of 244 calcaneus in 122 patients of the same age group with cadavers were radiologically measured. Maximum length, maximum width, maximum height, Bohler angle, Gissane angle, Fowler-Phillip angle, and tala-articular angle were measured. RESULTS: In cadaveric measurement, the mean maximal height, length, and width were 41.8+/-3.3 mm, 73.3+/-3.4 mm, and 40.7+/-2.2 mm, respectively. In radiological measurement, the mean maximal height, length, and width were 38.5+/-4.3 mm, 74.0+/-5.7 mm, and 44.7+/-1.4 mm, respectively. In cadaveric measurement, the mean Bohler angle, Gissane angle, Fowler-Phillip angle, and tala-articular angle were 32.1degrees+/-6.2degrees, 110.8degrees+/-8.1degrees, 55.8degrees+/-6.8degrees, and 59.7degrees+/-4.6degrees, respectively. In radiological measurement the mean Bohler angle, Gissane angle, Fowler-Phillip angle, and tala-articular angle were 32.6degrees+/-3.8degrees, 113.7degrees+/-5.7degrees, 62.2degrees+/-3.9degrees, and 61.6degrees+/-6.3degrees, respectively. The mean maximal height was significantly higher in the cadaveric measurement group (p<0.001) and the mean maximal length and width were significantly higher in the radiologic measurement group (p<0.001, p<0.001). The mean Gissane angle, Fowler-Philip angle, and Bohler angle were significantly higher in the CT group (p=0.001, p<0.001, p=0.016, respectively). There was no significant difference in the mean tala-articular angle (p=0.352). CONCLUSION: Significant differences in length parameters were observed between the cadaveric measurement group and the radiologic measurement group. However, no significant differences in angular measurements were observed between the two groups. The authors carefully conclude that radiological measurement values may be different from actual values in the calcaneus.
Cadaver* ; Calcaneus* ; Humans

No abstract available.
Cadaver* ; Fascia Lata* ; Fascia*

OBJECTIVE: When the pedicle screw insertion technique is failed or not applicable, C7 intralaminar screw insertion method has been used as an alternative or salvage fixation method recently. However, profound understanding of anatomy is required for safe application of the bilaterally crossing laminar screw at C7 in clinic. In this cadaveric study, we evaluated the anatomic feasibility of the bilateral crossing intralaminar screw insertion and especially focused on determination of proper screw entry point. METHODS: The C7 vertebrae from 18 adult specimens were studied. Morphometric measurements of the mid-laminar height, the minimum laminar thickness, the maximal screw length, and spino-laminar angle were performed and cross-sectioned vertically at the screw entry point (spino-laminar junction). The sectioned surface was equally divided into 3 parts and maximal thickness and surface area of the parts were measured. All measurements were obtained bilaterally. RESULTS: The mean mid-laminar height was 13.7 mm, mean minimal laminar thickness was 6.6 mm, mean maximal screw length was 24.6 mm, and mean spinolaminar angle was 50.8+/-4.7degrees. Based on the measured laminar thickness, the feasibility of 3.5 mm diameter intralaminar screw application was 83.3% (30 sides laminae out of total 36) when assuming a tolerance of 1 mm on each side. Cross-sectional measurement results showed that the mean maximal thickness of upper, middle, and lower thirds was 5.0 mm, 7.5 mm, and 7.3 mm, respectively, and mean surface area for each part was 21.2 mm2, 46.8 mm2, and 34.7 mm2, respectively. Fourteen (38.9%) sides of laminae would be feasible for 3.5 mm intralaminar screw insertion when upper thirds of C7 spino-laminar junction is the screw entry point. In case of middle and lower thirds of C7 spino-laminar junction, 32 (88.9%) and 28 (77.8%) sides of laminae were feasible for 3.5 mm screw insertion, respectively. CONCLUSION: The vertical cross-sectioned area of middle thirds at C7 spinolaminar junction was the largest area and 3.5 mm screw can be accommodated with 77.8% of feasibility when lower thirds were the screw entry point. Thus, selection of middle and lower thirds for each side of screw entry point in spino-laminar junction would be the safest way to place bilateral crossing laminar screw within the entire lamina. This anatomic study result will help surgeons to place the screw safely and accurately.
Adult ; Cadaver* ; Humans ; Spine