Application of our self-made Kirschner wire connecting rod in difficult extraction of intramedullary implants
10.3760/cma.j.cn115530-20230301-00104
- VernacularTitle:自制克氏针连接杆联合常规髓内钉取出器在难取髓内内置物中的应用
- Author:
Wu WANG
1
;
Facan LI
;
Min ZENG
;
Jie XIE
;
Pengfei LEI
;
Yihe HU
;
Xiaolei FAN
Author Information
1. 新疆医科大学第五附属医院骨科，乌鲁木齐 830011
- Keywords:
Bone nails;
Device removal;
Blood volume;
Intramedullary implants
- From:
Chinese Journal of Orthopaedic Trauma
2023;25(8):684-689
- CountryChina
- Language:Chinese
-
Abstract:
Objective:To report the application of our self-made Kirschner wire connecting rod combined with a conventional intramedullary nail extractor in difficult extraction of intramedullary devices.Methods:From January 2012 to August 2017, 10 patients with a hard-to-remove intramedullary device were treated at Department of Orthopaedics, The Fifth Hospital Affiliated to Xinjiang Medical University. They were 7 males and 3 females with a mean age of (40.0±9.0) years. In cases where no relevant extractor was available for the intramedullary device or it was impossible to connect the extractor connecting rod to the tail of the intramedullary device, the Kirschner wire was bent and pulled through the screw hole or the hole newly drilled at the tail of the intramedullary device to be tied or fixed with a conventional extractor connecting rod to form an effective connection. Next, our self-made Kirschner wire connecting rod was used to pull out the intramedullary device. In this cohort, 7 intramedullary nails in the tibia, 1 femoral intramedullary nail, 1 humeral intramedullary nail, and 1 tibial elastic nail were removed. The difficult extraction was due to "cold welding" of the tail cap of the intramedullary nail in 3 cases, mismatch between the screw rod of the extractor and the tail screw hole of the intramedullary nail in 4 cases, and unavailability of relevant removal tools in 3 cases. The time for intramedullary device removal, blood loss and postoperative adverse reactions were recorded.Results:Of this cohort, 9 patients underwent simple removal of the intramedullary device and 1 patient replacement of the intramedullary device. The total time for removal of an intramedullary device was (2.3±0.8) h, ranging from 1.0 to 3.2 h. The amount of blood loss was (159.0±61.0) mL, ranging from 80 to 250 mL. The follow-up was (14.5±2.2) months, ranging from 11 to 18 months. There was no infection or fracture associated with implant removal.Conclusion:Application of our self-made Kirschner wire connecting rod in combination with a conventional intramedullary nail extractor is an easy operation to successfully extract hard-to-remove intramedullary implants, requiring no more special instruments.
